[Intel-wired-lan] [jkirsher/next-queue PATCH 2/5] fm10k: Fix VLAN configuration for macvlan offload
Alexander Duyck
alexander.duyck at gmail.com
Wed Nov 8 23:03:44 UTC 2017
On Wed, Nov 8, 2017 at 2:05 PM, Keller, Jacob E
<jacob.e.keller at intel.com> wrote:
>> -----Original Message-----
>> From: Intel-wired-lan [mailto:intel-wired-lan-bounces at osuosl.org] On Behalf Of
>> Jesse Brandeburg
>> Sent: Friday, November 03, 2017 10:06 AM
>> To: Alexander Duyck <alexander.duyck at gmail.com>
>> Cc: netdev at vger.kernel.org; intel-wired-lan at lists.osuosl.org
>> Subject: Re: [Intel-wired-lan] [jkirsher/next-queue PATCH 2/5] fm10k: Fix VLAN
>> configuration for macvlan offload
>>
>> On Thu, 2 Nov 2017 16:33:45 -0700
>> Alexander Duyck <alexander.duyck at gmail.com> wrote:
>>
>> > From: Alexander Duyck <alexander.h.duyck at intel.com>
>> >
>> > The fm10k driver didn't work correctly when macvlan offload was enabled.
>> > Specifically what would occur is that we would see no unicast packets being
>> > received. This was traced down to us not correctly configuring the default
>> > VLAN ID for the port and defaulting to 0.
>> >
>> > To correct this we either use the default ID provided by the switch or
>> > simply use 1. With that we are able to pass and receive traffic without any
>> > issues.
>>
>> Reviewed-by: Jesse Brandeburg <jesse.brandeburg at intel.com>
>>
>
> Hi,
>
> I think this isn't quite right, since we recently made changes to the fm10k code to stop assuming VLAN 1 in these cases. I believe it should just pass the default_vid
>
> Thanks,
> Jake
>
I kind of figured that might be the case. We can probably drop this
patch for now and if you want you can work this from our end as the
out-of-tree code doesn't make the upstream and I would imagine you
guys are planning to upstream that patch at some point.
- Alex
More information about the Intel-wired-lan
mailing list