[Intel-wired-lan] Kernel 4.6.7-rt13: Intel Ethernet driver igb causes huge latencies in cyclictest
Koehrer Mathias (ETAS/ESW5)
mathias.koehrer at etas.com
Thu Oct 6 07:01:36 UTC 2016
Hi all,
>
> Although, to be clear, it isn't the fact that there exists 8 threads, it's that the device is
> firing all 8 interrupts at the same time. The time spent in hardirq context just waking
> up all 8 of those threads (and the cyclictest wakeup) is enough to cause your
> regression.
>
> netdev/igb folks-
>
> Under what conditions should it be expected that the i350 trigger all of the TxRx
> interrupts simultaneously? Any ideas here?
>
> See the start of this thread here:
>
> http://lkml.kernel.org/r/d648628329bc446fa63b5e19d4d3fb56@FE-
> MBX1012.de.bosch.com
>
Greg recommended to use "ethtool -L eth2 combined 1" to reduce the number of queues.
I tried that. Now, I have actually only three irqs (eth2, eth2-rx-0, eth2-tx-0).
However the issue remains the same.
I ran the cyclictest again:
# cyclictest -a -i 105 -m -n -p 80 -t 1 -b 23 -C
(Note: When using 105us instead of 100us the long latencies seem to occur more often).
Here are the final lines of the kernel trace output:
<idle>-0 4d...2.. 1344661649us : sched_switch: prev_comm=swapper/4 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=rcuc/4 next_pid=56 next_prio=98
ktimerso-46 3d...2.. 1344661650us : sched_switch: prev_comm=ktimersoftd/3 prev_pid=46 prev_prio=98 prev_state=S ==> next_comm=swapper/3 next_pid=0 next_prio=120
ktimerso-24 1d...2.. 1344661650us : sched_switch: prev_comm=ktimersoftd/1 prev_pid=24 prev_prio=98 prev_state=S ==> next_comm=swapper/1 next_pid=0 next_prio=120
ktimerso-79 6d...2.. 1344661650us : sched_switch: prev_comm=ktimersoftd/6 prev_pid=79 prev_prio=98 prev_state=S ==> next_comm=swapper/6 next_pid=0 next_prio=120
ktimerso-35 2d...2.. 1344661650us : sched_switch: prev_comm=ktimersoftd/2 prev_pid=35 prev_prio=98 prev_state=S ==> next_comm=swapper/2 next_pid=0 next_prio=120
rcuc/5-67 5d...2.. 1344661650us : sched_switch: prev_comm=rcuc/5 prev_pid=67 prev_prio=98 prev_state=S ==> next_comm=ktimersoftd/5 next_pid=68 next_prio=98
rcuc/7-89 7d...2.. 1344661650us : sched_switch: prev_comm=rcuc/7 prev_pid=89 prev_prio=98 prev_state=S ==> next_comm=ktimersoftd/7 next_pid=90 next_prio=98
ktimerso-4 0d...211 1344661650us : sched_wakeup: comm=rcu_preempt pid=8 prio=98 target_cpu=000
rcuc/4-56 4d...2.. 1344661651us : sched_switch: prev_comm=rcuc/4 prev_pid=56 prev_prio=98 prev_state=S ==> next_comm=ktimersoftd/4 next_pid=57 next_prio=98
ktimerso-4 0d...2.. 1344661651us : sched_switch: prev_comm=ktimersoftd/0 prev_pid=4 prev_prio=98 prev_state=S ==> next_comm=rcu_preempt next_pid=8 next_prio=98
ktimerso-90 7d...2.. 1344661651us : sched_switch: prev_comm=ktimersoftd/7 prev_pid=90 prev_prio=98 prev_state=S ==> next_comm=swapper/7 next_pid=0 next_prio=120
ktimerso-68 5d...2.. 1344661651us : sched_switch: prev_comm=ktimersoftd/5 prev_pid=68 prev_prio=98 prev_state=S ==> next_comm=swapper/5 next_pid=0 next_prio=120
rcu_pree-8 0d...3.. 1344661652us : sched_wakeup: comm=rcuop/0 pid=10 prio=120 target_cpu=000
ktimerso-57 4d...2.. 1344661652us : sched_switch: prev_comm=ktimersoftd/4 prev_pid=57 prev_prio=98 prev_state=S ==> next_comm=swapper/4 next_pid=0 next_prio=120
rcu_pree-8 0d...2.. 1344661653us+: sched_switch: prev_comm=rcu_preempt prev_pid=8 prev_prio=98 prev_state=S ==> next_comm=kworker/0:0 next_pid=5 next_prio=120
kworker/-5 0dN.h2.. 1344661741us : sched_wakeup: comm=cyclictest pid=6314 prio=19 target_cpu=000
kworker/-5 0d...2.. 1344661742us : sched_switch: prev_comm=kworker/0:0 prev_pid=5 prev_prio=120 prev_state=R+ ==> next_comm=cyclictest next_pid=6314 next_prio=19
cyclicte-6314 0d...2.. 1344661743us : sched_switch: prev_comm=cyclictest prev_pid=6314 prev_prio=19 prev_state=S ==> next_comm=rcuop/0 next_pid=10 next_prio=120
rcuop/0-10 0d...2.. 1344661744us!: sched_switch: prev_comm=rcuop/0 prev_pid=10 prev_prio=120 prev_state=S ==> next_comm=kworker/0:0 next_pid=5 next_prio=120
kworker/-5 0dN.h2.. 1344661858us : sched_wakeup: comm=cyclictest pid=6314 prio=19 target_cpu=000
kworker/-5 0d...2.. 1344661859us : sched_switch: prev_comm=kworker/0:0 prev_pid=5 prev_prio=120 prev_state=R+ ==> next_comm=cyclictest next_pid=6314 next_prio=19
cyclicte-6314 0d...2.. 1344661860us!: sched_switch: prev_comm=cyclictest prev_pid=6314 prev_prio=19 prev_state=S ==> next_comm=kworker/0:0 next_pid=5 next_prio=120
kworker/-5 0dN.h2.. 1344661966us : sched_wakeup: comm=cyclictest pid=6314 prio=19 target_cpu=000
kworker/-5 0d...2.. 1344661966us : sched_switch: prev_comm=kworker/0:0 prev_pid=5 prev_prio=120 prev_state=R+ ==> next_comm=cyclictest next_pid=6314 next_prio=19
cyclicte-6314 0d...2.. 1344661967us+: sched_switch: prev_comm=cyclictest prev_pid=6314 prev_prio=19 prev_state=S ==> next_comm=kworker/0:0 next_pid=5 next_prio=120
kworker/-5 0dN.h2.. 1344662052us : sched_wakeup: comm=cyclictest pid=6314 prio=19 target_cpu=000
kworker/-5 0d...2.. 1344662053us : sched_switch: prev_comm=kworker/0:0 prev_pid=5 prev_prio=120 prev_state=R+ ==> next_comm=cyclictest next_pid=6314 next_prio=19
cyclicte-6314 0d...2.. 1344662054us!: sched_switch: prev_comm=cyclictest prev_pid=6314 prev_prio=19 prev_state=S ==> next_comm=kworker/0:0 next_pid=5 next_prio=120
kworker/-5 0dN.h2.. 1344662168us : sched_wakeup: comm=cyclictest pid=6314 prio=19 target_cpu=000
kworker/-5 0d...2.. 1344662168us : sched_switch: prev_comm=kworker/0:0 prev_pid=5 prev_prio=120 prev_state=R+ ==> next_comm=cyclictest next_pid=6314 next_prio=19
cyclicte-6314 0d...2.. 1344662169us+: sched_switch: prev_comm=cyclictest prev_pid=6314 prev_prio=19 prev_state=S ==> next_comm=kworker/0:0 next_pid=5 next_prio=120
kworker/-5 0dN.h2.. 1344662255us : sched_wakeup: comm=irq/48-eth2-tx- pid=6310 prio=49 target_cpu=000
kworker/-5 0dN.h3.. 1344662256us : sched_wakeup: comm=irq/47-eth2-rx- pid=6309 prio=49 target_cpu=000
kworker/-5 0d...2.. 1344662256us : sched_switch: prev_comm=kworker/0:0 prev_pid=5 prev_prio=120 prev_state=R+ ==> next_comm=irq/48-eth2-tx- next_pid=6310 next_prio=49
irq/48-e-6310 0d...2.. 1344662259us : sched_switch: prev_comm=irq/48-eth2-tx- prev_pid=6310 prev_prio=49 prev_state=S ==> next_comm=irq/47-eth2-rx- next_pid=6309 next_prio=49
irq/47-e-6309 0d...2.. 1344662260us+: sched_switch: prev_comm=irq/47-eth2-rx- prev_pid=6309 prev_prio=49 prev_state=S ==> next_comm=kworker/0:0 next_pid=5 next_prio=120
kworker/-5 0dN.h2.. 1344662300us : sched_wakeup: comm=cyclictest pid=6314 prio=19 target_cpu=000
kworker/-5 0d...2.. 1344662300us : sched_switch: prev_comm=kworker/0:0 prev_pid=5 prev_prio=120 prev_state=R+ ==> next_comm=cyclictest next_pid=6314 next_prio=19
cyclicte-6314 0.....11 1344662306us : tracing_mark_write: hit latency threshold (39 > 23)
Just before the long latency, the irqs "48-eth2-tx" and "48-eth2-rx" are active.
When looking at the 4th line from the bottom, the time for irq/47 is 1344662260us, for the next line (kworker) it is 1344662300us.
Does this mean that the irq/47 took 40us for irq processing? Or is this a misinterpretation?
For more lines of the trace please see the attached trace-extract.gz.
Thanks for any feedback.
Regard
Mahias
-------------- next part --------------
A non-text attachment was scrubbed...
Name: trace-extract.gz
Type: application/x-gzip
Size: 1118 bytes
Desc: trace-extract.gz
URL: <http://lists.osuosl.org/pipermail/intel-wired-lan/attachments/20161006/b31356b0/attachment.bin>
More information about the Intel-wired-lan
mailing list