[Intel-wired-lan] [PATCH V2 RFC 2/2] ixgbe: ixgbe_atr() compute l4_proto only if non-paged data has network/transport headers
Alexander Duyck
alexander.duyck at gmail.com
Mon Oct 17 18:15:17 UTC 2016
On Mon, Oct 17, 2016 at 10:25 AM, Sowmini Varadhan
<sowmini.varadhan at oracle.com> wrote:
> For some Tx paths (e.g., tpacket_snd()), ixgbe_atr may be
> passed down an sk_buff that has the network and transport
> header in the paged data, so it needs to make sure these
> headers are available in the headlen bytes to calculate the
> l4_proto.
>
> This patch expect that network and transport headers are
> already available in the non-paged header dat. The assumption
> is that the caller has set this up if l4_proto based Tx
> steering is desired.
>
> Signed-off-by: Sowmini Varadhan <sowmini.varadhan at oracle.com>
> ---
> drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 18 ++++++++++++++++++
> 1 files changed, 18 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
> index eceb47b..2cc1dae 100644
> --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
> +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
> @@ -54,6 +54,7 @@
> #include <net/pkt_cls.h>
> #include <net/tc_act/tc_gact.h>
> #include <net/tc_act/tc_mirred.h>
> +#include <net/vxlan.h>
>
> #include "ixgbe.h"
> #include "ixgbe_common.h"
> @@ -7651,11 +7652,16 @@ static void ixgbe_atr(struct ixgbe_ring *ring,
> /* snag network header to get L4 type and address */
> skb = first->skb;
> hdr.network = skb_network_header(skb);
> + if (hdr.network <= skb->data || hdr.network >= skb_tail_pointer(skb))
> + return;
I would say you probably only need the first check here for skb->data
and could probably skip the second part. You will be testing for
skb_tail_pointer in all the other tests you added so this check is
redundant anyway.
Also you might want to go through and wrap these with unlikely() since
most of these are exception cases.
> if (skb->encapsulation &&
> first->protocol == htons(ETH_P_IP) &&
> hdr.ipv4->protocol == IPPROTO_UDP) {
> struct ixgbe_adapter *adapter = q_vector->adapter;
>
> + if (skb_tail_pointer(skb) < hdr.network + VXLAN_HEADROOM)
> + return;
> +
> /* verify the port is recognized as VXLAN */
> if (adapter->vxlan_port &&
> udp_hdr(skb)->dest == adapter->vxlan_port)
> @@ -7666,15 +7672,27 @@ static void ixgbe_atr(struct ixgbe_ring *ring,
> hdr.network = skb_inner_network_header(skb);
> }
>
> + /* Make sure we have at least [minimum IPv4 header + TCP]
> + * or [IPv6 header] bytes
> + */
> + if (skb_tail_pointer(skb) < hdr.network + 40)
> + return;
> +
> /* Currently only IPv4/IPv6 with TCP is supported */
> switch (hdr.ipv4->version) {
> case IPVERSION:
> /* access ihl as u8 to avoid unaligned access on ia64 */
> hlen = (hdr.network[0] & 0x0F) << 2;
> + if (skb_tail_pointer(skb) < hdr.network + hlen +
> + sizeof(struct tcphdr))
> + return;
> l4_proto = hdr.ipv4->protocol;
> break;
> case 6:
> hlen = hdr.network - skb->data;
> + if (skb_tail_pointer(skb) < hdr.network + hlen +
> + sizeof(struct tcphdr))
> + return;
> l4_proto = ipv6_find_hdr(skb, &hlen, IPPROTO_TCP, NULL, NULL);
> hlen -= hdr.network - skb->data;
> break;
I believe one more check is needed after this block to verify the TCP
header fields are present.
So you probably need to add a check for "skb_tail_pointer(skb) <
(hdr.network + hlen + 20)".
Thanks.
- Alex
More information about the Intel-wired-lan
mailing list