[Intel-wired-lan] e1000e: PHY cann't be initialized correctly on some I218 controllers

[Denis Turischev]

Hi Raanan,

On 08/04/2016 07:18 PM, Raanan Avargil wrote:
> It is hard to determine what is exactly the problem here and what causes the -3 error, but this is not the place to perform hw reset and retry to init the phy.

I agree that may be this is not the correct place for hw reset, can you advice about another solution?

It works, not only for me, for example it helps here:
http://www.linux.org.ru/forum/linux-hardware/10268216

Another fact that Windows drivers work fine with the same hw.

Denis