[Intel-wired-lan] [PATCH] ixgbe: Update PTP to support X550EM_x devices
Mark D Rustad
mark.d.rustad at intel.com
Fri Oct 23 00:54:42 UTC 2015
The X550EM_x devices handle clocking differently, so update the
PTP implementation to accommodate them. This involves signicant
changes to ixgbe's PTP code to accommodate the new range of
behaviors including things like non-power-of-2 clock wrapping.
Signed-off-by: Mark Rustad <mark.d.rustad at intel.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe.h | 13
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 9
drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c | 707 ++++++++++++++++++-------
drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 1
4 files changed, 538 insertions(+), 192 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index 1d2174526a4c..901feac8be03 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -639,6 +639,8 @@ struct ixgbe_adapter {
#define IXGBE_FLAG_SRIOV_CAPABLE (u32)(1 << 22)
#define IXGBE_FLAG_SRIOV_ENABLED (u32)(1 << 23)
#define IXGBE_FLAG_VXLAN_OFFLOAD_CAPABLE BIT(24)
+#define IXGBE_FLAG_RX_HWTSTAMP_ENABLED BIT(25)
+#define IXGBE_FLAG_RX_HWTSTAMP_IN_REGISTER BIT(26)
u32 flags2;
#define IXGBE_FLAG2_RSC_CAPABLE (u32)(1 << 0)
@@ -755,9 +757,12 @@ struct ixgbe_adapter {
unsigned long last_rx_ptp_check;
unsigned long last_rx_timestamp;
spinlock_t tmreg_lock;
- struct cyclecounter cc;
- struct timecounter tc;
+ struct cyclecounter hw_cc;
+ struct timecounter hw_tc;
u32 base_incval;
+ u32 tx_hwtstamp_timeouts;
+ u32 rx_hwtstamp_cleared;
+ void (*ptp_setup_sdp)(struct ixgbe_adapter *);
/* SR-IOV */
DECLARE_BITMAP(active_vfs, IXGBE_MAX_VF_FUNCTIONS);
@@ -968,12 +973,12 @@ void ixgbe_ptp_suspend(struct ixgbe_adapter *adapter);
void ixgbe_ptp_stop(struct ixgbe_adapter *adapter);
void ixgbe_ptp_overflow_check(struct ixgbe_adapter *adapter);
void ixgbe_ptp_rx_hang(struct ixgbe_adapter *adapter);
-void ixgbe_ptp_rx_hwtstamp(struct ixgbe_adapter *adapter, struct sk_buff *skb);
+void ixgbe_ptp_rx_rgtstamp(struct ixgbe_q_vector *, struct sk_buff *skb);
int ixgbe_ptp_set_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr);
int ixgbe_ptp_get_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr);
void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter);
void ixgbe_ptp_reset(struct ixgbe_adapter *adapter);
-void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter, u32 eicr);
+void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter);
#ifdef CONFIG_PCI_IOV
void ixgbe_sriov_reinit(struct ixgbe_adapter *adapter);
#endif
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 391f39b2776f..1752a0ebdee2 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1632,6 +1632,7 @@ static void ixgbe_process_skb_fields(struct ixgbe_ring *rx_ring,
struct sk_buff *skb)
{
struct net_device *dev = rx_ring->netdev;
+ u32 flags = rx_ring->q_vector->adapter->flags;
ixgbe_update_rsc_stats(rx_ring, skb);
@@ -1639,8 +1640,8 @@ static void ixgbe_process_skb_fields(struct ixgbe_ring *rx_ring,
ixgbe_rx_checksum(rx_ring, rx_desc, skb);
- if (unlikely(ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_STAT_TS)))
- ixgbe_ptp_rx_hwtstamp(rx_ring->q_vector->adapter, skb);
+ if (unlikely(flags & IXGBE_FLAG_RX_HWTSTAMP_ENABLED))
+ ixgbe_ptp_rx_rgtstamp(rx_ring->q_vector, skb);
if ((dev->features & NETIF_F_HW_VLAN_CTAG_RX) &&
ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_VP)) {
@@ -2738,7 +2739,7 @@ static irqreturn_t ixgbe_msix_other(int irq, void *data)
ixgbe_check_fan_failure(adapter, eicr);
if (unlikely(eicr & IXGBE_EICR_TIMESYNC))
- ixgbe_ptp_check_pps_event(adapter, eicr);
+ ixgbe_ptp_check_pps_event(adapter);
/* re-enable the original interrupt state, no lsc, no queues */
if (!test_bit(__IXGBE_DOWN, &adapter->state))
@@ -2945,7 +2946,7 @@ static irqreturn_t ixgbe_intr(int irq, void *data)
ixgbe_check_fan_failure(adapter, eicr);
if (unlikely(eicr & IXGBE_EICR_TIMESYNC))
- ixgbe_ptp_check_pps_event(adapter, eicr);
+ ixgbe_ptp_check_pps_event(adapter);
/* would disable interrupts here but EIAM disabled it */
napi_schedule_irqoff(&q_vector->napi);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
index e5ba04025e2b..aed9b92e907e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2013 Intel Corporation.
+ Copyright(c) 1999 - 2015 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -93,7 +93,6 @@
#define IXGBE_INCVAL_SHIFT_82599 7
#define IXGBE_INCPER_SHIFT_82599 24
-#define IXGBE_MAX_TIMEADJ_VALUE 0x7FFFFFFFFFFFFFFFULL
#define IXGBE_OVERFLOW_PERIOD (HZ * 30)
#define IXGBE_PTP_TX_TIMEOUT (HZ * 15)
@@ -104,8 +103,68 @@
*/
#define IXGBE_PTP_PPS_HALF_SECOND 500000000ULL
+/* In contrast, the X550 controller has two registers, SYSTIMEH and SYSTIMEL
+ * which contain measurements of seconds and nanoseconds respectively. This
+ * matches the standard linux representation of time in the kernel. In addition,
+ * the X550 also has a SYSTIMER register which represents residue, or
+ * subnanosecond overflow adjustments. To control clock adjustment, the TIMINCA
+ * register is used, but it is unlike the X540 and 82599 devices. TIMINCA
+ * represents units of 2^-32 nanoseconds, and uses 31 bits for this, with the
+ * high bit representing whether the adjustent is positive or negative. Every
+ * clock cycle, the X550 will add 12.5 ns + TIMINCA which can result in a range
+ * of 12 to 13 nanoseconds adjustment. Unlike the 82599 and X540 devices, the
+ * X550's clock for purposes of SYSTIME generation is constant and not dependant
+ * on the link speed.
+ *
+ * SYSTIMEH SYSTIMEL SYSTIMER
+ * +--------------+ +--------------+ +-------------+
+ * X550 | 32 | | 32 | | 32 |
+ * *--------------+ +--------------+ +-------------+
+ * \____seconds___/ \_nanoseconds_/ \__2^-32 ns__/
+ *
+ * This results in a full 96 bits to represent the clock, with 32 bits for
+ * seconds, 32 bits for nanoseconds (largest value is 0d999999999 or just under
+ * 1 second) and an additional 32 bits to measure sub nanosecond adjustments for
+ * underflow of adjustments.
+ *
+ * The 32 bits of seconds for the X550 overflows every
+ * 2^32 / ( 365.25 * 24 * 60 * 60 ) = ~136 years.
+ *
+ * In order to adjust the clock frequency for the X550, the TIMINCA register is
+ * provided. This register represents a + or minus nearly 0.5 ns adjustment to
+ * the base frequency. It is measured in 2^-32 ns units, with the high bit being
+ * the sign bit. This register enables software to calculate frequency
+ * adjustments and apply them directly to the clock rate.
+ *
+ * The math for converting ppb into TIMINCA values is fairly straightforward.
+ * TIMINCA value = ( Base_Frequency * ppb ) / 1000000000ULL
+ *
+ * This assumes that ppb is never high enough to create a value bigger than
+ * TIMINCA's 31 bits can store. This is ensured by the stack. Calculating this
+ * value is also simple.
+ * Max ppb = ( Max Adjustment / Base Frequency ) / 1000000000ULL
+ *
+ * For the X550, the Max adjustment is +/- 0.5 ns, and the base frequency is
+ * 12.5 nanoseconds. This means that the Max ppb is 39999999
+ * Note: We subtract one in order to ensure no overflow, because the TIMINCA
+ * register can only hold slightly under 0.5 nanoseconds.
+ *
+ * Because TIMINCA is measured in 2^-32 ns units, we have to convert 12.5 ns
+ * into 2^-32 units, which is
+ *
+ * 12.5 * 2^32 = C80000000
+ *
+ * Some revisions of hardware have a faster base frequency than the registers
+ * were defined for. To fix this, we use a timecounter structure with the
+ * proper mult and shift to convert the cycles into nanoseconds of time.
+ */
+#define IXGBE_X550_BASE_PERIOD 0xC80000000ULL
+#define INCVALUE_MASK 0x7FFFFFFF
+#define ISGN 0x80000000
+#define MAX_TIMADJ 0x7FFFFFFF
+
/**
- * ixgbe_ptp_setup_sdp
+ * ixgbe_ptp_setup_sdp_x540
* @hw: the hardware private structure
*
* this function enables or disables the clock out feature on SDP0 for
@@ -116,80 +175,112 @@
* aligns the start of the PPS signal to that value. The shift is
* necessary because it can change based on the link speed.
*/
-static void ixgbe_ptp_setup_sdp(struct ixgbe_adapter *adapter)
+static void ixgbe_ptp_setup_sdp_x540(struct ixgbe_adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
- int shift = adapter->cc.shift;
+ int shift = adapter->hw_cc.shift;
u32 esdp, tsauxc, clktiml, clktimh, trgttiml, trgttimh, rem;
u64 ns = 0, clock_edge = 0;
- if ((adapter->flags2 & IXGBE_FLAG2_PTP_PPS_ENABLED) &&
- (hw->mac.type == ixgbe_mac_X540)) {
+ /* disable the pin first */
+ IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, 0x0);
+ IXGBE_WRITE_FLUSH(hw);
- /* disable the pin first */
- IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, 0x0);
- IXGBE_WRITE_FLUSH(hw);
+ if (!(adapter->flags2 & IXGBE_FLAG2_PTP_PPS_ENABLED))
+ return;
- esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
- /*
- * enable the SDP0 pin as output, and connected to the
- * native function for Timesync (ClockOut)
- */
- esdp |= (IXGBE_ESDP_SDP0_DIR |
- IXGBE_ESDP_SDP0_NATIVE);
+ /* enable the SDP0 pin as output, and connected to the
+ * native function for Timesync (ClockOut)
+ */
+ esdp |= IXGBE_ESDP_SDP0_DIR |
+ IXGBE_ESDP_SDP0_NATIVE;
- /*
- * enable the Clock Out feature on SDP0, and allow
- * interrupts to occur when the pin changes
- */
- tsauxc = (IXGBE_TSAUXC_EN_CLK |
- IXGBE_TSAUXC_SYNCLK |
- IXGBE_TSAUXC_SDP0_INT);
+ /* enable the Clock Out feature on SDP0, and allow
+ * interrupts to occur when the pin changes
+ */
+ tsauxc = IXGBE_TSAUXC_EN_CLK |
+ IXGBE_TSAUXC_SYNCLK |
+ IXGBE_TSAUXC_SDP0_INT;
- /* clock period (or pulse length) */
- clktiml = (u32)(IXGBE_PTP_PPS_HALF_SECOND << shift);
- clktimh = (u32)((IXGBE_PTP_PPS_HALF_SECOND << shift) >> 32);
+ /* clock period (or pulse length) */
+ clktiml = (u32)(IXGBE_PTP_PPS_HALF_SECOND << shift);
+ clktimh = (u32)((IXGBE_PTP_PPS_HALF_SECOND << shift) >> 32);
- /*
- * Account for the cyclecounter wrap-around value by
- * using the converted ns value of the current time to
- * check for when the next aligned second would occur.
- */
- clock_edge |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIML);
- clock_edge |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIMH) << 32;
- ns = timecounter_cyc2time(&adapter->tc, clock_edge);
+ /* Account for the cyclecounter wrap-around value by
+ * using the converted ns value of the current time to
+ * check for when the next aligned second would occur.
+ */
+ clock_edge |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIML);
+ clock_edge |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIMH) << 32;
+ ns = timecounter_cyc2time(&adapter->hw_tc, clock_edge);
- div_u64_rem(ns, IXGBE_PTP_PPS_HALF_SECOND, &rem);
- clock_edge += ((IXGBE_PTP_PPS_HALF_SECOND - (u64)rem) << shift);
+ div_u64_rem(ns, IXGBE_PTP_PPS_HALF_SECOND, &rem);
+ clock_edge += ((IXGBE_PTP_PPS_HALF_SECOND - (u64)rem) << shift);
- /* specify the initial clock start time */
- trgttiml = (u32)clock_edge;
- trgttimh = (u32)(clock_edge >> 32);
+ /* specify the initial clock start time */
+ trgttiml = (u32)clock_edge;
+ trgttimh = (u32)(clock_edge >> 32);
- IXGBE_WRITE_REG(hw, IXGBE_CLKTIML, clktiml);
- IXGBE_WRITE_REG(hw, IXGBE_CLKTIMH, clktimh);
- IXGBE_WRITE_REG(hw, IXGBE_TRGTTIML0, trgttiml);
- IXGBE_WRITE_REG(hw, IXGBE_TRGTTIMH0, trgttimh);
+ IXGBE_WRITE_REG(hw, IXGBE_CLKTIML, clktiml);
+ IXGBE_WRITE_REG(hw, IXGBE_CLKTIMH, clktimh);
+ IXGBE_WRITE_REG(hw, IXGBE_TRGTTIML0, trgttiml);
+ IXGBE_WRITE_REG(hw, IXGBE_TRGTTIMH0, trgttimh);
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
- IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, tsauxc);
- } else {
- IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, 0x0);
- }
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, tsauxc);
IXGBE_WRITE_FLUSH(hw);
}
/**
- * ixgbe_ptp_read - read raw cycle counter (to be used by time counter)
+ * ixgbe_ptp_read_X550 - read cycle counter value
+ * @hw_cc: cyclecounter structure
+ *
+ * This function reads SYSTIME registers. It is called by the cyclecounter
+ * structure to convert from internal representation into nanoseconds. We need
+ * this for X550 since some skews do not have expected clock frequency and
+ * result of SYSTIME is 32bits of "billions of cycles" and 32 bits of
+ * "cycles", rather than seconds and nanoseconds.
+ */
+static cycle_t ixgbe_ptp_read_X550(const struct cyclecounter *hw_cc) {
+ struct ixgbe_adapter *adapter =
+ container_of(hw_cc, struct ixgbe_adapter, hw_cc);
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct timespec64 ts;
+
+ /* storage is 32 bits of 'billions of cycles' and 32 bits of 'cycles'.
+ * Some revisions of hardware run at a higher frequency and so the
+ * cycles are not guaranteed to be nanoseconds. The timespec64 created
+ * here is used for its math/conversions but does not necessarily
+ * represent nominal time.
+ *
+ * It should be noted that this cyclecounter will overflow at a
+ * non-bitmask field since we have to convert our billions of cycles
+ * into an actual cycles count. This results in some possible weird
+ * situations at high cycle counter stamps. However given that 32 bits
+ * of "seconds" is ~138 years this isn't a problem. Even at the
+ * increased frequency of some revisions, this is still ~103 years.
+ * Since the SYSTIME values start at 0 and we never write them, it is
+ * highly unlikely for the cyclecounter to overflow in practice.
+ */
+ IXGBE_READ_REG(hw, IXGBE_SYSTIMR);
+ ts.tv_nsec = IXGBE_READ_REG(hw, IXGBE_SYSTIML);
+ ts.tv_sec = IXGBE_READ_REG(hw, IXGBE_SYSTIMH);
+
+ return (u64)timespec64_to_ns(&ts);
+}
+
+/**
+ * ixgbe_ptp_read_82599 - read raw cycle counter (to be used by time counter)
* @cc: the cyclecounter structure
*
* this function reads the cyclecounter registers and is called by the
* cyclecounter structure used to construct a ns counter from the
* arbitrary fixed point registers
*/
-static cycle_t ixgbe_ptp_read(const struct cyclecounter *cc)
+static cycle_t ixgbe_ptp_read_82599(const struct cyclecounter *cc)
{
struct ixgbe_adapter *adapter =
container_of(cc, struct ixgbe_adapter, cc);
@@ -203,20 +294,79 @@ static cycle_t ixgbe_ptp_read(const struct cyclecounter *cc)
}
/**
- * ixgbe_ptp_adjfreq
+ * ixgbe_ptp_convert_to_hwtstamp - convert register value to hw timestamp
+ * @adapter: private adapter structure
+ * @hwtstamp: stack timestamp structure
+ * @systim: unsigned 64bit system time value
+ *
+ * We need to convert the adapter's RX/TXSTMP registers into a hwtstamp value
+ * which can be used by the stack's ptp functions.
+ *
+ * The lock is used to protect consistency of the cyclecounter and the SYSTIME
+ * registers. However, it does not need to protect against the Rx or Tx
+ * timestamp registers, as there can't be a new timestamp until the old one is
+ * unlatched by reading.
+ *
+ * In addition to the timestamp in hardware, some controllers need a software
+ * overflow cyclecounter, and this function takes this into account as well.
+ **/
+static void ixgbe_ptp_convert_to_hwtstamp(struct ixgbe_adapter *adapter,
+ struct skb_shared_hwtstamps *hwtstamp,
+ u64 timestamp)
+{
+ unsigned long flags;
+ struct timespec64 systime;
+ u64 ns;
+
+ memset(hwtstamp, 0, sizeof(*hwtstamp));
+
+ switch (adapter->hw.mac.type) {
+ /* X550 and later hardware supposedly represent time using a seconds
+ * and nanoseconds counter, instead of raw 64bits nanoseconds. We need
+ * to convert the timestamp into cycles before it can be fed to the
+ * cyclecounter. We need an actual cyclecounter because some revisions
+ * of hardware run at a higher frequency and thus the counter does
+ * not represent seconds/nanoseconds. Instead it can be thought of as
+ * cycles and billions of cycles.
+ */
+ case ixgbe_mac_X550:
+ case ixgbe_mac_X550EM_x:
+ /* Upper 32 bits represent billions of cycles, lower 32 bits
+ * represent cycles. However, we use timespec64_to_ns for the
+ * correct math even though the units haven't been corrected
+ * yet.
+ */
+ systime.tv_sec = timestamp >> 32;
+ systime.tv_nsec = timestamp & 0xFFFFFFFF;
+
+ timestamp = timespec64_to_ns(&systime);
+ break;
+ default:
+ break;
+ }
+
+ spin_lock_irqsave(&adapter->tmreg_lock, flags);
+ ns = timecounter_cyc2time(&adapter->hw_tc, timestamp);
+ spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
+
+ hwtstamp->hwtstamp = ns_to_ktime(ns);
+}
+
+/**
+ * ixgbe_ptp_adjfreq_82599
* @ptp: the ptp clock structure
* @ppb: parts per billion adjustment from base
*
* adjust the frequency of the ptp cycle counter by the
* indicated ppb from the base frequency.
*/
-static int ixgbe_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
+static int ixgbe_ptp_adjfreq_82599(struct ptp_clock_info *ptp, s32 ppb)
{
struct ixgbe_adapter *adapter =
container_of(ptp, struct ixgbe_adapter, ptp_caps);
struct ixgbe_hw *hw = &adapter->hw;
- u64 freq;
- u32 diff, incval;
+ u64 freq, incval;
+ u32 diff;
int neg_adj = 0;
if (ppb < 0) {
@@ -235,12 +385,16 @@ static int ixgbe_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
switch (hw->mac.type) {
case ixgbe_mac_X540:
- IXGBE_WRITE_REG(hw, IXGBE_TIMINCA, incval);
+ if (incval > 0xFFFFFFFFULL)
+ e_dev_warn("PTP ppb adjusted SYSTIME rate overflowed!\n");
+ IXGBE_WRITE_REG(hw, IXGBE_TIMINCA, (u32)incval);
break;
case ixgbe_mac_82599EB:
+ if (incval > 0x00FFFFFFULL)
+ e_dev_warn("PTP ppb adjusted SYSTIME rate overflowed!\n");
IXGBE_WRITE_REG(hw, IXGBE_TIMINCA,
(1 << IXGBE_INCPER_SHIFT_82599) |
- incval);
+ (u32)incval & 0x00FFFFFFUL);
break;
default:
break;
@@ -250,6 +404,43 @@ static int ixgbe_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
}
/**
+ * ixgbe_ptp_adjfreq_X550
+ * @ptp: the ptp clock structure
+ * @ppb: parts per billion adjustment from base
+ *
+ * adjust the frequency of the SYSTIME registers by the indicated ppb from base
+ * frequency
+ */
+static int ixgbe_ptp_adjfreq_X550(struct ptp_clock_info *ptp, s32 ppb)
+{
+ struct ixgbe_adapter *adapter =
+ container_of(ptp, struct ixgbe_adapter, ptp_caps);
+ struct ixgbe_hw *hw = &adapter->hw;
+ int neg_adj = 0;
+ u64 rate = IXGBE_X550_BASE_PERIOD;
+ u32 inca;
+
+ if (ppb < 0) {
+ neg_adj = 1;
+ ppb = -ppb;
+ }
+ rate *= ppb;
+ rate = div_u64(rate, 1000000000ULL);
+
+ /* warn if rate is too large */
+ if (rate >= INCVALUE_MASK)
+ e_dev_warn("PTP ppb adjusted SYSTIME rate overflowed!\n");
+
+ inca = rate & INCVALUE_MASK;
+ if (neg_adj)
+ inca |= ISGN;
+
+ IXGBE_WRITE_REG(hw, IXGBE_TIMINCA, inca);
+
+ return 0;
+}
+
+/**
* ixgbe_ptp_adjtime
* @ptp: the ptp clock structure
* @delta: offset to adjust the cycle counter by
@@ -266,7 +457,8 @@ static int ixgbe_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
timecounter_adjtime(&adapter->tc, delta);
spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
- ixgbe_ptp_setup_sdp(adapter);
+ if (adapter->ptp_setup_sdp)
+ adapter->ptp_setup_sdp(adapter);
return 0;
}
@@ -283,11 +475,11 @@ static int ixgbe_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
{
struct ixgbe_adapter *adapter =
container_of(ptp, struct ixgbe_adapter, ptp_caps);
- u64 ns;
unsigned long flags;
+ u64 ns;
spin_lock_irqsave(&adapter->tmreg_lock, flags);
- ns = timecounter_read(&adapter->tc);
+ ns = timecounter_read(&adapter->hw_tc);
spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
*ts = ns_to_timespec64(ns);
@@ -308,17 +500,16 @@ static int ixgbe_ptp_settime(struct ptp_clock_info *ptp,
{
struct ixgbe_adapter *adapter =
container_of(ptp, struct ixgbe_adapter, ptp_caps);
- u64 ns;
unsigned long flags;
-
- ns = timespec64_to_ns(ts);
+ u64 ns = timespec64_to_ns(ts);
/* reset the timecounter */
spin_lock_irqsave(&adapter->tmreg_lock, flags);
- timecounter_init(&adapter->tc, &adapter->cc, ns);
+ timecounter_init(&adapter->tc, &adapter->hw_cc, ns);
spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
- ixgbe_ptp_setup_sdp(adapter);
+ if (adapter->ptp_setup_sdp)
+ adapter->ptp_setup_sdp(adapter);
return 0;
}
@@ -343,33 +534,26 @@ static int ixgbe_ptp_feature_enable(struct ptp_clock_info *ptp,
* event when the clock SDP triggers. Clear mask when PPS is
* disabled
*/
- if (rq->type == PTP_CLK_REQ_PPS) {
- switch (adapter->hw.mac.type) {
- case ixgbe_mac_X540:
- if (on)
- adapter->flags2 |= IXGBE_FLAG2_PTP_PPS_ENABLED;
- else
- adapter->flags2 &= ~IXGBE_FLAG2_PTP_PPS_ENABLED;
-
- ixgbe_ptp_setup_sdp(adapter);
- return 0;
- default:
- break;
- }
- }
+ if (rq->type != PTP_CLK_REQ_PPS || !adapter->ptp_setup_sdp)
+ return -ENOTSUPP;
+
+ if (on)
+ adapter->flags2 |= IXGBE_FLAG2_PTP_PPS_ENABLED;
+ else
+ adapter->flags2 &= ~IXGBE_FLAG2_PTP_PPS_ENABLED;
- return -ENOTSUPP;
+ adapter->ptp_setup_sdp(adapter);
+ return 0;
}
/**
* ixgbe_ptp_check_pps_event
* @adapter: the private adapter structure
- * @eicr: the interrupt cause register value
*
* This function is called by the interrupt routine when checking for
* interrupts. It will check and handle a pps event.
*/
-void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter, u32 eicr)
+void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
struct ptp_clock_event event;
@@ -426,6 +610,7 @@ void ixgbe_ptp_rx_hang(struct ixgbe_adapter *adapter)
struct ixgbe_hw *hw = &adapter->hw;
u32 tsyncrxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCRXCTL);
unsigned long rx_event;
+ int n;
/* if we don't have a valid timestamp in the registers, just update the
* timeout counter and exit
@@ -437,19 +622,43 @@ void ixgbe_ptp_rx_hang(struct ixgbe_adapter *adapter)
/* determine the most recent watchdog or rx_timestamp event */
rx_event = adapter->last_rx_ptp_check;
- if (time_after(adapter->last_rx_timestamp, rx_event))
- rx_event = adapter->last_rx_timestamp;
+ for (n = 0; n < adapter->num_rx_queues; n++) {
+ rx_ring = adapter->rx_ring[n];
+ if (time_after(rx_ring->last_rx_timestamp, rx_event))
+ rx_event = rx_ring->last_rx_timestamp;
+ }
/* only need to read the high RXSTMP register to clear the lock */
if (time_is_before_jiffies(rx_event + 5*HZ)) {
IXGBE_READ_REG(hw, IXGBE_RXSTMPH);
adapter->last_rx_ptp_check = jiffies;
+ adapter->rx_hwtstamp_cleared++;
e_warn(drv, "clearing RX Timestamp hang\n");
}
}
/**
+ * ixgbe_ptp_clear_tx_timestamp - utility function to clear Tx timestamp state
+ * @adapter: the private adapter structure
+ *
+ * This function should be called whenever the state related to a Tx timestamp
+ * needs to be cleared. This helps ensure that all related bits are reset for
+ * the next Tx timestamp event.
+ */
+static void ixgbe_ptp_clear_tx_timestamp(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ IXGBE_READ_REG(hw, IXGBE_TXSTMPH);
+ if (adapter->ptp_tx_skb) {
+ dev_kfree_skb_any(adapter->ptp_tx_skb);
+ adapter->ptp_tx_skb = NULL;
+ }
+ clear_bit_unlock(__IXGBE_PTP_TX_IN_PROGRESS, &adapter->state);
+}
+
+/**
* ixgbe_ptp_tx_hwtstamp - utility function which checks for TX time stamp
* @adapter: the private adapter struct
*
@@ -467,17 +676,10 @@ static void ixgbe_ptp_tx_hwtstamp(struct ixgbe_adapter *adapter)
regval |= (u64)IXGBE_READ_REG(hw, IXGBE_TXSTMPL);
regval |= (u64)IXGBE_READ_REG(hw, IXGBE_TXSTMPH) << 32;
- spin_lock_irqsave(&adapter->tmreg_lock, flags);
- ns = timecounter_cyc2time(&adapter->tc, regval);
- spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
-
- memset(&shhwtstamps, 0, sizeof(shhwtstamps));
- shhwtstamps.hwtstamp = ns_to_ktime(ns);
+ ixgbe_ptp_convert_to_hwtstamp(adapter, &shhwtstamps, regval);
skb_tstamp_tx(adapter->ptp_tx_skb, &shhwtstamps);
- dev_kfree_skb_any(adapter->ptp_tx_skb);
- adapter->ptp_tx_skb = NULL;
- clear_bit_unlock(__IXGBE_PTP_TX_IN_PROGRESS, &adapter->state);
+ ixgbe_ptp_clear_tx_timestamp(adapter);
}
/**
@@ -497,38 +699,85 @@ static void ixgbe_ptp_tx_hwtstamp_work(struct work_struct *work)
IXGBE_PTP_TX_TIMEOUT);
u32 tsynctxctl;
- if (timeout) {
- dev_kfree_skb_any(adapter->ptp_tx_skb);
- adapter->ptp_tx_skb = NULL;
- clear_bit_unlock(__IXGBE_PTP_TX_IN_PROGRESS, &adapter->state);
- e_warn(drv, "clearing Tx Timestamp hang\n");
+ /* we have to have a valid skb to poll for a timestamp */
+ if (!adapter->ptp_tx_skb) {
+ ixgbe_ptp_clear_tx_timestamp(adapter);
return;
}
+ /* stop polling once we have a valid timestamp */
tsynctxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCTXCTL);
- if (tsynctxctl & IXGBE_TSYNCTXCTL_VALID)
+ if (tsynctxctl & IXGBE_TSYNCTXCTL_VALID) {
ixgbe_ptp_tx_hwtstamp(adapter);
- else
+ return;
+ }
+
+ if (timeout) {
+ ixgbe_ptp_clear_tx_timestamp(adapter);
+ adapter->tx_hwtstamp_timeouts++;
+ e_warn(drv, "clearing Tx Timestamp hang\n");
+ } else {
/* reschedule to keep checking if it's not available yet */
schedule_work(&adapter->ptp_tx_work);
+ }
}
/**
- * ixgbe_ptp_rx_hwtstamp - utility function which checks for RX time stamp
- * @adapter: pointer to adapter struct
+ * ixgbe_ptp_rx_pktstamp - utility function to get RX time stamp from buffer
+ * @q_vector: structure containing interrupt and ring information
+ * @skb: the packet
+ *
+ * This function will be called by the Rx routine of the timestamp for this
+ * packet is stored in the buffer. The value is stored in little endian format
+ * starting at the end of the packet data.
+ */
+void ixgbe_ptp_rx_pktstamp(struct ixgbe_q_vector *q_vector,
+ struct sk_buff *skb)
+{
+ __le64 regval;
+
+ /* copy the bits out of the skb, and then trim the skb length */
+ skb_copy_bits(skb, skb->len - IXGBE_TS_HDR_LEN, ®val,
+ IXGBE_TS_HDR_LEN);
+ __pskb_trim(skb, skb->len - IXGBE_TS_HDR_LEN);
+
+ /* The timestamp is recorded in little endian format, and is stored at
+ * the end of the packet.
+ *
+ * DWORD: N N + 1 N + 2
+ * Field: End of Packet SYSTIMH SYSTIML
+ */
+ ixgbe_ptp_convert_to_hwtstamp(q_vector->adapter, skb_hwtstamps(skb),
+ le64_to_cpu(regval));
+}
+
+/**
+ * ixgbe_ptp_rx_rgtstamp - utility function which checks for RX time stamp
+ * @q_vector: structure containing interrupt and ring information
* @skb: particular skb to send timestamp with
*
* if the timestamp is valid, we convert it into the timecounter ns
* value, then store that result into the shhwtstamps structure which
* is passed up the network stack
*/
-void ixgbe_ptp_rx_hwtstamp(struct ixgbe_adapter *adapter, struct sk_buff *skb)
+void ixgbe_ptp_rx_rgtstamp(struct ixgbe_q_vector *q_vector,
+ struct sk_buff *skb)
{
- struct ixgbe_hw *hw = &adapter->hw;
- struct skb_shared_hwtstamps *shhwtstamps;
- u64 regval = 0, ns;
+ struct ixgbe_adapter *adapter;
+ struct ixgbe_hw *hw;
+ u64 regval = 0;
u32 tsyncrxctl;
- unsigned long flags;
+
+ /* we cannot process timestamps on a ring without a q_vector */
+ if (!q_vector || !q_vector->adapter)
+ return;
+
+ adapter = q_vector->adapter;
+ hw = &adapter->hw;
+
+ /* Read the tsyncrxctl register afterwards in order to prevent taking an
+ * I/O hit on every packet.
+ */
tsyncrxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCRXCTL);
if (!(tsyncrxctl & IXGBE_TSYNCRXCTL_VALID))
@@ -537,17 +786,7 @@ void ixgbe_ptp_rx_hwtstamp(struct ixgbe_adapter *adapter, struct sk_buff *skb)
regval |= (u64)IXGBE_READ_REG(hw, IXGBE_RXSTMPL);
regval |= (u64)IXGBE_READ_REG(hw, IXGBE_RXSTMPH) << 32;
- spin_lock_irqsave(&adapter->tmreg_lock, flags);
- ns = timecounter_cyc2time(&adapter->tc, regval);
- spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
-
- shhwtstamps = skb_hwtstamps(skb);
- shhwtstamps->hwtstamp = ns_to_ktime(ns);
-
- /* Update the last_rx_timestamp timer in order to enable watchdog check
- * for error case of latched timestamp on a dropped packet.
- */
- adapter->last_rx_timestamp = jiffies;
+ ixgbe_ptp_convert_to_hwtstamp(adapter, skb_hwtstamps(skb), regval);
}
int ixgbe_ptp_get_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr)
@@ -610,14 +849,20 @@ static int ixgbe_ptp_set_timestamp_mode(struct ixgbe_adapter *adapter,
case HWTSTAMP_FILTER_NONE:
tsync_rx_ctl = 0;
tsync_rx_mtrl = 0;
+ adapter->flags &= ~(IXGBE_FLAG_RX_HWTSTAMP_ENABLED |
+ IXGBE_FLAG_RX_HWTSTAMP_IN_REGISTER);
break;
case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L4_V1;
tsync_rx_mtrl |= IXGBE_RXMTRL_V1_SYNC_MSG;
+ adapter->flags &= ~(IXGBE_FLAG_RX_HWTSTAMP_ENABLED |
+ IXGBE_FLAG_RX_HWTSTAMP_IN_REGISTER);
break;
case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L4_V1;
tsync_rx_mtrl |= IXGBE_RXMTRL_V1_DELAY_REQ_MSG;
+ adapter->flags &= ~(IXGBE_FLAG_RX_HWTSTAMP_ENABLED |
+ IXGBE_FLAG_RX_HWTSTAMP_IN_REGISTER);
break;
case HWTSTAMP_FILTER_PTP_V2_EVENT:
case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
@@ -631,9 +876,21 @@ static int ixgbe_ptp_set_timestamp_mode(struct ixgbe_adapter *adapter,
tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_EVENT_V2;
is_l2 = true;
config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
+ adapter->flags &= ~(IXGBE_FLAG_RX_HWTSTAMP_ENABLED |
+ IXGBE_FLAG_RX_HWTSTAMP_IN_REGISTER);
break;
case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
case HWTSTAMP_FILTER_ALL:
+ /* The X550 controller is capable of timestamping all packets,
+ * which allows it to accept any filter.
+ */
+ if (hw->mac.type >= ixgbe_mac_X550) {
+ tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_ALL;
+ config->rx_filter = HWTSTAMP_FILTER_ALL;
+ adapter->flags |= IXGBE_FLAG_RX_HWTSTAMP_ENABLED;
+ break;
+ }
+ /* fall through */
default:
/*
* register RXMTRL must be set in order to do V1 packets,
@@ -641,16 +898,45 @@ static int ixgbe_ptp_set_timestamp_mode(struct ixgbe_adapter *adapter,
* Delay_Req messages and hardware does not support
* timestamping all packets => return error
*/
+ adapter->flags &= ~(IXGBE_FLAG_RX_HWTSTAMP_ENABLED |
+ IXGBE_FLAG_RX_HWTSTAMP_IN_REGISTER);
config->rx_filter = HWTSTAMP_FILTER_NONE;
return -ERANGE;
}
if (hw->mac.type == ixgbe_mac_82598EB) {
+ adapter->flags &= ~(IXGBE_FLAG_RX_HWTSTAMP_ENABLED |
+ IXGBE_FLAG_RX_HWTSTAMP_IN_REGISTER);
if (tsync_rx_ctl | tsync_tx_ctl)
return -ERANGE;
return 0;
}
+ /* Per-packet timestamping only works if the filter is set to all
+ * packets. Since this is desired, always timestamp all packets as long
+ * as any Rx filter was configured.
+ */
+ switch (hw->mac.type) {
+ case ixgbe_mac_X550:
+ case ixgbe_mac_X550EM_x:
+ /* enable timestamping all packets only if at least some
+ * packets were requested. Otherwise, play nice and disable
+ * timestamping */
+ if (config->rx_filter == HWTSTAMP_FILTER_NONE)
+ break;
+
+ tsync_rx_ctl = IXGBE_TSYNCRXCTL_ENABLED |
+ IXGBE_TSYNCRXCTL_TYPE_ALL |
+ IXGBE_TSYNCRXCTL_TSIP_UT_EN;
+ config->rx_filter = HWTSTAMP_FILTER_ALL;
+ adapter->flags |= IXGBE_FLAG_RX_HWTSTAMP_ENABLED;
+ adapter->flags &= ~IXGBE_FLAG_RX_HWTSTAMP_IN_REGISTER;
+ is_l2 = true;
+ break;
+ default:
+ break;
+ }
+
/* define ethertype filter for timestamping L2 packets */
if (is_l2)
IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_1588),
@@ -678,8 +964,8 @@ static int ixgbe_ptp_set_timestamp_mode(struct ixgbe_adapter *adapter,
IXGBE_WRITE_FLUSH(hw);
/* clear TX/RX time stamp registers, just to be sure */
- regval = IXGBE_READ_REG(hw, IXGBE_TXSTMPH);
- regval = IXGBE_READ_REG(hw, IXGBE_RXSTMPH);
+ ixgbe_ptp_clear_tx_timestamp(adapter);
+ IXGBE_READ_REG(hw, IXGBE_RXSTMPH);
return 0;
}
@@ -712,23 +998,9 @@ int ixgbe_ptp_set_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr)
-EFAULT : 0;
}
-/**
- * ixgbe_ptp_start_cyclecounter - create the cycle counter from hw
- * @adapter: pointer to the adapter structure
- *
- * This function should be called to set the proper values for the TIMINCA
- * register and tell the cyclecounter structure what the tick rate of SYSTIME
- * is. It does not directly modify SYSTIME registers or the timecounter
- * structure. It should be called whenever a new TIMINCA value is necessary,
- * such as during initialization or when the link speed changes.
- */
-void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter)
+static void ixgbe_ptp_link_speed_adjust(struct ixgbe_adapter *adapter,
+ u32 *shift, u32 *incval)
{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 incval = 0;
- u32 shift = 0;
- unsigned long flags;
-
/**
* Scale the NIC cycle counter by a large factor so that
* relatively small corrections to the frequency can be added
@@ -745,36 +1017,98 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter)
*/
switch (adapter->link_speed) {
case IXGBE_LINK_SPEED_100_FULL:
- incval = IXGBE_INCVAL_100;
- shift = IXGBE_INCVAL_SHIFT_100;
+ *shift = IXGBE_INCVAL_SHIFT_100;
+ *incval = IXGBE_INCVAL_100;
break;
case IXGBE_LINK_SPEED_1GB_FULL:
- incval = IXGBE_INCVAL_1GB;
- shift = IXGBE_INCVAL_SHIFT_1GB;
+ *shift = IXGBE_INCVAL_SHIFT_1GB;
+ *incval = IXGBE_INCVAL_1GB;
break;
case IXGBE_LINK_SPEED_10GB_FULL:
default:
- incval = IXGBE_INCVAL_10GB;
- shift = IXGBE_INCVAL_SHIFT_10GB;
+ *shift = IXGBE_INCVAL_SHIFT_10GB;
+ *incval = IXGBE_INCVAL_10GB;
break;
}
+}
- /**
- * Modify the calculated values to fit within the correct
- * number of bits specified by the hardware. The 82599 doesn't
- * have the same space as the X540, so bitshift the calculated
- * values to fit.
+/**
+ * ixgbe_ptp_start_cyclecounter - create the cycle counter from hw
+ * @adapter: pointer to the adapter structure
+ *
+ * This function should be called to set the proper values for the TIMINCA
+ * register and tell the cyclecounter structure what the tick rate of SYSTIME
+ * is. It does not directly modify SYSTIME registers or the timecounter
+ * structure. It should be called whenever a new TIMINCA value is necessary,
+ * such as during initialization or when the link speed changes.
+ */
+void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct cyclecounter cc;
+ unsigned long flags;
+ u32 incval = 0;
+ u32 tsauxc = 0;
+ u32 fuse0 = 0;
+
+ /* For some of the boards below this mask is technically incorrect.
+ * The timestamp mask overflows at approximately 61bits. However the
+ * particular hardware does not overflow on an even bitmask value.
+ * Instead, it overflows due to conversion of upper 32bits billions of
+ * cycles. Timecounters are not really intended for this purpose so
+ * they do not properly function if the overflow point isn't 2^N-1.
+ * However, the actual SYSTIME values in question take ~138 years to
+ * overflow. In practice this means they won't actually overflow. A
+ * proper fix to this problem would require modification of the
+ * timecounter delta calculations.
*/
+ cc.mask = CLOCKSOURCE_MASK(64);
+ cc.mult = 1;
+ cc.shift = 0;
+
switch (hw->mac.type) {
+ case ixgbe_mac_X550EM_x:
+ /* SYSTIME assumes X550EM_x board frequency is 300Mhz, and is
+ * designed to represent seconds and nanoseconds when this is
+ * the case. However, some revisions of hardware have a 400Mhz
+ * clock and we have to compensate for this frequency
+ * variation using corrected mult and shift values.
+ */
+ fuse0 = IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0));
+ if (!(fuse0 & IXGBE_FUSES0_300MHZ)) {
+ cc.mult = 3;
+ cc.shift = 2;
+ }
+ /* fallthrough */
+ case ixgbe_mac_X550:
+ cc.read = ixgbe_ptp_read_X550;
+
+ /* enable SYSTIME counter */
+ IXGBE_WRITE_REG(hw, IXGBE_SYSTIMR, 0);
+ IXGBE_WRITE_REG(hw, IXGBE_SYSTIML, 0);
+ IXGBE_WRITE_REG(hw, IXGBE_SYSTIMH, 0);
+ tsauxc = IXGBE_READ_REG(hw, IXGBE_TSAUXC);
+ IXGBE_WRITE_REG(hw, IXGBE_TSAUXC,
+ tsauxc & ~IXGBE_TSAUXC_DISABLE_SYSTIME);
+ IXGBE_WRITE_REG(hw, IXGBE_TSIM, IXGBE_TSIM_TXTS);
+ IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_TIMESYNC);
+
+ IXGBE_WRITE_FLUSH(hw);
+ break;
case ixgbe_mac_X540:
+ cc.read = ixgbe_ptp_read_82599;
+
+ ixgbe_ptp_link_speed_adjust(adapter, &cc.shift, &incval);
IXGBE_WRITE_REG(hw, IXGBE_TIMINCA, incval);
break;
case ixgbe_mac_82599EB:
+ cc.read = ixgbe_ptp_read_82599;
+
+ ixgbe_ptp_link_speed_adjust(adapter, &cc.shift, &incval);
incval >>= IXGBE_INCVAL_SHIFT_82599;
- shift -= IXGBE_INCVAL_SHIFT_82599;
+ cc.shift -= IXGBE_INCVAL_SHIFT_82599;
IXGBE_WRITE_REG(hw, IXGBE_TIMINCA,
- (1 << IXGBE_INCPER_SHIFT_82599) |
- incval);
+ (1 << IXGBE_INCPER_SHIFT_82599) | incval);
break;
default:
/* other devices aren't supported */
@@ -787,13 +1121,7 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter)
/* need lock to prevent incorrect read while modifying cyclecounter */
spin_lock_irqsave(&adapter->tmreg_lock, flags);
-
- memset(&adapter->cc, 0, sizeof(adapter->cc));
- adapter->cc.read = ixgbe_ptp_read;
- adapter->cc.mask = CYCLECOUNTER_MASK(64);
- adapter->cc.shift = shift;
- adapter->cc.mult = 1;
-
+ memcpy(&adapter->hw_cc, &cc, sizeof(adapter->hw_cc));
spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
}
@@ -814,29 +1142,27 @@ void ixgbe_ptp_reset(struct ixgbe_adapter *adapter)
struct ixgbe_hw *hw = &adapter->hw;
unsigned long flags;
- /* set SYSTIME registers to 0 just in case */
- IXGBE_WRITE_REG(hw, IXGBE_SYSTIML, 0x00000000);
- IXGBE_WRITE_REG(hw, IXGBE_SYSTIMH, 0x00000000);
- IXGBE_WRITE_FLUSH(hw);
-
/* reset the hardware timestamping mode */
ixgbe_ptp_set_timestamp_mode(adapter, &adapter->tstamp_config);
+ /* 82598 does not support PTP */
+ if (hw->mac.type == ixgbe_mac_82598EB)
+ return;
+
ixgbe_ptp_start_cyclecounter(adapter);
spin_lock_irqsave(&adapter->tmreg_lock, flags);
-
- /* reset the ns time counter */
- timecounter_init(&adapter->tc, &adapter->cc,
+ timecounter_init(&adapter->tc, &adapter->hw_cc,
ktime_to_ns(ktime_get_real()));
-
spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
- /*
- * Now that the shift has been calculated and the systime
+ adapter->last_overflow_check = jiffies;
+
+ /* Now that the shift has been calculated and the systime
* registers reset, (re-)enable the Clock out feature
*/
- ixgbe_ptp_setup_sdp(adapter);
+ if (adapter->ptp_setup_sdp)
+ adapter->ptp_setup_sdp(adapter);
}
/**
@@ -845,11 +1171,11 @@ void ixgbe_ptp_reset(struct ixgbe_adapter *adapter)
*
* This function performs setup of the user entry point function table and
* initializes the PTP clock device, which is used to access the clock-like
- * features of the PTP core. It will be called by ixgbe_ptp_init, only if
- * there isn't already a clock device (such as after a suspend/resume cycle,
- * where the clock device wasn't destroyed).
+ * features of the PTP core. It will be called by ixgbe_ptp_init, and may
+ * reuse a previously initialized clock (such as during a suspend/resume
+ * cycle).
*/
-static int ixgbe_ptp_create_clock(struct ixgbe_adapter *adapter)
+static long ixgbe_ptp_create_clock(struct ixgbe_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
long err;
@@ -869,11 +1195,12 @@ static int ixgbe_ptp_create_clock(struct ixgbe_adapter *adapter)
adapter->ptp_caps.n_ext_ts = 0;
adapter->ptp_caps.n_per_out = 0;
adapter->ptp_caps.pps = 1;
- adapter->ptp_caps.adjfreq = ixgbe_ptp_adjfreq;
+ adapter->ptp_caps.adjfreq = ixgbe_ptp_adjfreq_82599;
adapter->ptp_caps.adjtime = ixgbe_ptp_adjtime;
adapter->ptp_caps.gettime64 = ixgbe_ptp_gettime;
adapter->ptp_caps.settime64 = ixgbe_ptp_settime;
adapter->ptp_caps.enable = ixgbe_ptp_feature_enable;
+ adapter->ptp_setup_sdp = ixgbe_ptp_setup_sdp_x540;
break;
case ixgbe_mac_82599EB:
snprintf(adapter->ptp_caps.name,
@@ -885,14 +1212,31 @@ static int ixgbe_ptp_create_clock(struct ixgbe_adapter *adapter)
adapter->ptp_caps.n_ext_ts = 0;
adapter->ptp_caps.n_per_out = 0;
adapter->ptp_caps.pps = 0;
- adapter->ptp_caps.adjfreq = ixgbe_ptp_adjfreq;
+ adapter->ptp_caps.adjfreq = ixgbe_ptp_adjfreq_82599;
adapter->ptp_caps.adjtime = ixgbe_ptp_adjtime;
adapter->ptp_caps.gettime64 = ixgbe_ptp_gettime;
adapter->ptp_caps.settime64 = ixgbe_ptp_settime;
adapter->ptp_caps.enable = ixgbe_ptp_feature_enable;
break;
+ case ixgbe_mac_X550:
+ case ixgbe_mac_X550EM_x:
+ snprintf(adapter->ptp_caps.name, 16, "%s", netdev->name);
+ adapter->ptp_caps.owner = THIS_MODULE;
+ adapter->ptp_caps.max_adj = 30000000;
+ adapter->ptp_caps.n_alarm = 0;
+ adapter->ptp_caps.n_ext_ts = 0;
+ adapter->ptp_caps.n_per_out = 0;
+ adapter->ptp_caps.pps = 0;
+ adapter->ptp_caps.adjfreq = ixgbe_ptp_adjfreq_X550;
+ adapter->ptp_caps.adjtime = ixgbe_ptp_adjtime_timecounter;
+ adapter->ptp_caps.gettime64 = ixgbe_ptp_gettime64_timecounter;
+ adapter->ptp_caps.settime64 = ixgbe_ptp_settime64_timecounter;
+ adapter->ptp_caps.enable = ixgbe_ptp_feature_enable;
+ adapter->ptp_setup_sdp = NULL;
+ break;
default:
adapter->ptp_clock = NULL;
+ adapter->ptp_setup_sdp = NULL;
return -EOPNOTSUPP;
}
@@ -961,18 +1305,13 @@ void ixgbe_ptp_suspend(struct ixgbe_adapter *adapter)
if (!test_and_clear_bit(__IXGBE_PTP_RUNNING, &adapter->state))
return;
- /* since this might be called in suspend, we don't clear the state,
- * but simply reset the auxiliary PPS signal control register
- */
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_TSAUXC, 0x0);
+ adapter->flags2 &= ~IXGBE_FLAG2_PTP_PPS_ENABLED;
+ if (adapter->ptp_setup_sdp)
+ adapter->ptp_setup_sdp(adapter);
/* ensure that we cancel any pending PTP Tx work item in progress */
cancel_work_sync(&adapter->ptp_tx_work);
- if (adapter->ptp_tx_skb) {
- dev_kfree_skb_any(adapter->ptp_tx_skb);
- adapter->ptp_tx_skb = NULL;
- clear_bit_unlock(__IXGBE_PTP_TX_IN_PROGRESS, &adapter->state);
- }
+ ixgbe_ptp_clear_tx_timestamp(adapter);
}
/**
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 995f03107eac..3c337a4c5167 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -1020,6 +1020,7 @@ struct ixgbe_thermal_sensor_data {
#define IXGBE_TXSTMPH 0x08C08 /* Tx timestamp value High - RO */
#define IXGBE_SYSTIML 0x08C0C /* System time register Low - RO */
#define IXGBE_SYSTIMH 0x08C10 /* System time register High - RO */
+#define IXGBE_SYSTIMR 0x08C58 /* System time register Residue - RO */
#define IXGBE_TIMINCA 0x08C14 /* Increment attributes register - RW */
#define IXGBE_TIMADJL 0x08C18 /* Time Adjustment Offset register Low - RW */
#define IXGBE_TIMADJH 0x08C1C /* Time Adjustment Offset register High - RW */
More information about the Intel-wired-lan
mailing list