[Intel-wired-lan] [PATCH V2 4/4] ixgbe: Implement support for firmware-controlled PHYs

Mark D Rustad mark.d.rustad at intel.com
Wed Dec 7 21:59:39 UTC 2016


Implement support for devices that have firmware-controlled PHYs.

Signed-off-by: Mark Rustad <mark.d.rustad at intel.com>
---
Changes in V2:
- Fixed some oversights primarily related to 10M support
---
 drivers/net/ethernet/intel/ixgbe/ixgbe.h         |    4 
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c  |    7 
 drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c |  156 +++++++++
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c    |   45 +++
 drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c     |    3 
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h    |    7 
 drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c    |  387 ++++++++++++++++++++++
 7 files changed, 603 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index ef81c3d8c295..53fb427b1c29 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -661,6 +661,8 @@ struct ixgbe_adapter {
 #define IXGBE_FLAG2_PHY_INTERRUPT		BIT(11)
 #define IXGBE_FLAG2_UDP_TUN_REREG_NEEDED	BIT(12)
 #define IXGBE_FLAG2_VLAN_PROMISC		BIT(13)
+#define IXGBE_FLAG2_EEE_CAPABLE			BIT(14)
+#define IXGBE_FLAG2_EEE_ENABLED			BIT(15)
 
 	/* Tx fast path data */
 	int num_tx_queues;
@@ -862,6 +864,7 @@ enum ixgbe_boards {
 	board_X550,
 	board_X550EM_x,
 	board_x550em_a,
+	board_x550em_a_fw,
 };
 
 extern const struct ixgbe_info ixgbe_82598_info;
@@ -870,6 +873,7 @@ extern const struct ixgbe_info ixgbe_X540_info;
 extern const struct ixgbe_info ixgbe_X550_info;
 extern const struct ixgbe_info ixgbe_X550EM_x_info;
 extern const struct ixgbe_info ixgbe_x550em_a_info;
+extern const struct ixgbe_info ixgbe_x550em_a_fw_info;
 #ifdef CONFIG_IXGBE_DCB
 extern const struct dcbnl_rtnl_ops dcbnl_ops;
 #endif
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 851f48555506..08eb4fddb8fd 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -3382,6 +3382,13 @@ s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
 		else
 			*speed = IXGBE_LINK_SPEED_100_FULL;
 		break;
+	case IXGBE_LINKS_SPEED_10_X550EM_A:
+		*speed = IXGBE_LINK_SPEED_UNKNOWN;
+		if (hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T ||
+		    hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T_L) {
+			*speed = IXGBE_LINK_SPEED_10_FULL;
+		}
+		break;
 	default:
 		*speed = IXGBE_LINK_SPEED_UNKNOWN;
 	}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index fd192bf29b26..f19cbc761748 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -197,15 +197,17 @@ static int ixgbe_get_settings(struct net_device *netdev,
 				   SUPPORTED_1000baseKX_Full :
 				   SUPPORTED_1000baseT_Full;
 	if (supported_link & IXGBE_LINK_SPEED_100_FULL)
-		ecmd->supported |= ixgbe_isbackplane(hw->phy.media_type) ?
-				   SUPPORTED_1000baseKX_Full :
-				   SUPPORTED_1000baseT_Full;
+		ecmd->supported |= SUPPORTED_100baseT_Full;
+	if (supported_link & IXGBE_LINK_SPEED_10_FULL)
+		ecmd->supported |= SUPPORTED_10baseT_Full;
 
 	/* default advertised speed if phy.autoneg_advertised isn't set */
 	ecmd->advertising = ecmd->supported;
 	/* set the advertised speeds */
 	if (hw->phy.autoneg_advertised) {
 		ecmd->advertising = 0;
+		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10_FULL)
+			ecmd->advertising |= ADVERTISED_10baseT_Full;
 		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
 			ecmd->advertising |= ADVERTISED_100baseT_Full;
 		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
@@ -237,6 +239,7 @@ static int ixgbe_get_settings(struct net_device *netdev,
 	case ixgbe_phy_tn:
 	case ixgbe_phy_aq:
 	case ixgbe_phy_x550em_ext_t:
+	case ixgbe_phy_fw:
 	case ixgbe_phy_cu_unknown:
 		ecmd->supported |= SUPPORTED_TP;
 		ecmd->advertising |= ADVERTISED_TP;
@@ -337,6 +340,9 @@ static int ixgbe_get_settings(struct net_device *netdev,
 		case IXGBE_LINK_SPEED_10GB_FULL:
 			ethtool_cmd_speed_set(ecmd, SPEED_10000);
 			break;
+		case IXGBE_LINK_SPEED_5GB_FULL:
+			ethtool_cmd_speed_set(ecmd, SPEED_5000);
+			break;
 		case IXGBE_LINK_SPEED_2_5GB_FULL:
 			ethtool_cmd_speed_set(ecmd, SPEED_2500);
 			break;
@@ -346,6 +352,9 @@ static int ixgbe_get_settings(struct net_device *netdev,
 		case IXGBE_LINK_SPEED_100_FULL:
 			ethtool_cmd_speed_set(ecmd, SPEED_100);
 			break;
+		case IXGBE_LINK_SPEED_10_FULL:
+			ethtool_cmd_speed_set(ecmd, SPEED_10);
+			break;
 		default:
 			break;
 		}
@@ -394,6 +403,9 @@ static int ixgbe_set_settings(struct net_device *netdev,
 		if (ecmd->advertising & ADVERTISED_100baseT_Full)
 			advertised |= IXGBE_LINK_SPEED_100_FULL;
 
+		if (ecmd->advertising & ADVERTISED_10baseT_Full)
+			advertised |= IXGBE_LINK_SPEED_10_FULL;
+
 		if (old == advertised)
 			return err;
 		/* this sets the link speed and restarts auto-neg */
@@ -3173,6 +3185,9 @@ static int ixgbe_get_module_info(struct net_device *dev,
 	u8 sff8472_rev, addr_mode;
 	bool page_swap = false;
 
+	if (hw->phy.type == ixgbe_phy_fw)
+		return -ENXIO;
+
 	/* Check whether we support SFF-8472 or not */
 	status = hw->phy.ops.read_i2c_eeprom(hw,
 					     IXGBE_SFF_SFF_8472_COMP,
@@ -3218,6 +3233,9 @@ static int ixgbe_get_module_eeprom(struct net_device *dev,
 	if (ee->len == 0)
 		return -EINVAL;
 
+	if (hw->phy.type == ixgbe_phy_fw)
+		return -ENXIO;
+
 	for (i = ee->offset; i < ee->offset + ee->len; i++) {
 		/* I2C reads can take long time */
 		if (test_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
@@ -3237,6 +3255,136 @@ static int ixgbe_get_module_eeprom(struct net_device *dev,
 	return 0;
 }
 
+static const struct {
+	ixgbe_link_speed mac_speed;
+	u32 supported;
+} ixgbe_ls_map[] = {
+	{ IXGBE_LINK_SPEED_10_FULL, SUPPORTED_10baseT_Full },
+	{ IXGBE_LINK_SPEED_100_FULL, SUPPORTED_100baseT_Full },
+	{ IXGBE_LINK_SPEED_1GB_FULL, SUPPORTED_1000baseT_Full },
+	{ IXGBE_LINK_SPEED_2_5GB_FULL, SUPPORTED_2500baseX_Full },
+	{ IXGBE_LINK_SPEED_10GB_FULL, SUPPORTED_10000baseT_Full },
+};
+
+static const struct {
+	u32 lp_advertised;
+	u32 mac_speed;
+} ixgbe_lp_map[] = {
+	{ FW_PHY_ACT_UD_2_100M_TX_EEE, SUPPORTED_100baseT_Full },
+	{ FW_PHY_ACT_UD_2_1G_T_EEE, SUPPORTED_1000baseT_Full },
+	{ FW_PHY_ACT_UD_2_10G_T_EEE, SUPPORTED_10000baseT_Full },
+	{ FW_PHY_ACT_UD_2_1G_KX_EEE, SUPPORTED_1000baseKX_Full },
+	{ FW_PHY_ACT_UD_2_10G_KX4_EEE, SUPPORTED_10000baseKX4_Full },
+	{ FW_PHY_ACT_UD_2_10G_KR_EEE, SUPPORTED_10000baseKR_Full},
+};
+
+static int
+ixgbe_get_eee_fw(struct ixgbe_adapter *adapter, struct ethtool_eee *edata)
+{
+	u32 info[FW_PHY_ACT_DATA_COUNT] = { 0 };
+	struct ixgbe_hw *hw = &adapter->hw;
+	s32 rc;
+	u16 i;
+
+	rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_UD_2, &info);
+	if (rc)
+		return rc;
+
+	edata->lp_advertised = 0;
+	for (i = 0; i < ARRAY_SIZE(ixgbe_lp_map); ++i) {
+		if (info[0] & ixgbe_lp_map[i].lp_advertised)
+			edata->lp_advertised |= ixgbe_lp_map[i].mac_speed;
+	}
+
+	edata->supported = 0;
+	for (i = 0; i < ARRAY_SIZE(ixgbe_ls_map); ++i) {
+		if (hw->phy.eee_speeds_supported & ixgbe_ls_map[i].mac_speed)
+			edata->supported |= ixgbe_ls_map[i].supported;
+	}
+
+	edata->advertised = 0;
+	for (i = 0; i < ARRAY_SIZE(ixgbe_ls_map); ++i) {
+		if (hw->phy.eee_speeds_advertised & ixgbe_ls_map[i].mac_speed)
+			edata->advertised |= ixgbe_ls_map[i].supported;
+	}
+
+	edata->eee_enabled = !!edata->advertised;
+	edata->tx_lpi_enabled = edata->eee_enabled;
+	if (edata->advertised & edata->lp_advertised)
+		edata->eee_active = true;
+
+	return 0;
+}
+
+static int ixgbe_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	if (!(adapter->flags2 & IXGBE_FLAG2_EEE_CAPABLE))
+		return -EOPNOTSUPP;
+
+	if (hw->phy.eee_speeds_supported && hw->phy.type == ixgbe_phy_fw)
+		return ixgbe_get_eee_fw(adapter, edata);
+
+	return -EOPNOTSUPP;
+}
+
+static int ixgbe_set_eee(struct net_device *netdev, struct ethtool_eee *edata)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct ethtool_eee eee_data;
+	s32 ret_val;
+
+	if (!(adapter->flags2 & IXGBE_FLAG2_EEE_CAPABLE))
+		return -EOPNOTSUPP;
+
+	memset(&eee_data, 0, sizeof(struct ethtool_eee));
+
+	ret_val = ixgbe_get_eee(netdev, &eee_data);
+	if (ret_val)
+		return ret_val;
+
+	if (eee_data.eee_enabled && !edata->eee_enabled) {
+		if (eee_data.tx_lpi_enabled != edata->tx_lpi_enabled) {
+			e_err(drv, "Setting EEE tx-lpi is not supported\n");
+			return -EINVAL;
+		}
+
+		if (eee_data.tx_lpi_timer != edata->tx_lpi_timer) {
+			e_err(drv,
+			      "Setting EEE Tx LPI timer is not supported\n");
+			return -EINVAL;
+		}
+
+		if (eee_data.advertised != edata->advertised) {
+			e_err(drv,
+			      "Setting EEE advertised speeds is not supported\n");
+			return -EINVAL;
+		}
+	}
+
+	if (eee_data.eee_enabled != edata->eee_enabled) {
+		if (edata->eee_enabled) {
+			adapter->flags2 |= IXGBE_FLAG2_EEE_ENABLED;
+			hw->phy.eee_speeds_advertised =
+						   hw->phy.eee_speeds_supported;
+		} else {
+			adapter->flags2 &= ~IXGBE_FLAG2_EEE_ENABLED;
+			hw->phy.eee_speeds_advertised = 0;
+		}
+
+		/* reset link */
+		if (netif_running(netdev))
+			ixgbe_reinit_locked(adapter);
+		else
+			ixgbe_reset(adapter);
+	}
+
+	return 0;
+}
+
 static const struct ethtool_ops ixgbe_ethtool_ops = {
 	.get_settings           = ixgbe_get_settings,
 	.set_settings           = ixgbe_set_settings,
@@ -3269,6 +3417,8 @@ static const struct ethtool_ops ixgbe_ethtool_ops = {
 	.get_rxfh_key_size	= ixgbe_get_rxfh_key_size,
 	.get_rxfh		= ixgbe_get_rxfh,
 	.set_rxfh		= ixgbe_set_rxfh,
+	.get_eee		= ixgbe_get_eee,
+	.set_eee		= ixgbe_set_eee,
 	.get_channels		= ixgbe_get_channels,
 	.set_channels		= ixgbe_set_channels,
 	.get_ts_info		= ixgbe_get_ts_info,
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 0b1fa5d557ba..0da6381ca800 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -86,6 +86,7 @@ static const struct ixgbe_info *ixgbe_info_tbl[] = {
 	[board_X550]		= &ixgbe_X550_info,
 	[board_X550EM_x]	= &ixgbe_X550EM_x_info,
 	[board_x550em_a]	= &ixgbe_x550em_a_info,
+	[board_x550em_a_fw]	= &ixgbe_x550em_a_fw_info,
 };
 
 /* ixgbe_pci_tbl - PCI Device ID Table
@@ -140,6 +141,8 @@ static const struct pci_device_id ixgbe_pci_tbl[] = {
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_A_SGMII_L), board_x550em_a },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_A_10G_T), board_x550em_a},
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_A_SFP), board_x550em_a },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_A_1G_T), board_x550em_a_fw },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_A_1G_T_L), board_x550em_a_fw },
 	/* required last entry */
 	{0, }
 };
@@ -180,6 +183,7 @@ MODULE_VERSION(DRV_VERSION);
 static struct workqueue_struct *ixgbe_wq;
 
 static bool ixgbe_check_cfg_remove(struct ixgbe_hw *hw, struct pci_dev *pdev);
+static void ixgbe_watchdog_link_is_down(struct ixgbe_adapter *);
 
 static int ixgbe_read_pci_cfg_word_parent(struct ixgbe_adapter *adapter,
 					  u32 reg, u16 *value)
@@ -5294,6 +5298,8 @@ void ixgbe_reinit_locked(struct ixgbe_adapter *adapter)
 
 	while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
 		usleep_range(1000, 2000);
+	if (adapter->hw.phy.type == ixgbe_phy_fw)
+		ixgbe_watchdog_link_is_down(adapter);
 	ixgbe_down(adapter);
 	/*
 	 * If SR-IOV enabled then wait a bit before bringing the adapter
@@ -5554,6 +5560,31 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
 }
 
 /**
+ * ixgbe_eee_capable - helper function to determine EEE support on X550
+ * @adapter: board private structure
+ */
+static void ixgbe_set_eee_capable(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+
+	switch (hw->device_id) {
+	case IXGBE_DEV_ID_X550EM_A_1G_T:
+	case IXGBE_DEV_ID_X550EM_A_1G_T_L:
+		if (!hw->phy.eee_speeds_supported)
+			break;
+		adapter->flags2 |= IXGBE_FLAG2_EEE_CAPABLE;
+		if (!hw->phy.eee_speeds_advertised)
+			break;
+		adapter->flags2 |= IXGBE_FLAG2_EEE_ENABLED;
+		break;
+	default:
+		adapter->flags2 &= ~IXGBE_FLAG2_EEE_CAPABLE;
+		adapter->flags2 &= ~IXGBE_FLAG2_EEE_ENABLED;
+		break;
+	}
+}
+
+/**
  * ixgbe_tx_timeout - Respond to a Tx Hang
  * @netdev: network interface device structure
  **/
@@ -5717,6 +5748,14 @@ static int ixgbe_sw_init(struct ixgbe_adapter *adapter,
 		break;
 	case ixgbe_mac_x550em_a:
 		adapter->flags |= IXGBE_FLAG_GENEVE_OFFLOAD_CAPABLE;
+		switch (hw->device_id) {
+		case IXGBE_DEV_ID_X550EM_A_1G_T:
+		case IXGBE_DEV_ID_X550EM_A_1G_T_L:
+			adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE;
+			break;
+		default:
+			break;
+		}
 	/* fall through */
 	case ixgbe_mac_X550EM_x:
 #ifdef CONFIG_IXGBE_DCB
@@ -5730,6 +5769,8 @@ static int ixgbe_sw_init(struct ixgbe_adapter *adapter,
 #endif /* IXGBE_FCOE */
 	/* Fall Through */
 	case ixgbe_mac_X550:
+		if (hw->mac.type == ixgbe_mac_X550)
+			adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE;
 #ifdef CONFIG_IXGBE_DCA
 		adapter->flags &= ~IXGBE_FLAG_DCA_CAPABLE;
 #endif
@@ -6807,6 +6848,9 @@ static void ixgbe_watchdog_link_is_up(struct ixgbe_adapter *adapter)
 	case IXGBE_LINK_SPEED_100_FULL:
 		speed_str = "100 Mbps";
 		break;
+	case IXGBE_LINK_SPEED_10_FULL:
+		speed_str = "10 Mbps";
+		break;
 	default:
 		speed_str = "unknown speed";
 		break;
@@ -9591,6 +9635,7 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	hw->phy.reset_if_overtemp = true;
 	err = hw->mac.ops.reset_hw(hw);
 	hw->phy.reset_if_overtemp = false;
+	ixgbe_set_eee_capable(adapter);
 	if (err == IXGBE_ERR_SFP_NOT_PRESENT) {
 		err = 0;
 	} else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
index 989a3b19d209..92dc4699b8c7 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
@@ -784,6 +784,9 @@ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
 	if (speed & IXGBE_LINK_SPEED_100_FULL)
 		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL;
 
+	if (speed & IXGBE_LINK_SPEED_10_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10_FULL;
+
 	/* Setup link based on the new speed settings */
 	if (hw->phy.ops.setup_link)
 		hw->phy.ops.setup_link(hw);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index acdbd81df3a4..4200f7450bcd 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -92,6 +92,8 @@
 #define IXGBE_DEV_ID_X550EM_A_SGMII_L	0x15C7
 #define IXGBE_DEV_ID_X550EM_A_10G_T	0x15C8
 #define IXGBE_DEV_ID_X550EM_A_SFP	0x15CE
+#define IXGBE_DEV_ID_X550EM_A_1G_T	0x15E4
+#define IXGBE_DEV_ID_X550EM_A_1G_T_L	0x15E5
 
 /* VF Device IDs */
 #define IXGBE_DEV_ID_82599_VF		0x10ED
@@ -1914,6 +1916,7 @@ enum {
 #define IXGBE_LINKS_SPEED_10G_82599 0x30000000
 #define IXGBE_LINKS_SPEED_1G_82599  0x20000000
 #define IXGBE_LINKS_SPEED_100_82599 0x10000000
+#define IXGBE_LINKS_SPEED_10_X550EM_A 0
 #define IXGBE_LINK_UP_TIME      90 /* 9.0 Seconds */
 #define IXGBE_AUTO_NEG_TIME     45 /* 4.5 Seconds */
 
@@ -2926,6 +2929,7 @@ typedef u32 ixgbe_autoneg_advertised;
 /* Link speed */
 typedef u32 ixgbe_link_speed;
 #define IXGBE_LINK_SPEED_UNKNOWN	0
+#define IXGBE_LINK_SPEED_10_FULL	0x0002
 #define IXGBE_LINK_SPEED_100_FULL	0x0008
 #define IXGBE_LINK_SPEED_1GB_FULL	0x0020
 #define IXGBE_LINK_SPEED_2_5GB_FULL	0x0400
@@ -3141,6 +3145,7 @@ enum ixgbe_phy_type {
 	ixgbe_phy_qsfp_unknown,
 	ixgbe_phy_sfp_unsupported,
 	ixgbe_phy_sgmii,
+	ixgbe_phy_fw,
 	ixgbe_phy_generic
 };
 
@@ -3555,6 +3560,8 @@ struct ixgbe_phy_info {
 	bool                            reset_disable;
 	ixgbe_autoneg_advertised        autoneg_advertised;
 	ixgbe_link_speed		speeds_supported;
+	ixgbe_link_speed		eee_speeds_supported;
+	ixgbe_link_speed		eee_speeds_advertised;
 	enum ixgbe_smart_speed          smart_speed;
 	bool                            smart_speed_active;
 	bool                            multispeed_fiber;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index 9284b8f0178d..0adedbba7a90 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -63,6 +63,18 @@ static s32 ixgbe_get_invariants_X550_a(struct ixgbe_hw *hw)
 	return 0;
 }
 
+static s32 ixgbe_get_invariants_X550_a_fw(struct ixgbe_hw *hw)
+{
+	struct ixgbe_phy_info *phy = &hw->phy;
+
+	/* Start with X540 invariants, since so similar */
+	ixgbe_get_invariants_X540(hw);
+
+	phy->ops.set_phy_power = NULL;
+
+	return 0;
+}
+
 /** ixgbe_setup_mux_ctl - Setup ESDP register for I2C mux control
  *  @hw: pointer to hardware structure
  **/
@@ -447,6 +459,159 @@ s32 ixgbe_fw_phy_activity(struct ixgbe_hw *hw, u16 activity,
 	return IXGBE_ERR_HOST_INTERFACE_COMMAND;
 }
 
+static const struct {
+	u16 fw_speed;
+	ixgbe_link_speed phy_speed;
+} ixgbe_fw_map[] = {
+	{ FW_PHY_ACT_LINK_SPEED_10, IXGBE_LINK_SPEED_10_FULL },
+	{ FW_PHY_ACT_LINK_SPEED_100, IXGBE_LINK_SPEED_100_FULL },
+	{ FW_PHY_ACT_LINK_SPEED_1G, IXGBE_LINK_SPEED_1GB_FULL },
+	{ FW_PHY_ACT_LINK_SPEED_2_5G, IXGBE_LINK_SPEED_2_5GB_FULL },
+	{ FW_PHY_ACT_LINK_SPEED_5G, IXGBE_LINK_SPEED_5GB_FULL },
+	{ FW_PHY_ACT_LINK_SPEED_10G, IXGBE_LINK_SPEED_10GB_FULL },
+};
+
+/**
+ * ixgbe_get_phy_id_fw - Get the phy ID via firmware command
+ * @hw: pointer to hardware structure
+ *
+ * Returns error code
+ */
+static s32 ixgbe_get_phy_id_fw(struct ixgbe_hw *hw)
+{
+	u32 info[FW_PHY_ACT_DATA_COUNT] = { 0 };
+	u16 phy_speeds;
+	u16 phy_id_lo;
+	s32 rc;
+	u16 i;
+
+	if (hw->phy.id)
+		return 0;
+
+	rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_PHY_INFO, &info);
+	if (rc)
+		return rc;
+
+	hw->phy.speeds_supported = 0;
+	phy_speeds = info[0] & FW_PHY_INFO_SPEED_MASK;
+	for (i = 0; i < ARRAY_SIZE(ixgbe_fw_map); ++i) {
+		if (phy_speeds & ixgbe_fw_map[i].fw_speed)
+			hw->phy.speeds_supported |= ixgbe_fw_map[i].phy_speed;
+	}
+
+	hw->phy.id = info[0] & FW_PHY_INFO_ID_HI_MASK;
+	phy_id_lo = info[1] & FW_PHY_INFO_ID_LO_MASK;
+	hw->phy.id |= phy_id_lo & IXGBE_PHY_REVISION_MASK;
+	hw->phy.revision = phy_id_lo & ~IXGBE_PHY_REVISION_MASK;
+	if (!hw->phy.id || hw->phy.id == IXGBE_PHY_REVISION_MASK)
+		return IXGBE_ERR_PHY_ADDR_INVALID;
+
+	hw->phy.autoneg_advertised = hw->phy.speeds_supported;
+	hw->phy.eee_speeds_supported = IXGBE_LINK_SPEED_100_FULL |
+				       IXGBE_LINK_SPEED_1GB_FULL;
+	hw->phy.eee_speeds_advertised = hw->phy.eee_speeds_supported;
+	return 0;
+}
+
+/**
+ * ixgbe_identify_phy_fw - Get PHY type based on firmware command
+ * @hw: pointer to hardware structure
+ *
+ * Returns error code
+ */
+static s32 ixgbe_identify_phy_fw(struct ixgbe_hw *hw)
+{
+	if (hw->bus.lan_id)
+		hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM;
+	else
+		hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM;
+
+	hw->phy.type = ixgbe_phy_fw;
+	hw->phy.ops.read_reg = NULL;
+	hw->phy.ops.write_reg = NULL;
+	return ixgbe_get_phy_id_fw(hw);
+}
+
+/**
+ * ixgbe_shutdown_fw_phy - Shutdown a firmware-controlled PHY
+ * @hw: pointer to hardware structure
+ *
+ * Returns error code
+ */
+static s32 ixgbe_shutdown_fw_phy(struct ixgbe_hw *hw)
+{
+	u32 setup[FW_PHY_ACT_DATA_COUNT] = { 0 };
+
+	setup[0] = FW_PHY_ACT_FORCE_LINK_DOWN_OFF;
+	return ixgbe_fw_phy_activity(hw, FW_PHY_ACT_FORCE_LINK_DOWN, &setup);
+}
+
+/**
+ * ixgbe_setup_fw_link - Setup firmware-controlled PHYs
+ * @hw: pointer to hardware structure
+ */
+static s32 ixgbe_setup_fw_link(struct ixgbe_hw *hw)
+{
+	u32 setup[FW_PHY_ACT_DATA_COUNT] = { 0 };
+	s32 rc;
+	u16 i;
+
+	if (hw->phy.reset_disable || ixgbe_check_reset_blocked(hw))
+		return 0;
+
+	if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
+		hw_err(hw, "rx_pause not valid in strict IEEE mode\n");
+		return IXGBE_ERR_INVALID_LINK_SETTINGS;
+	}
+
+	switch (hw->fc.requested_mode) {
+	case ixgbe_fc_full:
+		setup[0] |= FW_PHY_ACT_SETUP_LINK_PAUSE_RXTX <<
+			    FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT;
+		break;
+	case ixgbe_fc_rx_pause:
+		setup[0] |= FW_PHY_ACT_SETUP_LINK_PAUSE_RX <<
+			    FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT;
+		break;
+	case ixgbe_fc_tx_pause:
+		setup[0] |= FW_PHY_ACT_SETUP_LINK_PAUSE_TX <<
+			    FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT;
+		break;
+	default:
+		break;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(ixgbe_fw_map); ++i) {
+		if (hw->phy.autoneg_advertised & ixgbe_fw_map[i].phy_speed)
+			setup[0] |= ixgbe_fw_map[i].fw_speed;
+	}
+	setup[0] |= FW_PHY_ACT_SETUP_LINK_HP | FW_PHY_ACT_SETUP_LINK_AN;
+
+	if (hw->phy.eee_speeds_advertised)
+		setup[0] |= FW_PHY_ACT_SETUP_LINK_EEE;
+
+	rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_SETUP_LINK, &setup);
+	if (rc)
+		return rc;
+	if (setup[0] == FW_PHY_ACT_SETUP_LINK_RSP_DOWN)
+		return IXGBE_ERR_OVERTEMP;
+	return 0;
+}
+
+/**
+ * ixgbe_fc_autoneg_fw - Set up flow control for FW-controlled PHYs
+ * @hw: pointer to hardware structure
+ *
+ * Called at init time to set up flow control.
+ */
+static s32 ixgbe_fc_autoneg_fw(struct ixgbe_hw *hw)
+{
+	if (hw->fc.requested_mode == ixgbe_fc_default)
+		hw->fc.requested_mode = ixgbe_fc_full;
+
+	return ixgbe_setup_fw_link(hw);
+}
+
 /** ixgbe_init_eeprom_params_X550 - Initialize EEPROM params
  *  @hw: pointer to hardware structure
  *
@@ -1794,6 +1959,125 @@ ixgbe_setup_sgmii(struct ixgbe_hw *hw, __always_unused ixgbe_link_speed speed,
 	return rc;
 }
 
+/**
+ * ixgbe_setup_sgmii_fw - Set up link for sgmii with firmware-controlled PHYs
+ * @hw: pointer to hardware structure
+ */
+static s32 ixgbe_setup_sgmii_fw(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+				bool autoneg_wait)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+	u32 lval, sval, flx_val;
+	s32 rc;
+
+	rc = mac->ops.read_iosf_sb_reg(hw,
+				       IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+				       IXGBE_SB_IOSF_TARGET_KR_PHY, &lval);
+	if (rc)
+		return rc;
+
+	lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
+	lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK;
+	lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_SGMII_EN;
+	lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CLAUSE_37_EN;
+	lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G;
+	rc = mac->ops.write_iosf_sb_reg(hw,
+					IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+					IXGBE_SB_IOSF_TARGET_KR_PHY, lval);
+	if (rc)
+		return rc;
+
+	rc = mac->ops.read_iosf_sb_reg(hw,
+				       IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id),
+				       IXGBE_SB_IOSF_TARGET_KR_PHY, &sval);
+	if (rc)
+		return rc;
+
+	sval &= ~IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_10_D;
+	sval &= ~IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_100_D;
+	rc = mac->ops.write_iosf_sb_reg(hw,
+					IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id),
+					IXGBE_SB_IOSF_TARGET_KR_PHY, sval);
+	if (rc)
+		return rc;
+
+	rc = mac->ops.write_iosf_sb_reg(hw,
+					IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+					IXGBE_SB_IOSF_TARGET_KR_PHY, lval);
+	if (rc)
+		return rc;
+
+	rc = mac->ops.read_iosf_sb_reg(hw,
+				    IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				    IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_val);
+	if (rc)
+		return rc;
+
+	flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK;
+	flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_AN;
+	flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN;
+	flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN;
+	flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN;
+
+	rc = mac->ops.write_iosf_sb_reg(hw,
+				    IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				    IXGBE_SB_IOSF_TARGET_KR_PHY, flx_val);
+	if (rc)
+		return rc;
+
+	ixgbe_restart_an_internal_phy_x550em(hw);
+
+	return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait);
+}
+
+/**
+ * ixgbe_fc_autoneg_sgmii_x550em_a - Enable flow control IEEE clause 37
+ * @hw: pointer to hardware structure
+ *
+ * Enable flow control according to IEEE clause 37.
+ */
+static void ixgbe_fc_autoneg_sgmii_x550em_a(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_ERR_FC_NOT_NEGOTIATED;
+	u32 info[FW_PHY_ACT_DATA_COUNT] = { 0 };
+	ixgbe_link_speed speed;
+	bool link_up;
+
+	/* AN should have completed when the cable was plugged in.
+	 * Look for reasons to bail out.  Bail out if:
+	 * - FC autoneg is disabled, or if
+	 * - link is not up.
+	 */
+	if (hw->fc.disable_fc_autoneg)
+		goto out;
+
+	hw->mac.ops.check_link(hw, &speed, &link_up, false);
+	if (!link_up)
+		goto out;
+
+	/* Check if auto-negotiation has completed */
+	status = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_LINK_INFO, &info);
+	if (status || !(info[0] & FW_PHY_ACT_GET_LINK_INFO_AN_COMPLETE)) {
+		status = IXGBE_ERR_FC_NOT_NEGOTIATED;
+		goto out;
+	}
+
+	/* Negotiate the flow control */
+	status = ixgbe_negotiate_fc(hw, info[0], info[0],
+				    FW_PHY_ACT_GET_LINK_INFO_FC_RX,
+				    FW_PHY_ACT_GET_LINK_INFO_FC_TX,
+				    FW_PHY_ACT_GET_LINK_INFO_LP_FC_RX,
+				    FW_PHY_ACT_GET_LINK_INFO_LP_FC_TX);
+
+out:
+	if (!status) {
+		hw->fc.fc_was_autonegged = true;
+	} else {
+		hw->fc.fc_was_autonegged = false;
+		hw->fc.current_mode = hw->fc.requested_mode;
+	}
+}
+
 /** ixgbe_init_mac_link_ops_X550em_a - Init mac link function pointers
  *  @hw: pointer to hardware structure
  **/
@@ -1806,6 +2090,17 @@ static void ixgbe_init_mac_link_ops_X550em_a(struct ixgbe_hw *hw)
 		mac->ops.setup_fc = NULL;
 		mac->ops.fc_autoneg = ixgbe_fc_autoneg_fiber_x550em_a;
 		break;
+	case ixgbe_media_type_copper:
+		if (hw->device_id != IXGBE_DEV_ID_X550EM_A_1G_T &&
+		    hw->device_id != IXGBE_DEV_ID_X550EM_A_1G_T_L) {
+			mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em;
+			break;
+		}
+		mac->ops.fc_autoneg = ixgbe_fc_autoneg_sgmii_x550em_a;
+		mac->ops.setup_fc = ixgbe_fc_autoneg_fw;
+		mac->ops.setup_link = ixgbe_setup_sgmii_fw;
+		mac->ops.check_link = ixgbe_check_mac_link_generic;
+		break;
 	case ixgbe_media_type_backplane:
 		mac->ops.fc_autoneg = ixgbe_fc_autoneg_backplane_x550em_a;
 		mac->ops.setup_fc = ixgbe_setup_fc_backplane_x550em_a;
@@ -1853,7 +2148,7 @@ static void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw)
 		mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em;
 		mac->ops.setup_fc = ixgbe_setup_fc_generic;
 		mac->ops.check_link = ixgbe_check_link_t_X550em;
-		return;
+		break;
 	case ixgbe_media_type_backplane:
 		if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII ||
 		    hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII_L)
@@ -1896,6 +2191,12 @@ static s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
 					      ixgbe_link_speed *speed,
 					      bool *autoneg)
 {
+	if (hw->phy.type == ixgbe_phy_fw) {
+		*autoneg = true;
+		*speed = hw->phy.speeds_supported;
+		return 0;
+	}
+
 	/* SFP */
 	if (hw->phy.media_type == ixgbe_media_type_fiber) {
 		/* CS4227 SFP must not enable auto-negotiation */
@@ -2697,6 +2998,50 @@ static s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw)
 }
 
 /**
+ * ixgbe_reset_phy_fw - Reset firmware-controlled PHYs
+ * @hw: pointer to hardware structure
+ */
+static s32 ixgbe_reset_phy_fw(struct ixgbe_hw *hw)
+{
+	u32 store[FW_PHY_ACT_DATA_COUNT] = { 0 };
+	s32 rc;
+
+	if (hw->phy.reset_disable || ixgbe_check_reset_blocked(hw))
+		return 0;
+
+	rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_PHY_SW_RESET, &store);
+	if (rc)
+		return rc;
+	memset(store, 0, sizeof(store));
+
+	rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_INIT_PHY, &store);
+	if (rc)
+		return rc;
+
+	return ixgbe_setup_fw_link(hw);
+}
+
+/**
+ * ixgbe_check_overtemp_fw - Check firmware-controlled PHYs for overtemp
+ * @hw: pointer to hardware structure
+ */
+static s32 ixgbe_check_overtemp_fw(struct ixgbe_hw *hw)
+{
+	u32 store[FW_PHY_ACT_DATA_COUNT] = { 0 };
+	s32 rc;
+
+	rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_LINK_INFO, &store);
+	if (rc)
+		return rc;
+
+	if (store[0] & FW_PHY_ACT_GET_LINK_INFO_TEMP) {
+		ixgbe_shutdown_fw_phy(hw);
+		return IXGBE_ERR_OVERTEMP;
+	}
+	return 0;
+}
+
+/**
  * ixgbe_read_mng_if_sel_x550em - Read NW_MNG_IF_SEL register
  * @hw: pointer to hardware structure
  *
@@ -2782,6 +3127,10 @@ static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
 		phy->ops.handle_lasi = ixgbe_handle_lasi_ext_t_x550em;
 		phy->ops.reset = ixgbe_reset_phy_t_X550em;
 		break;
+	case ixgbe_phy_fw:
+		phy->ops.setup_link = ixgbe_setup_fw_link;
+		phy->ops.reset = ixgbe_reset_phy_fw;
+		break;
 	default:
 		break;
 	}
@@ -2819,6 +3168,8 @@ static enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw)
 	case IXGBE_DEV_ID_X550EM_X_1G_T:
 	case IXGBE_DEV_ID_X550EM_X_10G_T:
 	case IXGBE_DEV_ID_X550EM_A_10G_T:
+	case IXGBE_DEV_ID_X550EM_A_1G_T:
+	case IXGBE_DEV_ID_X550EM_A_1G_T_L:
 		media_type = ixgbe_media_type_copper;
 		break;
 	default:
@@ -2886,6 +3237,13 @@ static void ixgbe_set_mdio_speed(struct ixgbe_hw *hw)
 		hlreg0 &= ~IXGBE_HLREG0_MDCSPD;
 		IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
 		break;
+	case IXGBE_DEV_ID_X550EM_A_1G_T:
+	case IXGBE_DEV_ID_X550EM_A_1G_T_L:
+		/* Select fast MDIO clock speed for these devices */
+		hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
+		hlreg0 |= IXGBE_HLREG0_MDCSPD;
+		IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
+		break;
 	default:
 		break;
 	}
@@ -3426,11 +3784,11 @@ static const struct ixgbe_eeprom_operations eeprom_ops_X550EM_x = {
 	.read_i2c_eeprom	= &ixgbe_read_i2c_eeprom_generic, \
 	.write_i2c_eeprom	= &ixgbe_write_i2c_eeprom_generic, \
 	.setup_link		= &ixgbe_setup_phy_link_generic, \
-	.set_phy_power		= NULL, \
-	.check_overtemp		= &ixgbe_tn_check_overtemp,
+	.set_phy_power		= NULL,
 
 static const struct ixgbe_phy_operations phy_ops_X550 = {
 	X550_COMMON_PHY
+	.check_overtemp		= &ixgbe_tn_check_overtemp,
 	.init			= NULL,
 	.identify		= &ixgbe_identify_phy_generic,
 	.read_reg		= &ixgbe_read_phy_reg_generic,
@@ -3439,6 +3797,7 @@ static const struct ixgbe_phy_operations phy_ops_X550 = {
 
 static const struct ixgbe_phy_operations phy_ops_X550EM_x = {
 	X550_COMMON_PHY
+	.check_overtemp		= &ixgbe_tn_check_overtemp,
 	.init			= &ixgbe_init_phy_ops_X550em,
 	.identify		= &ixgbe_identify_phy_x550em,
 	.read_reg		= &ixgbe_read_phy_reg_generic,
@@ -3447,6 +3806,7 @@ static const struct ixgbe_phy_operations phy_ops_X550EM_x = {
 
 static const struct ixgbe_phy_operations phy_ops_x550em_a = {
 	X550_COMMON_PHY
+	.check_overtemp		= &ixgbe_tn_check_overtemp,
 	.init			= &ixgbe_init_phy_ops_X550em,
 	.identify		= &ixgbe_identify_phy_x550em,
 	.read_reg		= &ixgbe_read_phy_reg_x550a,
@@ -3455,6 +3815,17 @@ static const struct ixgbe_phy_operations phy_ops_x550em_a = {
 	.write_reg_mdi		= &ixgbe_write_phy_reg_mdi,
 };
 
+static const struct ixgbe_phy_operations phy_ops_x550em_a_fw = {
+	X550_COMMON_PHY
+	.check_overtemp		= ixgbe_check_overtemp_fw,
+	.init			= ixgbe_init_phy_ops_X550em,
+	.identify		= ixgbe_identify_phy_fw,
+	.read_reg		= NULL,
+	.write_reg		= NULL,
+	.read_reg_mdi		= NULL,
+	.write_reg_mdi		= NULL,
+};
+
 static const struct ixgbe_link_operations link_ops_x550em_x = {
 	.read_link		= &ixgbe_read_i2c_combined_generic,
 	.read_link_unlocked	= &ixgbe_read_i2c_combined_generic_unlocked,
@@ -3504,3 +3875,13 @@ const struct ixgbe_info ixgbe_x550em_a_info = {
 	.mbx_ops		= &mbx_ops_generic,
 	.mvals			= ixgbe_mvals_x550em_a,
 };
+
+const struct ixgbe_info ixgbe_x550em_a_fw_info = {
+	.mac			= ixgbe_mac_x550em_a,
+	.get_invariants		= ixgbe_get_invariants_X550_a_fw,
+	.mac_ops		= &mac_ops_x550em_a,
+	.eeprom_ops		= &eeprom_ops_X550EM_x,
+	.phy_ops		= &phy_ops_x550em_a_fw,
+	.mbx_ops		= &mbx_ops_generic,
+	.mvals			= ixgbe_mvals_x550em_a,
+};



More information about the Intel-wired-lan mailing list