[Intel-wired-lan] [RFC PATCH v3 0/6] Configuring traffic classes via new hardware offload mechanism in tc/mqprio

Shannon Nelson shannon.nelson at oracle.com
Thu Sep 7 16:45:33 UTC 2017


On 9/7/2017 4:00 AM, Amritha Nambiar wrote:
> The following series introduces a new hardware offload mode in
> tc/mqprio where the TCs, the queue configurations and
> bandwidth rate limits are offloaded to the hardware. The existing
> mqprio framework is extended to configure the queue counts and
> layout and also added support for rate limiting. This is achieved
> through new netlink attributes for the 'mode' option which takes
> values such as 'dcb' (default) and 'channel' and a 'shaper' option
> for QoS attributes such as bandwidth rate limits in hw mode 1.
> Legacy devices can fall back to the existing setup supporting hw mode
> 1 without these additional options where only the TCs are offloaded
> and then the 'mode' and 'shaper' options defaults to DCB support.
> The i40e driver enables the new mqprio hardware offload mechanism
> factoring the TCs, queue configuration and bandwidth rates by
> creating HW channel VSIs.
> 
> In this new mode, the priority to traffic class mapping and the
> user specified queue ranges are used to configure the traffic
> class when the 'mode' option is set to 'channel'. This is achieved by
> creating HW channels(VSI). A new channel is created for each of the
> traffic class configuration offloaded via mqprio framework except for
> the first TC (TC0) which is for the main VSI. TC0 for the main VSI is
> also reconfigured as per user provided queue parameters. Finally,
> bandwidth rate limits are set on these traffic classes through the
> shaper attribute by sending these rates in addition to the number of
> TCs and the queue configurations.
> 
> Example:
>      # tc qdisc add dev eth0 root mqprio num_tc 2 map 0 0 0 0 1 1 1 1\
>        queues 4 at 0 4 at 4 hw 1 mode channel shaper bw_rlimit\
>        min_rate 1Gbit 2Gbit max_rate 4Gbit 5Gbit
> 
>      To dump the bandwidth rates:
> 
>      # tc qdisc show dev eth0
> 
>      qdisc mqprio 804a: root  tc 2 map 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0
>                   queues:(0:3) (4:7)
>                   mode:channel
>                   shaper:bw_rlimit   min_rate:1Gbit 2Gbit   max_rate:4Gbit 5Gbit
> 
> ---
> 
> Amritha Nambiar (6):
>        mqprio: Introduce new hardware offload mode and shaper in mqprio
>        i40e: Add macro for PF reset bit
>        i40e: Add infrastructure for queue channel support
>        i40e: Enable 'channel' mode in mqprio for TC configs
>        i40e: Refactor VF BW rate limiting
>        i40e: Add support setting TC max bandwidth rates
> 

It would be nice to know what has changed since the last review, either 
summarized here or in the individual patch files.  This helps in knowing 
how much attention should be given to this new set of patches, and 
encourages further review.  I don't remember seeing any responses to my 
previous comments, and it looks like not all of them were acted upon.

sln

> 
>   drivers/net/ethernet/intel/i40e/i40e.h             |   44 +
>   drivers/net/ethernet/intel/i40e/i40e_debugfs.c     |    3
>   drivers/net/ethernet/intel/i40e/i40e_ethtool.c     |    8
>   drivers/net/ethernet/intel/i40e/i40e_main.c        | 1463 +++++++++++++++++---
>   drivers/net/ethernet/intel/i40e/i40e_txrx.h        |    2
>   drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c |   50 -
>   include/net/pkt_cls.h                              |    9
>   include/uapi/linux/pkt_sched.h                     |   32
>   net/sched/sch_mqprio.c                             |  183 ++-
>   9 files changed, 1551 insertions(+), 243 deletions(-)
> 
> --
> _______________________________________________
> Intel-wired-lan mailing list
> Intel-wired-lan at osuosl.org
> https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
> 


More information about the Intel-wired-lan mailing list