[Intel-wired-lan] e1000e: PHY cann't be initialized correctly on some I218 controllers
Brown, Aaron F
aaron.f.brown at intel.com
Tue Aug 9 18:59:04 UTC 2016
> -----Original Message-----
> From: Avargil, Raanan
> Sent: Tuesday, August 9, 2016 8:11 AM
> To: Denis Turischev <denis.turischev at compulab.co.il>; intel-wired-
> lan at lists.osuosl.org; Brown, Aaron F <aaron.f.brown at intel.com>; Kirsher,
> Jeffrey T <jeffrey.t.kirsher at intel.com>
> Cc: netdev at vger.kernel.org; linux-kernel at vger.kernel.org
> Subject: Re: [Intel-wired-lan] e1000e: PHY cann't be initialized correctly on
> some I218 controllers
>
>
>
> On 8/7/2016 11:56, Denis Turischev wrote:
> > Hi Raanan,
> >
> > On 08/04/2016 07:18 PM, Raanan Avargil wrote:
> >> It is hard to determine what is exactly the problem here and what causes
> the -3 error, but this is not the place to perform hw reset and retry to init the
> phy.
> > I agree that may be this is not the correct place for hw reset, can you advice
> about another solution?
> >
> > It works, not only for me, for example it helps here:
> > http://www.linux.org.ru/forum/linux-hardware/10268216
> >
> > Another fact that Windows drivers work fine with the same hw.
> >
> > Denis
> >
>
> Hi Denis,
>
> More suitable place to retry init the device would be in probe function.
> However, we haven't seen initialization issues like this on i218.
>
> Adding Aaron.
>
> @Aaron - have you seen initialization errors on i218 devices?
I have not. But I don't have many systems with i218 so all that means is my systems do not exhibit the problem.
>
> Raanan
More information about the Intel-wired-lan
mailing list