[Intel-wired-lan] [PATCH V2] i40e: i40e_open() should fail if forcing link state returned error
Alice Michael
alice.michael at intel.com
Fri Feb 2 11:10:47 UTC 2018
From: Mariusz Stachura <mariusz.stachura at intel.com>
Based on upstream review comments, ndo_open function should not succeed
if there were issues with forcing link state to be UP.
This patch also fixes an issue with looping through enum values.
Added I40E_PHY_TYPES_BITMASK define with all phy types OR-ed together in
one bitmask. Added after phy type definition, so it will be hard to
forget to include new phy types to the bitmask.
Signed-off-by: Mariusz Stachura <mariusz.stachura at intel.com>
---
drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h | 37 +++++++++++++++++++++++
drivers/net/ethernet/intel/i40e/i40e_main.c | 28 +++++++++--------
2 files changed, 53 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
index a852775..0dfc527 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
@@ -1914,6 +1914,43 @@ enum i40e_aq_phy_type {
I40E_PHY_TYPE_DEFAULT = 0xFF,
};
+#define I40E_PHY_TYPES_BITMASK (BIT_ULL(I40E_PHY_TYPE_SGMII) | \
+ BIT_ULL(I40E_PHY_TYPE_1000BASE_KX) | \
+ BIT_ULL(I40E_PHY_TYPE_10GBASE_KX4) | \
+ BIT_ULL(I40E_PHY_TYPE_10GBASE_KR) | \
+ BIT_ULL(I40E_PHY_TYPE_40GBASE_KR4) | \
+ BIT_ULL(I40E_PHY_TYPE_XAUI) | \
+ BIT_ULL(I40E_PHY_TYPE_XFI) | \
+ BIT_ULL(I40E_PHY_TYPE_SFI) | \
+ BIT_ULL(I40E_PHY_TYPE_XLAUI) | \
+ BIT_ULL(I40E_PHY_TYPE_XLPPI) | \
+ BIT_ULL(I40E_PHY_TYPE_40GBASE_CR4_CU) | \
+ BIT_ULL(I40E_PHY_TYPE_10GBASE_CR1_CU) | \
+ BIT_ULL(I40E_PHY_TYPE_10GBASE_AOC) | \
+ BIT_ULL(I40E_PHY_TYPE_40GBASE_AOC) | \
+ BIT_ULL(I40E_PHY_TYPE_UNRECOGNIZED) | \
+ BIT_ULL(I40E_PHY_TYPE_UNSUPPORTED) | \
+ BIT_ULL(I40E_PHY_TYPE_100BASE_TX) | \
+ BIT_ULL(I40E_PHY_TYPE_1000BASE_T) | \
+ BIT_ULL(I40E_PHY_TYPE_10GBASE_T) | \
+ BIT_ULL(I40E_PHY_TYPE_10GBASE_SR) | \
+ BIT_ULL(I40E_PHY_TYPE_10GBASE_LR) | \
+ BIT_ULL(I40E_PHY_TYPE_10GBASE_SFPP_CU) | \
+ BIT_ULL(I40E_PHY_TYPE_10GBASE_CR1) | \
+ BIT_ULL(I40E_PHY_TYPE_40GBASE_CR4) | \
+ BIT_ULL(I40E_PHY_TYPE_40GBASE_SR4) | \
+ BIT_ULL(I40E_PHY_TYPE_40GBASE_LR4) | \
+ BIT_ULL(I40E_PHY_TYPE_1000BASE_SX) | \
+ BIT_ULL(I40E_PHY_TYPE_1000BASE_LX) | \
+ BIT_ULL(I40E_PHY_TYPE_1000BASE_T_OPTICAL) | \
+ BIT_ULL(I40E_PHY_TYPE_20GBASE_KR2) | \
+ BIT_ULL(I40E_PHY_TYPE_25GBASE_KR) | \
+ BIT_ULL(I40E_PHY_TYPE_25GBASE_CR) | \
+ BIT_ULL(I40E_PHY_TYPE_25GBASE_SR) | \
+ BIT_ULL(I40E_PHY_TYPE_25GBASE_LR) | \
+ BIT_ULL(I40E_PHY_TYPE_25GBASE_AOC) | \
+ BIT_ULL(I40E_PHY_TYPE_25GBASE_ACC))
+
#define I40E_LINK_SPEED_100MB_SHIFT 0x1
#define I40E_LINK_SPEED_1000MB_SHIFT 0x2
#define I40E_LINK_SPEED_10GB_SHIFT 0x3
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index fd90ae5..be9a146 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -6551,37 +6551,36 @@ int i40e_up(struct i40e_vsi *vsi)
* @pf: board private structure
* @is_up: whether the link state should be forced up or down
**/
-static void i40e_force_link_state(struct i40e_pf *pf, bool is_up)
+static i40e_status i40e_force_link_state(struct i40e_pf *pf, bool is_up)
{
struct i40e_aq_get_phy_abilities_resp abilities;
struct i40e_aq_set_phy_config config = {0};
struct i40e_hw *hw = &pf->hw;
- enum i40e_aq_phy_type cnt;
- u64 mask = 0;
i40e_status err;
+ u64 mask;
/* Get the current phy config */
err = i40e_aq_get_phy_capabilities(hw, false, false, &abilities,
NULL);
- if (err)
- dev_dbg(&pf->pdev->dev,
+ if (err) {
+ dev_err(&pf->pdev->dev,
"failed to get phy cap., ret = %s last_status = %s\n",
i40e_stat_str(hw, err),
i40e_aq_str(hw, hw->aq.asq_last_status));
+ return err;
+ }
/* If link needs to go up, but was not forced to go down,
* no need for a flap
*/
if (is_up && abilities.phy_type != 0)
- return;
+ return I40E_SUCCESS;
/* To force link we need to set bits for all supported PHY types,
* but there are now more than 32, so we need to split the bitmap
* across two fields.
*/
- for (cnt = I40E_PHY_TYPE_SGMII; cnt < I40E_PHY_TYPE_MAX; cnt++)
- mask |= (1ULL << cnt);
-
+ mask = I40E_PHY_TYPES_BITMASK;
config.phy_type = is_up ? cpu_to_le32((u32)(mask & 0xffffffff)) : 0;
config.phy_type_ext = is_up ? (u8)((mask >> 32) & 0xff) : 0;
/* Copy the old settings, except of phy_type */
@@ -6592,11 +6591,13 @@ static void i40e_force_link_state(struct i40e_pf *pf, bool is_up)
config.low_power_ctrl = abilities.d3_lpan;
err = i40e_aq_set_phy_config(hw, &config, NULL);
- if (err)
- dev_dbg(&pf->pdev->dev,
+ if (err) {
+ dev_err(&pf->pdev->dev,
"set phy config ret = %s last_status = %s\n",
i40e_stat_str(&pf->hw, err),
i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
+ return err;
+ }
/* Update the link info */
err = i40e_update_link_info(hw);
@@ -6610,6 +6611,8 @@ static void i40e_force_link_state(struct i40e_pf *pf, bool is_up)
}
i40e_aq_set_link_restart_an(hw, true, NULL);
+
+ return I40E_SUCCESS;
}
/**
@@ -7593,7 +7596,8 @@ int i40e_open(struct net_device *netdev)
netif_carrier_off(netdev);
- i40e_force_link_state(pf, true);
+ if (i40e_force_link_state(pf, true))
+ return -EAGAIN;
err = i40e_vsi_open(vsi);
if (err)
--
2.9.5
More information about the Intel-wired-lan
mailing list