[Intel-wired-lan] [RFC net-next 0/5] TSN: Add qdisc-based config interfaces for traffic shapers

Richard Cochran richardcochran at gmail.com
Tue Sep 12 04:56:44 UTC 2017


On Thu, Sep 07, 2017 at 06:29:00PM -0700, Vinicius Costa Gomes wrote:
> >>  * Time-aware shaper (802.1Qbv):
> >>
> >>    The idea we are currently exploring is to add a "time-aware", priority based
> >>    qdisc, that also exposes the Tx queues available and provides a mechanism for
> >>    mapping priority <-> traffic class <-> Tx queues in a similar fashion as
> >>    mqprio. We are calling this qdisc 'taprio', and its 'tc' cmd line would be:
> >
> > As far as I know, this is not supported by i210, and if time-aware shaping
> > is enabled in the network - you'll be queued on a bridge until the window
> > opens as time-aware shaping is enforced on the tx-port and not on rx. Is
> > this required in this driver?
> 
> Yeah, i210 doesn't support the time-aware shaper. I think the second
> part of your question doesn't really apply, then.

Actually, you can implement 802.1Qbv (as an end station) quite easily
using the i210.  I'll show how by posting a series after net-next
opens up again.

Thanks,
Richard


More information about the Intel-wired-lan mailing list