[Intel-wired-lan] [PATCH 1/3] e1000e: Set HTHRESH when PTHRESH is used
Neftin, Sasha
sasha.neftin at intel.com
Thu Nov 9 07:04:01 UTC 2017
On 11/8/2017 00:13, Matt Turner wrote:
> From: Matt Turner <matt.turner at intel.com>
>
> According to section 12.0.3.4.13 "Receive Descriptor Control - RXDCTL"
> of the Intel® 82579 Gigabit Ethernet PHY Datasheet v2.1:
>
> "HTHRESH should be given a non zero value when ever PTHRESH is
> used."
>
> In RXDCTL(0), PTHRESH lives at bits 5:0, and HTHREST lives at bits 13:8.
> Set only bit 8 of HTHREST as is done in e1000_flush_rx_ring(). Found by
> inspection.
>
> Signed-off-by: Matt Turner <matt.turner at intel.com>
> ---
> drivers/net/ethernet/intel/e1000e/netdev.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
> index 2dcb5463d9b8..286d0277284e 100644
> --- a/drivers/net/ethernet/intel/e1000e/netdev.c
> +++ b/drivers/net/ethernet/intel/e1000e/netdev.c
> @@ -3285,7 +3285,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
> if (adapter->flags & FLAG_IS_ICH) {
> u32 rxdctl = er32(RXDCTL(0));
>
> - ew32(RXDCTL(0), rxdctl | 0x3);
> + ew32(RXDCTL(0), rxdctl | 0x3 | BIT(8));
> }
>
> pm_qos_update_request(&adapter->pm_qos_req, lat);
Ack. Good point.
More information about the Intel-wired-lan
mailing list