[Intel-wired-lan] [PATCH V3 4/4] ixgbe: Implement support for firmware-controlled PHYs

[Bowers, AndrewX]

> -----Original Message-----
> From: Intel-wired-lan [mailto:intel-wired-lan-bounces at lists.osuosl.org] On
> Behalf Of Mark D Rustad
> Sent: Wednesday, December 07, 2016 2:34 PM
> To: intel-wired-lan at lists.osuosl.org
> Subject: [Intel-wired-lan] [PATCH V3 4/4] ixgbe: Implement support for
> firmware-controlled PHYs
> 
> Implement support for devices that have firmware-controlled PHYs.
> 
> Signed-off-by: Mark Rustad <mark.d.rustad at intel.com>
> ---
> Changes in V2:
> - Fixed some oversights primarily related to 10M support Changes in V3:
> - Use the correct ops to blink the LED
> ---
>  drivers/net/ethernet/intel/ixgbe/ixgbe.h         |    4
>  drivers/net/ethernet/intel/ixgbe/ixgbe_common.c  |    7
>  drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c |  156 +++++++++
>  drivers/net/ethernet/intel/ixgbe/ixgbe_main.c    |   45 +++
>  drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c     |    3
>  drivers/net/ethernet/intel/ixgbe/ixgbe_type.h    |    7
>  drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c    |  387
> ++++++++++++++++++++++
>  7 files changed, 603 insertions(+), 6 deletions(-)

Tested-by: Andrew Bowers <andrewx.bowers at intel.com>