[Intel-wired-lan] [next PATCH S37 10/15] i40e: Removing unnecessary code which caused supported link mode bug

[Bimmy Pujari]

From: Avinash Dayanand <avinash.dayanand at intel.com>

Removing this code which wasn't allowing 100BaseT to show up in the supported
link modes for 10GBaseT PHYs.

Signed-off-by: Avinash Dayanand <avinash.dayanand at intel.com>
Change-ID: Iada2eafa7ef6b4bac9a2a1380ff533ae5de51e1d
---
Testing Hints: Use 'ethtool ethx' check if 100BaseT is listed as one of
the supported link modes.

 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 0e80b35..0a96c5a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -313,8 +313,7 @@ static void i40e_phy_type_to_ethtool(struct i40e_pf *pf, u32 *supported,
 		*advertising |= ADVERTISED_Autoneg |
 			       ADVERTISED_40000baseCR4_Full;
 	}
-	if ((phy_types & I40E_CAP_PHY_TYPE_100BASE_TX) &&
-	    !(phy_types & I40E_CAP_PHY_TYPE_1000BASE_T)) {
+	if (phy_types & I40E_CAP_PHY_TYPE_100BASE_TX) {
 		*supported |= SUPPORTED_Autoneg |
 			     SUPPORTED_100baseT_Full;
 		*advertising |= ADVERTISED_Autoneg |
-- 
2.4.11