[Intel-wired-lan] [PATCH] ixgbe: Remove NETIF_F_HW_VLAN_CTAG_FILTER from hw_features

[Jeff Kirsher]

From: Alexander Duyck <alexander.h.duyck at redhat.com>

This change makes it so that the HW_VLAN_CTAG_FILTER bit is not falsely
advertised as being a feature that can be toggled on ixgbe parts.  The
driver was setting the bit in features and letting it be inherited by
hw_features, however the driver was actually ignoring the value of the bit
and just assuming it was always set.  As a result VLAN filtering was always
enabled which is a requirement for SR-IOV, VMDq, DCB, FCoE, and possibly
other features within the adapters.

Signed-off-by: Alexander Duyck <alexander.h.duyck at redhat.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index c696ad72..0b38be8 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -8455,7 +8455,6 @@ skip_sriov:
 			   NETIF_F_IPV6_CSUM |
 			   NETIF_F_HW_VLAN_CTAG_TX |
 			   NETIF_F_HW_VLAN_CTAG_RX |
-			   NETIF_F_HW_VLAN_CTAG_FILTER |
 			   NETIF_F_TSO |
 			   NETIF_F_TSO6 |
 			   NETIF_F_RXHASH |
@@ -8477,6 +8476,7 @@ skip_sriov:
 	}
 
 	netdev->hw_features |= NETIF_F_RXALL;
+	netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
 
 	netdev->vlan_features |= NETIF_F_TSO;
 	netdev->vlan_features |= NETIF_F_TSO6;
-- 
1.9.3