[Intel-wired-lan] Bug with 'igb: Remove GS40G specific defines/functions'
carges at vectranetworks.com
Wed Oct 12 20:27:52 UTC 2016
On 10/12/16, 3:19 PM, "Aaron Sierra" <asierra at xes-inc.com> wrote:
Someone else reported a similar issue back in April. Would you
mind taking a look at the discussion that we had back then to
see if it applies to you?
I’m not sure exactly which part I need to comment out to verify in ‘igb_init_phy_params_82575()’.
Is there a fix already planned for this? Any additional information I can provide?
--- Extreme Engineering Solutions, Inc (X-ES) ---
Senior Embedded Engineer
3225 Deming Way, Ste 120
Middleton, WI 53562
Phone: (608) 833-1155 x115
Email: asierra at xes-inc.com
----- Original Message -----
> From: "Chris Arges" <carges at vectranetworks.com>
> To: "Aaron Sierra" <asierra at xes-inc.com>, "jeffrey t kirsher" <jeffrey.t.kirsher at intel.com>
> Cc: "intel-wired-lan" <intel-wired-lan at lists.osuosl.org>
> Sent: Wednesday, October 12, 2016 2:51:41 PM
> Subject: Bug with 'igb: Remove GS40G specific defines/functions'
> I have an Intel I210 NIC which shows:
> 'igb: probe of 0000:07:00.0 failed wtih error -2'
> Upon boot after power has been completely disconnected.
> v4.4 works, while v4.5 fails and I was able to bisect it down to:
> commit 2a3cdead8b408351fa1e3079b220fa331480ffbc
> Any ideas for a fix? I'm happy to test any patches.
> (apologies for the resend, typed the wrong address.)
More information about the Intel-wired-lan