[Intel-wired-lan] [PATCH 1/1] ixgbe: fcoe: return value of skb_linearize should be handled

[Rustad, Mark D]

Zhouyi Zhou <zhouzhouyi at gmail.com> wrote:

> diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c  
> b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
> index fee1f29..4926d48 100644
> --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
> +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
> @@ -2173,8 +2173,7 @@ static int ixgbe_clean_rx_irq(struct ixgbe_q_vector  
> *q_vector,
>  				total_rx_bytes += ddp_bytes;
>  				total_rx_packets += DIV_ROUND_UP(ddp_bytes,
>  								 mss);
> -			}
> -			if (!ddp_bytes) {
> +			} else {
>  				dev_kfree_skb_any(skb);
>  				continue;
>  			}

This is changing the logic by treating a negative ddp_bytes value (an error  
return) the same as a 0 value. This is probably wrong and inappropriate for  
this patch in any case.

--
Mark Rustad, Networking Division, Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 841 bytes
Desc: Message signed with OpenPGP using GPGMail
URL: <http://lists.osuosl.org/pipermail/intel-wired-lan/attachments/20161208/ff572904/attachment.asc>