[Intel-wired-lan] [PATCH 4/6] fm10k: print error message when stop_hw fails

[Jacob Keller]

fm10k_stop_hw_generic calls fm10k_disable_queues_generic, which may
return an error code indicating that the queues were not stopped within
the time limit. Notify the user by displaying a message in the kernel
message ring, in a similar way to how we notify the user when reset_hw
fails. There isn't much we can do to recover from this error, so
currently nothing else is done.

Signed-off-by: Jacob Keller <jacob.e.keller at intel.com>
---
 drivers/net/ethernet/intel/fm10k/fm10k_pci.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
index ed1f8cf39508..3c7c819ac8d9 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
@@ -1656,6 +1656,7 @@ void fm10k_down(struct fm10k_intfc *interface)
 {
 	struct net_device *netdev = interface->netdev;
 	struct fm10k_hw *hw = &interface->hw;
+	int err;
 
 	/* signal that we are down to the interrupt handler and service task */
 	set_bit(__FM10K_DOWN, &interface->state);
@@ -1680,7 +1681,9 @@ void fm10k_down(struct fm10k_intfc *interface)
 	fm10k_update_stats(interface);
 
 	/* Disable DMA engine for Tx/Rx */
-	hw->mac.ops.stop_hw(hw);
+	err = hw->mac.ops.stop_hw(hw);
+	if (err)
+		dev_err(&interface->pdev->dev, "stop_hw failed: %d\n", err);
 
 	/* free any buffers still on the rings */
 	fm10k_clean_all_tx_rings(interface);
-- 
2.7.0.236.gda096a0.dirty