[Intel-wired-lan] [PATCH 1/5] e1000e: Fix error path in link detection

[Benjamin Poirier]

In case of error from e1e_rphy(), the loop will exit early and "success"
will be set to true erroneously.

Signed-off-by: Benjamin Poirier <bpoirier at suse.com>
---
 drivers/net/ethernet/intel/e1000e/phy.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index d78d47b41a71..86ff0969efb6 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -1744,6 +1744,7 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
 	s32 ret_val = 0;
 	u16 i, phy_status;
 
+	*success = false;
 	for (i = 0; i < iterations; i++) {
 		/* Some PHYs require the MII_BMSR register to be read
 		 * twice due to the link bit being sticky.  No harm doing
@@ -1763,16 +1764,16 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
 		ret_val = e1e_rphy(hw, MII_BMSR, &phy_status);
 		if (ret_val)
 			break;
-		if (phy_status & BMSR_LSTATUS)
+		if (phy_status & BMSR_LSTATUS) {
+			*success = true;
 			break;
+		}
 		if (usec_interval >= 1000)
 			msleep(usec_interval / 1000);
 		else
 			udelay(usec_interval);
 	}
 
-	*success = (i < iterations);
-
 	return ret_val;
 }
 
-- 
2.13.2