[Intel-wired-lan] [PATCH next-queue] ixgbe: netdev->vlan_features shouldn't have the vlan related flag

[Xin Long]

On Wed, May 18, 2016 at 11:07 PM, Alexander Duyck
<alexander.duyck at gmail.com> wrote:
> On Wed, May 18, 2016 at 1:55 AM, Xin Long <lucien.xin at gmail.com> wrote:
>> vlan_features is used to set the vlan_dev->features when we create
>> a vlan device. it shouldn't have the vlan related flag, like
>> NETIF_F_HW_VLAN_CTAG_FILTER, which will cause vlan_dev create fail.
>> the call trace is as follow:
>>
>> [ 5604.264429] Call Trace:
>> [ 5604.278980]  [<ffffffff8133ef0f>] dump_stack+0x63/0x84
>> [ 5604.341499]  [<ffffffff810883c1>] __warn+0xd1/0xf0
>> [ 5604.382004]  [<ffffffff8108843f>] warn_slowpath_fmt+0x5f/0x80
>> [ 5604.454602]  [<ffffffff81354359>] ? find_next_bit+0x19/0x20
>> [ 5604.541940]  [<ffffffff815a93d2>] register_netdevice+0x3c2/0x490
>> [ 5604.631744]  [<ffffffffa048bb43>] register_vlan_dev+0x133/0x290 [8021q]
>> [ 5604.710346]  [<ffffffffa048d44c>] vlan_newlink+0xbc/0xf0 [8021q]
>> [ 5604.789945]  [<ffffffff815b8e22>] rtnl_newlink+0x6c2/0x880
>> [ 5604.854000]  [<ffffffff8136ab93>] ? nla_parse+0xa3/0x100
>> [ 5604.889974]  [<ffffffff815b88bc>] ? rtnl_newlink+0x15c/0x880
>> [ 5604.951987]  [<ffffffff815b61b4>] rtnetlink_rcv_msg+0xa4/0x240
>> [ 5605.017614]  [<ffffffff812c4390>] ? sock_has_perm+0x70/0x90
>> [ 5605.083120]  [<ffffffff81590b8d>] ? __alloc_skb+0x8d/0x2b0
>> [ 5605.147939]  [<ffffffff815b6110>] ? rtnetlink_rcv+0x30/0x30
>> [ 5605.194973]  [<ffffffff815d9d77>] netlink_rcv_skb+0xa7/0xc0
>> [ 5605.246380]  [<ffffffff815b6108>] rtnetlink_rcv+0x28/0x30
>> [ 5605.308998]  [<ffffffff815d9728>] netlink_unicast+0x178/0x240
>> [ 5605.375020]  [<ffffffff815d9b1e>] netlink_sendmsg+0x32e/0x3b0
>> [ 5605.463066]  [<ffffffff81587b68>] sock_sendmsg+0x38/0x50
>> [ 5605.523910]  [<ffffffff815884b9>] ___sys_sendmsg+0x279/0x290
>> [ 5605.574178]  [<ffffffff8118d172>] ? filemap_map_pages+0x252/0x2d0
>> [ 5605.675281]  [<ffffffff81206005>] ? mem_cgroup_commit_charge+0x85/0x100
>> [ 5605.748882]  [<ffffffff81588ec4>] __sys_sendmsg+0x54/0x90
>> [ 5605.811931]  [<ffffffff81588f12>] SyS_sendmsg+0x12/0x20
>> [ 5605.873955]  [<ffffffff81003b12>] do_syscall_64+0x62/0x110
>> [ 5605.931006]  [<ffffffff816b62a1>] entry_SYSCALL64_slow_path+0x25/0x25
>> [ 5606.012017] ---[ end trace 11d7fa6a696c0c02 ]---
>>
>> it's from register_netdevice:
>>
>>         if (((dev->hw_features | dev->features) &
>>              NETIF_F_HW_VLAN_CTAG_FILTER) &&
>>             (!dev->netdev_ops->ndo_vlan_rx_add_vid ||
>>              !dev->netdev_ops->ndo_vlan_rx_kill_vid)) {
>>                 netdev_WARN(dev, "Buggy VLAN acceleration in driver!\n");
>>                 ret = -EINVAL;
>>                 goto err_uninit;
>>         }
>>
>> the reason is vlan dev's features has NETIF_F_HW_VLAN_CTAG_FILTER flag,
>> but no ndo_vlan_rx_add_vid nor ndo_vlan_rx_kill_vid.
>>
>> we will fix it by put setting netdev->features' vlan related flags behind
>> using features to set netdev->vlan_features.
>>
>> Signed-off-by: Xin Long <lucien.xin at gmail.com>
>
> There is already a fix for this in Dave Miller's net-next tree.  Take
> a look at commit 5eee87cd51df "ixgbe: Fix VLAN features error".
Ah, yes, just saw it, same patch. ;)
Thanks, Alex

>
> Thanks.
>
> - Alex