[Intel-wired-lan] [next PATCH S22 08/14] i40e: Opcode and structures required by OEM Post Update AQ command and add new NVM arq message

Deepthi Kavalur deepthi.kavalur at intel.com
Fri Nov 13 23:47:08 UTC 2015


From: Michal Kosiarz <michal.kosiarz at intel.com>

This is a part of implementation which contains data structures and
opcode for new AQ command. There's a new ARQ message that gets sent
near the end of the NVM update process that the driver should recognize
and ignore, rather than printing an Unknown Event error.

Signed-off-by: Michal Kosiarz <michal.kosiarz at intel.com>
Acked-by: Shannon Nelson <shannon.nelson at intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher at intel.com>
Change-ID: I04830a5bcae14823e16b9424cc4165e169336c1f

Signed-off-by: Shannon Nelson <shannon.nelson at intel.com>
Change-ID: Ic73b0a4e10e0b6895d1f2435125f1e789f3756dd
---
Testing Hints :
	Do an nvmupdate with the current version of nvmupdate tool before and
	after this patch is applied and watch the kernel log for the message
		"ARQ Error: Unknown event 0x0720 received"
	Using "nvmupdate -f" will allow you to "update" your NVM with the same
	version NVM, over and over; useful for this kind of testing.

 drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h   | 21 +++++++++++++++++++++
 drivers/net/ethernet/intel/i40e/i40e_main.c         |  1 +
 drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h | 21 +++++++++++++++++++++
 3 files changed, 43 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
index 61a4979..b22012a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
@@ -227,6 +227,7 @@ enum i40e_admin_queue_opc {
 	i40e_aqc_opc_nvm_update			= 0x0703,
 	i40e_aqc_opc_nvm_config_read		= 0x0704,
 	i40e_aqc_opc_nvm_config_write		= 0x0705,
+	i40e_aqc_opc_oem_post_update		= 0x0720,
 
 	/* virtualization commands */
 	i40e_aqc_opc_send_msg_to_pf		= 0x0801,
@@ -1891,6 +1892,26 @@ struct i40e_aqc_nvm_config_data_immediate_field {
 
 I40E_CHECK_STRUCT_LEN(0xc, i40e_aqc_nvm_config_data_immediate_field);
 
+/* OEM Post Update (indirect 0x0720)
+ * no command data struct used
+ */
+struct i40e_aqc_nvm_oem_post_update {
+#define I40E_AQ_NVM_OEM_POST_UPDATE_EXTERNAL_DATA	0x01
+	u8 sel_data;
+	u8 reserved[7];
+};
+
+I40E_CHECK_STRUCT_LEN(0x8, i40e_aqc_nvm_oem_post_update);
+
+struct i40e_aqc_nvm_oem_post_update_buffer {
+	u8 str_len;
+	u8 dev_addr;
+	__le16 eeprom_addr;
+	u8 data[36];
+};
+
+I40E_CHECK_STRUCT_LEN(0x28, i40e_aqc_nvm_oem_post_update_buffer);
+
 /* Send to PF command (indirect 0x0801) id is only used by PF
  * Send to VF command (indirect 0x0802) id is only used by PF
  * Send to Peer PF command (indirect 0x0803)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 3f91e8f..bef08f1 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -6295,6 +6295,7 @@ static void i40e_clean_adminq_subtask(struct i40e_pf *pf)
 			break;
 		case i40e_aqc_opc_nvm_erase:
 		case i40e_aqc_opc_nvm_update:
+		case i40e_aqc_opc_oem_post_update:
 			i40e_debug(&pf->hw, I40E_DEBUG_NVM, "ARQ NVM operation completed\n");
 			break;
 		default:
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h
index 1c76389..f5b2b36 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h
@@ -227,6 +227,7 @@ enum i40e_admin_queue_opc {
 	i40e_aqc_opc_nvm_update			= 0x0703,
 	i40e_aqc_opc_nvm_config_read		= 0x0704,
 	i40e_aqc_opc_nvm_config_write		= 0x0705,
+	i40e_aqc_opc_oem_post_update		= 0x0720,
 
 	/* virtualization commands */
 	i40e_aqc_opc_send_msg_to_pf		= 0x0801,
@@ -1888,6 +1889,26 @@ struct i40e_aqc_nvm_config_data_immediate_field {
 
 I40E_CHECK_STRUCT_LEN(0xc, i40e_aqc_nvm_config_data_immediate_field);
 
+/* OEM Post Update (indirect 0x0720)
+ * no command data struct used
+ */
+ struct i40e_aqc_nvm_oem_post_update {
+#define I40E_AQ_NVM_OEM_POST_UPDATE_EXTERNAL_DATA	0x01
+	u8 sel_data;
+	u8 reserved[7];
+};
+
+I40E_CHECK_STRUCT_LEN(0x8, i40e_aqc_nvm_oem_post_update);
+
+struct i40e_aqc_nvm_oem_post_update_buffer {
+	u8 str_len;
+	u8 dev_addr;
+	__le16 eeprom_addr;
+	u8 data[36];
+};
+
+I40E_CHECK_STRUCT_LEN(0x28, i40e_aqc_nvm_oem_post_update_buffer);
+
 /* Send to PF command (indirect 0x0801) id is only used by PF
  * Send to VF command (indirect 0x0802) id is only used by PF
  * Send to Peer PF command (indirect 0x0803)
-- 
2.1.0



More information about the Intel-wired-lan mailing list