[Intel-wired-lan] [next] igb: allow setting MAC address on i211 using a device tree blob
John Holland
jotihojr at gmail.com
Wed Feb 10 08:52:46 UTC 2016
> On Feb 9, 2016, at 12:02, Jeff Kirsher <jeffrey.t.kirsher at intel.com> wrote:
>
>> On Fri, 2016-01-29 at 23:11 +0100, John Holland wrote:
>> The Intel i211 LOM pcie ethernet controllers' iNVM operates as an
>> OTP
>> and has no externel EEPROM interface [1]. The following allows the
>> driver to pickup the MAC address from a device tree blob when
>> CONFIG_OF
>> has been enabled.
>>
>> [1]
>> http://www.intel.com/content/www/us/en/embedded/products/networking/i
>> 211-ethernet-controller-datasheet.html
>>
>> Signed-off-by: John Holland <jotihojr at gmail.com>
>> ---
>> drivers/net/ethernet/intel/igb/igb_main.c | 30
>> ++++++++++++++++++++++++++++++
>> 1 file changed, 30 insertions(+)
>>
>> diff --git a/drivers/net/ethernet/intel/igb/igb_main.c
>> b/drivers/net/ethernet/intel/igb/igb_main.c
>> index 31e5f39..9c92443 100644
>> --- a/drivers/net/ethernet/intel/igb/igb_main.c
>> +++ b/drivers/net/ethernet/intel/igb/igb_main.c
>> @@ -56,6 +56,11 @@
>> #include <linux/i2c.h>
>> #include "igb.h"
>>
>> +#ifdef defined(CONFIG_OF)
>> +#include <linux/of_net.h>
>> +#include <linux/etherdevice.h>
>> +#endif
>> +
>> #define MAJ 5
>> #define MIN 3
>> #define BUILD 0
>> @@ -2217,6 +2222,26 @@ static s32 igb_init_i2c(struct igb_adapter
>> *adapter)
>> }
>>
>> /**
>> + * igb_read_mac_addr_dts - Read mac addres from the device tree
>> blob.
>
> Address is mis-spelled above
Correct. Will fix this.
>
>> + * @hw: pointer to the e1000 hardware structure
>> + **/
>> +#ifdef defined(CONFIG_OF)
>
> Minor nitpick, you should have the function comment header wrapped in
> the #ifdef as well.
No problem...
I'll do that right too.
>
>> +static void igb_read_mac_addr_dts(struct e1000_hw *hw)
>> +{
>> + const u8 *mac;
>> + struct device_node *dn;
>> +
>> + dn = of_find_compatible_node(NULL, NULL, "intel,i211");
>> + if (!dn)
>> + return;
>> +
>> + mac = of_get_mac_address(dn);
>> + if (mac)
>> + ether_addr_copy(hw->mac.addr, mac);
>> +}
>> +#endif
>> +
>> +/**
>> * igb_probe - Device Initialization Routine
>> * @pdev: PCI device information struct
>> * @ent: entry in igb_pci_tbl
>> @@ -2420,6 +2445,11 @@ static int igb_probe(struct pci_dev *pdev,
>> const
>> struct pci_device_id *ent)
>> if (hw->mac.ops.read_mac_addr(hw))
>> dev_err(&pdev->dev, "NVM Read Error\n");
>>
>> +#ifdef defined(CONFIG_OF)
>> + if (!is_valid_ether_addr(hw->mac.addr))
>> + igb_read_mac_addr_dts(hw);
>> +#endif
>> +
>> memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len);
>>
>> if (!is_valid_ether_addr(netdev->dev_addr)) {
>> _______________________________________________
>> Intel-wired-lan mailing list
>> Intel-wired-lan at lists.osuosl.org
>> http://lists.osuosl.org/mailman/listinfo/intel-wired-lan
More information about the Intel-wired-lan
mailing list