[Intel-wired-lan] [next PATCH S41 3/5] i40e: Add support for HMC resource and profile for X722

Bimmy Pujari bimmy.pujari at intel.com
Wed Aug 3 17:20:13 UTC 2016


From: Carolyn Wyborny <carolyn.wyborny at intel.com>

This patch adds support for HMC resource and profile cmds for X722
firmware. 

Signed-off-by: Carolyn Wyborny <carolyn.wyborny at intel.com>
Change-ID: Icc332101f38ab15d1bfa167823100eb4f6822f7e
---
 drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h  | 23 ++++++++++++++++++++++
 .../net/ethernet/intel/i40evf/i40e_adminq_cmd.h    | 23 ++++++++++++++++++++++
 2 files changed, 46 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
index 11cf1a5..aabacc3 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
@@ -204,6 +204,11 @@ enum i40e_admin_queue_opc {
 	i40e_aqc_opc_suspend_port_tx				= 0x041B,
 	i40e_aqc_opc_resume_port_tx				= 0x041C,
 	i40e_aqc_opc_configure_partition_bw			= 0x041D,
+	/* hmc */
+	i40e_aqc_opc_query_hmc_resource_profile	= 0x0500,
+	i40e_aqc_opc_set_hmc_resource_profile	= 0x0501,
+
+	/* phy commands*/
 
 	/* phy commands*/
 	i40e_aqc_opc_get_phy_abilities		= 0x0600,
@@ -1582,6 +1587,24 @@ struct i40e_aqc_configure_partition_bw_data {
 
 I40E_CHECK_STRUCT_LEN(0x22, i40e_aqc_configure_partition_bw_data);
 
+/* Get and set the active HMC resource profile and status.
+ * (direct 0x0500) and (direct 0x0501)
+ */
+struct i40e_aq_get_set_hmc_resource_profile {
+	u8	pm_profile;
+	u8	pe_vf_enabled;
+	u8	reserved[14];
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aq_get_set_hmc_resource_profile);
+
+enum i40e_aq_hmc_profile {
+	/* I40E_HMC_PROFILE_NO_CHANGE	= 0, reserved */
+	I40E_HMC_PROFILE_DEFAULT	= 1,
+	I40E_HMC_PROFILE_FAVOR_VF	= 2,
+	I40E_HMC_PROFILE_EQUAL		= 3,
+};
+
 /* Get PHY Abilities (indirect 0x0600) uses the generic indirect struct */
 
 /* set in param0 for get phy abilities to report qualified modules */
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h
index 3114dcf..c07e3a3 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h
@@ -204,6 +204,11 @@ enum i40e_admin_queue_opc {
 	i40e_aqc_opc_suspend_port_tx				= 0x041B,
 	i40e_aqc_opc_resume_port_tx				= 0x041C,
 	i40e_aqc_opc_configure_partition_bw			= 0x041D,
+	/* hmc */
+	i40e_aqc_opc_query_hmc_resource_profile	= 0x0500,
+	i40e_aqc_opc_set_hmc_resource_profile	= 0x0501,
+
+	/* phy commands*/
 
 	/* phy commands*/
 	i40e_aqc_opc_get_phy_abilities		= 0x0600,
@@ -1579,6 +1584,24 @@ struct i40e_aqc_configure_partition_bw_data {
 
 I40E_CHECK_STRUCT_LEN(0x22, i40e_aqc_configure_partition_bw_data);
 
+/* Get and set the active HMC resource profile and status.
+ * (direct 0x0500) and (direct 0x0501)
+ */
+struct i40e_aq_get_set_hmc_resource_profile {
+	u8	pm_profile;
+	u8	pe_vf_enabled;
+	u8	reserved[14];
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aq_get_set_hmc_resource_profile);
+
+enum i40e_aq_hmc_profile {
+	/* I40E_HMC_PROFILE_NO_CHANGE	= 0, reserved */
+	I40E_HMC_PROFILE_DEFAULT	= 1,
+	I40E_HMC_PROFILE_FAVOR_VF	= 2,
+	I40E_HMC_PROFILE_EQUAL		= 3,
+};
+
 /* Get PHY Abilities (indirect 0x0600) uses the generic indirect struct */
 
 /* set in param0 for get phy abilities to report qualified modules */
-- 
2.4.11



More information about the Intel-wired-lan mailing list