[Intel-wired-lan] [next PATCH S31 v4 06/12] i40evf: Add longer wait after remove module

[Avinash Dayanand]

From: Mitch Williams <mitch.a.williams at intel.com>

Upon module remove, wait a little longer after requesting a reset before
checking to see if the firmware responded. This change prevents double
resets when the firmware is busy.

Testing Hints: Load and unload VF driver repeatedly
with a lot of VFs enabled and make sure it reinitializes properly each
time.

Signed-off-by: Mitch Williams <mitch.a.williams at intel.com>
Change-ID: Ieedc988ee82fac1f32a074bf4d9e4dba426bfa58
---
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 0c99974..8598c5f 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -2854,11 +2854,11 @@ static void i40evf_remove(struct pci_dev *pdev)
 	adapter->state = __I40EVF_REMOVE;
 	adapter->aq_required = 0;
 	i40evf_request_reset(adapter);
-	msleep(20);
+	msleep(50);
 	/* If the FW isn't responding, kick it once, but only once. */
 	if (!i40evf_asq_done(hw)) {
 		i40evf_request_reset(adapter);
-		msleep(20);
+		msleep(50);
 	}
 
 	if (adapter->msix_entries) {
-- 
2.4.3