[Intel-wired-lan] [RFC PATCH 00/30] Kernel NET policy
Liang, Kan
kan.liang at intel.com
Mon Jul 18 19:45:15 UTC 2016
> On Sun, Jul 17, 2016 at 11:55 PM, <kan.liang at intel.com> wrote:
> > From: Kan Liang <kan.liang at intel.com>
> >
> > It is a big challenge to get good network performance. First, the
> > network performance is not good with default system settings. Second,
> > it is too difficult to do automatic tuning for all possible workloads,
> > since workloads have different requirements. Some workloads may want
> > high throughput. Some may need low latency. Last but not least, there are
> lots of manual configurations.
> > Fine grained configuration is too difficult for users.
>
> The problem as I see it is that this is just going to end up likely being an even
> more intrusive version of irqbalance. I really don't like the way that turned
> out as it did a number of really dumb things that usually result in it being
> disabled as soon as you actually want to do anything that will actually involve
> any kind of performance tuning. If this stuff is pushed into the kernel it will
> be even harder to get rid of and that is definitely a bad thing.
>
> > NET policy intends to simplify the network configuration and get a
> > good network performance according to the hints(policy) which is
> > applied by user. It provides some typical "policies" for user which
> > can be set per-socket, per-task or per-device. The kernel will
> > automatically figures out how to merge different requests to get good
> network performance.
>
> So where is your policy for power saving? From past experience I can tell you
There is no policy for power saving yet. I will add it to my todo list.
> that while performance tuning is a good thing, doing so at the expense of
> power management is bad. In addition you seem to be making a lot of
> assumptions here that the end users are going to rewrite their applications to
> use the new socket options you added in order to try and tune the
Currently, they can set per task policy by proc to get good performance without
code changes.
> performance. I have a hard time believing most developers are going to go
> to all that trouble. In addition I suspect that even if they do go to that
> trouble they will probably still screw it up and you will end up with
> applications advertising latency as a goal when they should have specified
> CPU and so on.
>
> > Net policy is designed for multiqueue network devices. This
> > implementation is only for Intel NICs using i40e driver. But the
> > concepts and generic code should apply to other multiqueue NICs too.
>
> I would argue that your code is not very generic. The fact that it is relying on
> flow director already greatly limits what you can do. If you want to make this
> truly generic I would say you need to find ways to make this work on
> everything all the way down to things like i40evf and igb which don't have
> support for Flow Director.
Actually the NET policy codes employ ethtool's interface set_rxnfc to set rules.
It should be generic.
I guess I emphasize Flow Director too much in the document which make
you confuse.
>
> > Net policy is also a combination of generic policy manager code and
> > some ethtool callbacks (per queue coalesce setting, flow
> > classification rules) to configure the driver.
> > This series also supports CPU hotplug and device hotplug.
> >
> > Here are some key Interfaces/APIs for NET policy.
> >
> > /proc/net/netpolicy/$DEV/policy
> > User can set/get per device policy from /proc
> >
> > /proc/$PID/net_policy
> > User can set/get per task policy from /proc
> > prctl(PR_SET_NETPOLICY, POLICY_NAME, NULL, NULL, NULL)
> > An alternative way to set/get per task policy is from prctl.
> >
> > setsockopt(sockfd,SOL_SOCKET,SO_NETPOLICY,&policy,sizeof(int))
> > User can set/get per socket policy by setsockopt
> >
> >
> > int (*ndo_netpolicy_init)(struct net_device *dev,
> > struct netpolicy_info *info);
> > Initialize device driver for NET policy
> >
> > int (*ndo_get_irq_info)(struct net_device *dev,
> > struct netpolicy_dev_info *info);
> > Collect device irq information
>
> Instead of making the irq info a part of the ndo ops it might make more
> sense to make it part of an ethtool op. Maybe you could make it so that you
> could specify a single queue at a time and get things like statistics, IRQ, and
> ring information.
I will think about it. Thanks.
>
> > int (*ndo_set_net_policy)(struct net_device *dev,
> > enum netpolicy_name name);
> > Configure device according to policy name
>
> I really don't like this piece of it. I really think we shouldn't be leaving so
> much up to the driver to determine how to handle things.
There are some settings are device specific. For example, the interrupt
moderation for i40e for BULK policy is (50, 125). For other device, the number
could be different. For other device, only tunning interrupt moderation may
not be enough. So we need an interface for driver specific setting.
> In addition just passing one of 4 different types doesn't do much for actual
> configuration because the actual configuration of the device is much more
> complex then that. Essentially all this does is provide a benchmark tuning
> interface.
The actual configuration is too complex for the user.
The different types at least provide them a good performance and
a good baseline to start.
>
> > netpolicy_register(struct netpolicy_reg *reg);
> > netpolicy_unregister(struct netpolicy_reg *reg);
> > NET policy API to register/unregister per task/socket net policy.
> > For each task/socket, an record will be created and inserted into an RCU
> > hash table.
>
> This piece will take a significant amount of time before it could ever catch on.
> Once again this just looks like a benchmark tuning interface. It isn't of much
> value.
>
> > netpolicy_pick_queue(struct netpolicy_reg *reg, bool is_rx);
> > NET policy API to find the proper queue for packet receiving and
> > transmitting.
> >
> > netpolicy_set_rules(struct netpolicy_reg *reg, u32 queue_index,
> > struct netpolicy_flow_spec *flow);
> > NET policy API to add flow director rules.
>
> So Flow Director is a very Intel-centric approach. I would suggest taking a
> now at NTUPLE and RXNFC rules as that is what is actually implemented in
> the kernel. In addition I would recommend exploring RPS and
> ndo_rx_flow_steer as those are existing interfaces for configuring a specific
> flow to be delivered to a specific CPU.
Current codes use set_rxnfc.
Sorry for the confusion for Flow Director.
>
> > For using NET policy, the per-device policy must be set in advance. It
> > will automatically configure the system and re-organize the resource
> > of the system accordingly. For system configuration, in this series,
> > it will disable irq balance, set device queue irq affinity, and modify
> > interrupt moderation. For re-organizing the resource, current
> > implementation forces that CPU and queue irq are 1:1 mapping. An 1:1
> mapping group is also called net policy object.
> > For each device policy, it maintains a policy list. Once the device
> > policy is applied, the objects will be insert and tracked in that
> > device policy list. The policy list only be updated when cpu/device
> > hotplug, queue number changes or device policy changes.
>
> So as a beginning step it might make more sense to try and fix irqbalance
> instead of disabling it. That is a huge red flag for me.
> You are just implementing something that is more intrusive than irqbalance
> and my concern here is we can't just disable it and reconfigure things like we
> can with the current irqbalance. If irqbalance never got it right then why
> should we trust this?
>
> Also how will you code handle a non 1:1 mapping. For example I know one
> thing I have been looking at trying out was implementing a setup that would
> allocate 1 Tx queue per logical CPU, and 1 Rx queue per physical CPU. The
> reason for that being that from past experience on ixgbe I have found that
> more Rx queues does not equal more performance when you start stacking
> active queues on SMT pairs. If you don't have enough queues for the
> number of CPUs in a case such as this how would your code handle it?
The basic schedule unit for NET policy is object. Currently, one object includes
1 CPU and 1 queue. CPU and queue are 1:1 mapping.
For your case, we can define object as 2 TX queue, 1 Rx queue and 2 logical CPU
in the same physical core.
The object generation code is not hard to change.
>
> > The user can use /proc, prctl and setsockopt to set per-task and
> > per-socket net policy. Once the policy is set, an related record will
> > be inserted into RCU hash table. The record includes ptr, policy and
> > net policy object. The ptr is the pointer address of task/socket. The
> > object will not be assigned until the first package receive/transmit.
> > The object is picked by round-robin from object list. Once the object
> > is determined, the following packets will be set to redirect to the
> queue(object).
> > The object can be shared. The per-task or per-socket policy can be
> inherited.
> >
> > Now NET policy supports four per device policies and three per
> > task/socket policies.
> > - BULK policy: This policy is designed for high throughput. It can be
> > applied to either per device policy or per task/socket policy.
> > - CPU policy: This policy is designed for high throughput but lower CPU
> > utilization. It can be applied to either per device policy or
> > per task/socket policy.
> > - LATENCY policy: This policy is designed for low latency. It can be
> > applied to either per device policy or per task/socket policy.
> > - MIX policy: This policy can only be applied to per device policy. This
> > is designed for the case which miscellaneous types of workload running
> > on the device.
>
> This is a rather sparse list of policies. I know most organizations with large
> data centers care about power savings AND latency. What you have here is a
> rather simplistic set of targets. I think actual configuration is much more
> complex then that.
There will be more policies are added in the future.
>
> > Lots of tests are done for net policy on platforms with Intel Xeon E5
> > V2 and XL710 40G NIC. The baseline test is with Linux 4.6.0 kernel.
>
> So I assume you are saying you applied your patches on top of a 4.6.0 kernel
> then for testing correct? I'm just wanting to verify we aren't looking 4.6.0
> versus the current net-next or Linus's 4.7-RCX tree.
Yes, the patches on top of 4.6.0 kernel.
>
> > Netperf is used to evaluate the throughput and latency performance.
> > - "netperf -f m -t TCP_RR -H server_IP -c -C -l 60 -- -r buffersize
> > -b burst -D" is used to evaluate throughput performance, which is
> > called throughput-first workload.
>
> While this is okay for testing performance you might be better off using a
> TCP_STREAM, TCP_MAERTS, and perhaps UDP_STREAM test. There aren't
> too many real-world applications that will give you the kind of traffic pattern
> you see with TCP_RR being used for a bulk throughput test.
>
> > - "netperf -t TCP_RR -H server_IP -c -C -l 60 -- -r buffersize" is
> > used to evaluate latency performance, which is called latency-first
> > workload.
> > - Different loads are also evaluated by running 1, 12, 24, 48 or 96
> > throughput-first workloads/latency-first workload simultaneously.
> >
> > For "BULK" policy, the throughput performance is on average ~1.26X
> > than baseline.
> > For "CPU" policy, the throughput performance is on average ~1.20X than
> > baseline, and has lower CPU% (on average ~5% lower than "BULK" policy).
> > For "LATENCY" policy, the latency is on average 53.5% less than the
> baseline.
>
> I have misgivings about just throwing out random numbers with no actual
> data to back it up. What kind of throughput and CPU utilization were you
> actually seeing? The idea is that we should be able to take your patches and
> apply them on our own system to see similar values and I'm suspecting that
> in many cases you might be focusing on the wrong things. For example I
> could get good "LATENCY"
> numbers by just disabling interrupt throttling. That would look really good
> for latency, but my CPU utilization would be through the roof. It might be
> useful if you could provide throughput, CPU utilization, and latency numbers
> for your baseline versus each of these settings.
I'm not sure if I can share the absolute number. But here is a white paper which may
include the number you want.
The per-queue interrupt moderation solution mentioned in the white paper is what I
use in kernel NET policy.
The baseline is not an out of box Linux. The baseline did simple configuration which
people usually do (disable irqbalance, set queue irq affinity, set CPU affinity) for
better performance.
https://01.org/improve-network-performance-setting-queue-interrupt-moderation-linux
You may find that the performance data for NET policy is not as good as the data in
white paper. That's because the kernel implementation doesn't set CPU affinity for
application. There is also a little bit overhead for current kernel implementation.
Thanks,
Kan
>
> > For "MIX" policy, mixed workloads performance is evaluated. per-queue interrupt moderation solution
> > The mixed workloads are combination of throughput-first workload and
> > latency-first workload. Five different types of combinations are
> > evaluated (pure throughput-first workload, pure latency-first
> > workloads,
> > 2/3 throughput-first workload + 1/3 latency-first workloads,
> > 1/3 throughput-first workload + 2/3 latency-first workloads and
> > 1/2 throughput-first workload + 1/2 latency-first workloads).
> > For caculating the performance of mixed workloads, a weighted sum
> > system is introduced.
> > Score = normalized_latency * Weight + normalized_throughput * (1 -
> Weight).
> > If we assume that the user has an equal interest in latency and
> > throughput performance, the Score for "MIX" policy is on average ~1.52X
> than baseline.
>
> This scoring system of yours makes no sense. Just give us the numbers on
> what the average latency did versus your "baseline" and the same for the
> throughput.
>
> > Kan Liang (30):
> > net: introduce NET policy
> > net/netpolicy: init NET policy
> > i40e/netpolicy: Implement ndo_netpolicy_init
> > net/netpolicy: get driver information
> > i40e/netpolicy: implement ndo_get_irq_info
> > net/netpolicy: get CPU information
> > net/netpolicy: create CPU and queue mapping
> > net/netpolicy: set and remove irq affinity
> > net/netpolicy: enable and disable net policy
> > net/netpolicy: introduce netpolicy object
> > net/netpolicy: set net policy by policy name
> > i40e/netpolicy: implement ndo_set_net_policy
> > i40e/netpolicy: add three new net policies
> > net/netpolicy: add MIX policy
> > i40e/netpolicy: add MIX policy support
> > net/netpolicy: net device hotplug
> > net/netpolicy: support CPU hotplug
> > net/netpolicy: handle channel changes
> > net/netpolicy: implement netpolicy register
> > net/netpolicy: introduce per socket netpolicy
> > net/policy: introduce netpolicy_pick_queue
> > net/netpolicy: set tx queues according to policy
> > i40e/ethtool: support RX_CLS_LOC_ANY
> > net/netpolicy: set rx queues according to policy
> > net/netpolicy: introduce per task net policy
> > net/netpolicy: set per task policy by proc
> > net/netpolicy: fast path for finding the queues
> > net/netpolicy: optimize for queue pair
> > net/netpolicy: limit the total record number
> > Documentation/networking: Document net policy
>
> 30 patches is quite a bit to review. You might have better luck getting review
> and/or feedback if you could split this up into at least 2 patch sets of 15 or so
> patches when you try to actually submit this.
More information about the Intel-wired-lan
mailing list