[Intel-wired-lan] [PATCH 2/2] ixgbe: restrict synchronization of link_up and speed

zhuyj zyjzyj2000 at gmail.com
Wed Dec 30 08:20:22 UTC 2015


On 12/30/2015 02:55 PM, Tantilov, Emil S wrote:
>> -----Original Message-----
>> From: zhuyj [mailto:zyjzyj2000 at gmail.com]
>> Sent: Tuesday, December 29, 2015 6:49 PM
>> To: Tantilov, Emil S; Kirsher, Jeffrey T; Brandeburg, Jesse; Nelson,
>> Shannon; Wyborny, Carolyn; Skidmore, Donald C; Allan, Bruce W; Ronciak,
>> John; Williams, Mitch A; intel-wired-lan at lists.osuosl.org;
>> netdev at vger.kernel.org; e1000-devel at lists.sourceforge.net
>> Cc: Viswanathan, Ven (Wind River); Shteinbock, Boris (Wind River); Bourg,
>> Vincent (Wind River)
>> Subject: Re: [Intel-wired-lan] [PATCH 2/2] ixgbe: restrict synchronization
>> of link_up and speed
>>
>> On 12/30/2015 12:18 AM, Tantilov, Emil S wrote:
>>>> -----Original Message-----
>>>> From: Intel-wired-lan [mailto:intel-wired-lan-bounces at lists.osuosl.org]
>> On
>>>> Behalf Of zyjzyj2000 at gmail.com
>>>> Sent: Monday, December 28, 2015 6:32 PM
>>>> To: Kirsher, Jeffrey T; Brandeburg, Jesse; Nelson, Shannon; Wyborny,
>>>> Carolyn; Skidmore, Donald C; Allan, Bruce W; Ronciak, John; Williams,
>> Mitch
>>>> A; intel-wired-lan at lists.osuosl.org; netdev at vger.kernel.org; e1000-
>>>> devel at lists.sourceforge.net
>>>> Cc: Viswanathan, Ven (Wind River); Shteinbock, Boris (Wind River);
>> Bourg,
>>>> Vincent (Wind River)
>>>> Subject: [Intel-wired-lan] [PATCH 2/2] ixgbe: restrict synchronization
>> of
>>>> link_up and speed
>>>>
>>>> From: Zhu Yanjun <yanjun.zhu at windriver.com>
>>>>
>>>> When the X540 NIC acts as a slave of some virtual NICs, it is very
>>>> important to synchronize link_up and link_speed, such as a bonding
>>>> driver in 802.3ad mode. When X540 NIC acts as an independent interface,
>>>> it is not necessary to synchronize link_up and link_speed. That is,
>>>> the time span between link_up and link_speed is acceptable.
>>> What exactly do you mean by "time span between link_up and link_speed"?
>> In the previous mail, I show you some ethtool logs. In these logs, there
>> is some
>> time with NIC up while speed is unknown. I think this "some time" is
>> time span between
>> link_up and link_speed. Please see the previous mail for details.
> Was this when reporting the link state from check_link() (reading the LINKS
> register) or reporting the adapter->link_speed?
>
>>> Where is it you think the de-synchronization occurs?
>> When a NIC interface acts as a slave, a flag "IFF_SLAVE" is set in
>> netdevice struct.
>> Before we enter this function, we check IFF_SLAVE flag. If this flag is
>> set, we continue to check
>> link_speed. If not, this function is executed whether this link_speed is
>> unknown or not.
> I can already see this in your patch. I was asking about the reason why your
> change is needed.

an extreme example, let us assume this scenario:

An ixgbe NIC directly connects to another NIC (let us call it NIC-a). 
And auto-negotiate is off while no static speed is set in the 2 NICs. 
These 2 NICs acts as 2 independent interfaces. As such, at this time, 
there is no speed in the both 2 NICs. That is, link_speed is unknown.

When the user run "ifconfig or ethtool", NIC-a will show "Link detected: 
yes" while ixgbe NIC will show "Link detected: no" if the flag IFF_SLAVE 
is not set.

NIC-a stands for most NIC, such as e1000, e1000e and so on.

Best Regards!
Zhu Yanjun
>
>>>> Signed-off-by: Zhu Yanjun <yanjun.zhu at windriver.com>
>>>> ---
>>>> drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |    9 ++++++++-
>>>> 1 file changed, 8 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
>>>> b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
>>>> index ace21b9..1bb6056 100644
>>>> --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
>>>> +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
>>>> @@ -6436,8 +6436,15 @@ static void ixgbe_watchdog_link_is_up(struct
>>>> ixgbe_adapter *adapter)
>>>> 	 * time. To X540 NIC, there is a time span between link_up and
>>>> 	 * link_speed. As such, only continue if link_up and link_speed are
>>>> 	 * ready to X540 NIC.
>>>> +	 * The time span between link_up and link_speed is very important
>>>> +	 * when the X540 NIC acts as a slave in some virtual NICs, such as
>>>> +	 * a bonding driver in 802.3ad mode. When X540 NIC acts as an
>>>> +	 * independent interface, it is not necessary to synchronize link_up
>>>> +	 * and link_speed.
>>>> +	 * In the end, not continue if (X540 NIC && SLAVE && link_speed
>>>> UNKNOWN)
>>> This is a patch on top of your previous patch which I don't think was
>> applied,
>>> so this is not going to apply cleanly.
>>>
>>>> 	 */
>>>> -	if (hw->mac.type == ixgbe_mac_X540)
>>>> +	if ((hw->mac.type == ixgbe_mac_X540) &&
>>>> +	    (netdev->flags & IFF_SLAVE))
>>>> 		if (link_speed == IXGBE_LINK_SPEED_UNKNOWN)
>>>> 			return;
>>> If you were to enter ixgbe_watchdog_link_is_up() with unknown speed, then
>> I would
>>> assume that you also have a dmesg that shows:
>>> "NIC Link is Up unknown speed"
>>>
>>> by the interface you use in the bond?
>> Sure. There is a dmesg log from the customer.
>> "
>> ...
>> 2015-10-05T06:14:34.350 controller-0 kernel: info bonding: bond0: link
>> status definitely up for interface eth0, 0 Mbps full duplex.
> This message is from the bonding driver not from ixgbe.
>
> In your patch you are adding a check for unknown link to ixgbe_watchdog_link_is_up()
> if that condition was true then you should also see "unknown link" being reported by ixgbe.
>
> Thanks,
> Emil
>



More information about the Intel-wired-lan mailing list