[Intel-wired-lan] [net PATCH 2/2] i40e: start up in VEPA mode by default
Jesse Brandeburg
jesse.brandeburg at intel.com
Fri May 8 22:35:57 UTC 2015
From: Anjali Singhai Jain <anjali.singhai at intel.com>
The patch fixes a bug in the default configuration which
prevented a software bridge loaded on the PF interface from
working correctly because broadcast packets are incorrectly
looped back.
Fix the general case, by loading the driver in VEPA mode Until a
VF or VMDq VSI is added. This way loopback on the Main VSI is
turned off until needed and can resolve the issue of unnecessary
reflection for users that do not have VF or VMDq VSIs setup.
The driver must now coordinate the loopback setting for the Flow
Director (FDIR) VSI to make sure it is in sync with the current
VEB or VEPA mode setting.
The user can still switch bridge modes from the bridge commands and
choose to be in VEPA mode with VF VSIs. Because of hardware
requirements, the call to switch to VEB mode when no VF/VMDqs are
present will be rejected.
NOTE: This patch uses BIT_ULL as that is preferred going forward,
a followup patch in the lower priority queue to net-next will fix
up the remaining 1 << usages.
Change-ID: Ib121ddb18fe4b3c4f52e9deda6fcbeb9105683d1
Signed-off-by: Anjali Singhai Jain <anjali.singhai at intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg at intel.com>
---
drivers/net/ethernet/intel/i40e/i40e.h | 1 +
drivers/net/ethernet/intel/i40e/i40e_debugfs.c | 9 +++++++++
drivers/net/ethernet/intel/i40e/i40e_main.c | 21 ++++++++++++++++----
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 10 +++++++++-
4 files changed, 36 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 33c35d3..e946d75 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -317,6 +317,7 @@ struct i40e_pf {
#endif
#define I40E_FLAG_PORT_ID_VALID (u64)(1 << 28)
#define I40E_FLAG_DCB_CAPABLE (u64)(1 << 29)
+#define I40E_FLAG_VEB_MODE_ENABLED BIT_ULL(40)
/* tracks features that get auto disabled by errors */
u64 auto_disable_flags;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
index 34170ea..da0faf4 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -1021,6 +1021,15 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
goto command_write_done;
}
+ /* By default we are in VEPA mode, if this is the first VF/VMDq
+ * VSI to be added switch to VEB mode.
+ */
+ if (!(pf->flags & I40E_FLAG_VEB_MODE_ENABLED)) {
+ pf->flags |= I40E_FLAG_VEB_MODE_ENABLED;
+ i40e_do_reset_safe(pf,
+ BIT_ULL(__I40E_PF_RESET_REQUESTED));
+ }
+
vsi = i40e_vsi_setup(pf, I40E_VSI_VMDQ2, vsi_seid, 0);
if (vsi)
dev_info(&pf->pdev->dev, "added VSI %d to relay %d\n",
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index a54c144..853eb2f 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -6097,6 +6097,10 @@ static int i40e_reconstitute_veb(struct i40e_veb *veb)
if (ret)
goto end_reconstitute;
+ if (pf->flags & I40E_FLAG_VEB_MODE_ENABLED)
+ veb->bridge_mode = BRIDGE_MODE_VEB;
+ else
+ veb->bridge_mode = BRIDGE_MODE_VEPA;
i40e_config_bridge_mode(veb);
/* create the remaining VSIs attached to this VEB */
@@ -8031,7 +8035,12 @@ static int i40e_ndo_bridge_setlink(struct net_device *dev,
} else if (mode != veb->bridge_mode) {
/* Existing HW bridge but different mode needs reset */
veb->bridge_mode = mode;
- i40e_do_reset(pf, (1 << __I40E_PF_RESET_REQUESTED));
+ /* TODO: If no VFs or VMDq VSIs, disallow VEB mode */
+ if (mode == BRIDGE_MODE_VEB)
+ pf->flags |= I40E_FLAG_VEB_MODE_ENABLED;
+ else
+ pf->flags &= ~I40E_FLAG_VEB_MODE_ENABLED;
+ i40e_do_reset(pf, BIT_ULL(__I40E_PF_RESET_REQUESTED));
break;
}
}
@@ -8343,11 +8352,12 @@ static int i40e_add_vsi(struct i40e_vsi *vsi)
ctxt.uplink_seid = vsi->uplink_seid;
ctxt.connection_type = I40E_AQ_VSI_CONN_TYPE_NORMAL;
ctxt.flags = I40E_AQ_VSI_TYPE_PF;
- if (i40e_is_vsi_uplink_mode_veb(vsi)) {
+ if ((pf->flags & I40E_FLAG_VEB_MODE_ENABLED) &&
+ (i40e_is_vsi_uplink_mode_veb(vsi))) {
ctxt.info.valid_sections |=
- cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID);
+ cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID);
ctxt.info.switch_id =
- cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
+ cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
}
i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, true);
break;
@@ -8746,6 +8756,9 @@ struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf, u8 type,
__func__);
return NULL;
}
+ /* We come up by default in VEPA mode */
+ veb->bridge_mode = BRIDGE_MODE_VEPA;
+ pf->flags &= ~I40E_FLAG_VEB_MODE_ENABLED;
i40e_config_bridge_mode(veb);
}
for (i = 0; i < I40E_MAX_VEB && !veb; i++) {
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 78d1c4f..4e9376d 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -1018,11 +1018,19 @@ int i40e_pci_sriov_configure(struct pci_dev *pdev, int num_vfs)
{
struct i40e_pf *pf = pci_get_drvdata(pdev);
- if (num_vfs)
+ if (num_vfs) {
+ if (!(pf->flags & I40E_FLAG_VEB_MODE_ENABLED)) {
+ pf->flags |= I40E_FLAG_VEB_MODE_ENABLED;
+ i40e_do_reset_safe(pf,
+ BIT_ULL(__I40E_PF_RESET_REQUESTED));
+ }
return i40e_pci_sriov_enable(pdev, num_vfs);
+ }
if (!pci_vfs_assigned(pf->pdev)) {
i40e_free_vfs(pf);
+ pf->flags &= ~I40E_FLAG_VEB_MODE_ENABLED;
+ i40e_do_reset_safe(pf, BIT_ULL(__I40E_PF_RESET_REQUESTED));
} else {
dev_warn(&pdev->dev, "Unable to free VFs because some are assigned to VMs.\n");
return -EINVAL;
More information about the Intel-wired-lan
mailing list