[Intel-wired-lan] [PATCH v4 10/15] ice: Implement transmit and NAPI support

Anirudh Venkataramanan anirudh.venkataramanan at intel.com
Tue Mar 20 14:58:14 UTC 2018


This patch implements ice_start_xmit (the handler for ndo_start_xmit) and
related functions. ice_start_xmit ultimately calls ice_tx_map, where the
Tx descriptor is built and posted to the hardware by bumping the ring tail.

This patch also implements ice_napi_poll, which is invoked when there's an
interrupt on the VSI's queues. The interrupt can be due to either a
completed Tx or an Rx event. In case of a completed Tx/Rx event, resources
are reclaimed. Additionally, in case of an Rx event, the skb is fetched
and passed up to the network stack.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan at intel.com>
---
 drivers/net/ethernet/intel/ice/ice.h           |    1 +
 drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h |   46 ++
 drivers/net/ethernet/intel/ice/ice_main.c      |   55 ++
 drivers/net/ethernet/intel/ice/ice_txrx.c      | 1026 +++++++++++++++++++++++-
 drivers/net/ethernet/intel/ice/ice_txrx.h      |   45 ++
 5 files changed, 1171 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
index e3ec19099e37..7998e57994bf 100644
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@ -74,6 +74,7 @@
 		(((val) << ICE_AQ_VSI_UP_TABLE_UP##i##_S) & \
 		  ICE_AQ_VSI_UP_TABLE_UP##i##_M)
 
+#define ICE_TX_DESC(R, i) (&(((struct ice_tx_desc *)((R)->desc))[i]))
 #define ICE_RX_DESC(R, i) (&(((union ice_32b_rx_flex_desc *)((R)->desc))[i]))
 
 #define ice_for_each_txq(vsi, i) \
diff --git a/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h b/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h
index 0cdf1ae480cf..c930f3e06ecc 100644
--- a/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h
+++ b/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h
@@ -145,6 +145,33 @@ enum ice_rx_flg64_bits {
 	ICE_RXFLG_RSVD		= 63
 };
 
+/* for ice_32byte_rx_flex_desc.ptype_flexi_flags0 member */
+#define ICE_RX_FLEX_DESC_PTYPE_M	(0x3FF) /* 10-bits */
+
+/* for ice_32byte_rx_flex_desc.pkt_length member */
+#define ICE_RX_FLX_DESC_PKT_LEN_M	(0x3FFF) /* 14-bits */
+
+enum ice_rx_flex_desc_status_error_0_bits {
+	/* Note: These are predefined bit offsets */
+	ICE_RX_FLEX_DESC_STATUS0_DD_S = 0,
+	ICE_RX_FLEX_DESC_STATUS0_EOF_S,
+	ICE_RX_FLEX_DESC_STATUS0_HBO_S,
+	ICE_RX_FLEX_DESC_STATUS0_L3L4P_S,
+	ICE_RX_FLEX_DESC_STATUS0_XSUM_IPE_S,
+	ICE_RX_FLEX_DESC_STATUS0_XSUM_L4E_S,
+	ICE_RX_FLEX_DESC_STATUS0_XSUM_EIPE_S,
+	ICE_RX_FLEX_DESC_STATUS0_XSUM_EUDPE_S,
+	ICE_RX_FLEX_DESC_STATUS0_LPBK_S,
+	ICE_RX_FLEX_DESC_STATUS0_IPV6EXADD_S,
+	ICE_RX_FLEX_DESC_STATUS0_RXE_S,
+	ICE_RX_FLEX_DESC_STATUS0_CRCP_S,
+	ICE_RX_FLEX_DESC_STATUS0_RSS_VALID_S,
+	ICE_RX_FLEX_DESC_STATUS0_L2TAG1P_S,
+	ICE_RX_FLEX_DESC_STATUS0_XTRMD0_VALID_S,
+	ICE_RX_FLEX_DESC_STATUS0_XTRMD1_VALID_S,
+	ICE_RX_FLEX_DESC_STATUS0_LAST /* this entry must be last!!! */
+};
+
 #define ICE_RXQ_CTX_SIZE_DWORDS		8
 #define ICE_RXQ_CTX_SZ			(ICE_RXQ_CTX_SIZE_DWORDS * sizeof(u32))
 
@@ -215,6 +242,25 @@ struct ice_tx_desc {
 	__le64 cmd_type_offset_bsz;
 };
 
+enum ice_tx_desc_dtype_value {
+	ICE_TX_DESC_DTYPE_DATA		= 0x0,
+	ICE_TX_DESC_DTYPE_CTX		= 0x1,
+	/* DESC_DONE - HW has completed write-back of descriptor */
+	ICE_TX_DESC_DTYPE_DESC_DONE	= 0xF,
+};
+
+#define ICE_TXD_QW1_CMD_S	4
+#define ICE_TXD_QW1_CMD_M	(0xFFFUL << ICE_TXD_QW1_CMD_S)
+
+enum ice_tx_desc_cmd_bits {
+	ICE_TX_DESC_CMD_EOP			= 0x0001,
+	ICE_TX_DESC_CMD_RS			= 0x0002,
+};
+
+#define ICE_TXD_QW1_OFFSET_S	16
+#define ICE_TXD_QW1_TX_BUF_SZ_S	34
+#define ICE_TXD_QW1_L2TAG1_S	48
+
 #define ICE_LAN_TXQ_MAX_QGRPS	127
 #define ICE_LAN_TXQ_MAX_QDIS	1023
 
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index afb400a1f1d2..b802cac8376c 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -1272,6 +1272,23 @@ static int ice_vsi_alloc_arrays(struct ice_vsi *vsi, bool alloc_qvectors)
 	return -ENOMEM;
 }
 
+/**
+ * ice_msix_clean_rings - MSIX mode Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a q_vector
+ */
+static irqreturn_t ice_msix_clean_rings(int __always_unused irq, void *data)
+{
+	struct ice_q_vector *q_vector = (struct ice_q_vector *)data;
+
+	if (!q_vector->tx.ring && !q_vector->rx.ring)
+		return IRQ_HANDLED;
+
+	napi_schedule(&q_vector->napi);
+
+	return IRQ_HANDLED;
+}
+
 /**
  * ice_vsi_alloc - Allocates the next available struct vsi in the PF
  * @pf: board private structure
@@ -1312,6 +1329,8 @@ static struct ice_vsi *ice_vsi_alloc(struct ice_pf *pf, enum ice_vsi_type type)
 		if (ice_vsi_alloc_arrays(vsi, true))
 			goto err_rings;
 
+		/* Setup default MSIX irq handler for VSI */
+		vsi->irq_handler = ice_msix_clean_rings;
 		break;
 	default:
 		dev_warn(&pf->pdev->dev, "Unknown VSI type %d\n", vsi->type);
@@ -1755,6 +1774,9 @@ static int ice_vsi_alloc_q_vector(struct ice_vsi *vsi, int v_idx)
 	if (cpu_online(v_idx))
 		cpumask_set_cpu(v_idx, &q_vector->affinity_mask);
 
+	if (vsi->netdev)
+		netif_napi_add(vsi->netdev, &q_vector->napi, ice_napi_poll,
+			       NAPI_POLL_WEIGHT);
 	/* tie q_vector and vsi together */
 	vsi->q_vectors[v_idx] = q_vector;
 
@@ -2928,6 +2950,21 @@ static int ice_vsi_stop_tx_rx_rings(struct ice_vsi *vsi)
 	return 0;
 }
 
+/**
+ * ice_napi_enable_all - Enable NAPI for all q_vectors in the VSI
+ * @vsi: the VSI being configured
+ */
+static void ice_napi_enable_all(struct ice_vsi *vsi)
+{
+	int q_idx;
+
+	if (!vsi->netdev)
+		return;
+
+	for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++)
+		napi_enable(&vsi->q_vectors[q_idx]->napi);
+}
+
 /**
  * ice_up_complete - Finish the last steps of bringing up a connection
  * @vsi: The VSI being configured
@@ -2953,6 +2990,7 @@ static int ice_up_complete(struct ice_vsi *vsi)
 		return err;
 
 	clear_bit(__ICE_DOWN, vsi->state);
+	ice_napi_enable_all(vsi);
 	ice_vsi_ena_irq(vsi);
 
 	if (vsi->port_info &&
@@ -2968,6 +3006,21 @@ static int ice_up_complete(struct ice_vsi *vsi)
 	return err;
 }
 
+/**
+ * ice_napi_disable_all - Disable NAPI for all q_vectors in the VSI
+ * @vsi: VSI having NAPI disabled
+ */
+static void ice_napi_disable_all(struct ice_vsi *vsi)
+{
+	int q_idx;
+
+	if (!vsi->netdev)
+		return;
+
+	for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++)
+		napi_disable(&vsi->q_vectors[q_idx]->napi);
+}
+
 /**
  * ice_down - Shutdown the connection
  * @vsi: The VSI being stopped
@@ -2986,6 +3039,7 @@ static int ice_down(struct ice_vsi *vsi)
 
 	ice_vsi_dis_irq(vsi);
 	err = ice_vsi_stop_tx_rx_rings(vsi);
+	ice_napi_disable_all(vsi);
 
 	ice_for_each_txq(vsi, i)
 		ice_clean_tx_ring(vsi->tx_rings[i]);
@@ -3265,4 +3319,5 @@ static int ice_stop(struct net_device *netdev)
 static const struct net_device_ops ice_netdev_ops = {
 	.ndo_open = ice_open,
 	.ndo_stop = ice_stop,
+	.ndo_start_xmit = ice_start_xmit,
 };
diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.c b/drivers/net/ethernet/intel/ice/ice_txrx.c
index 002c26a4bca6..5775cdde57e3 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx.c
+++ b/drivers/net/ethernet/intel/ice/ice_txrx.c
@@ -21,6 +21,8 @@
 #include <linux/mm.h>
 #include "ice.h"
 
+#define ICE_RX_HDR_SIZE		256
+
 /**
  * ice_unmap_and_free_tx_buf - Release a Tx buffer
  * @ring: the ring that owns the buffer
@@ -106,6 +108,129 @@ void ice_free_tx_ring(struct ice_ring *tx_ring)
 	}
 }
 
+/**
+ * ice_clean_tx_irq - Reclaim resources after transmit completes
+ * @vsi: the VSI we care about
+ * @tx_ring: Tx ring to clean
+ * @napi_budget: Used to determine if we are in netpoll
+ *
+ * Returns true if there's any budget left (e.g. the clean is finished)
+ */
+static bool ice_clean_tx_irq(struct ice_vsi *vsi, struct ice_ring *tx_ring,
+			     int napi_budget)
+{
+	unsigned int total_bytes = 0, total_pkts = 0;
+	unsigned int budget = vsi->work_lmt;
+	s16 i = tx_ring->next_to_clean;
+	struct ice_tx_desc *tx_desc;
+	struct ice_tx_buf *tx_buf;
+
+	tx_buf = &tx_ring->tx_buf[i];
+	tx_desc = ICE_TX_DESC(tx_ring, i);
+	i -= tx_ring->count;
+
+	do {
+		struct ice_tx_desc *eop_desc = tx_buf->next_to_watch;
+
+		/* if next_to_watch is not set then there is no work pending */
+		if (!eop_desc)
+			break;
+
+		smp_rmb();	/* prevent any other reads prior to eop_desc */
+
+		/* if the descriptor isn't done, no work yet to do */
+		if (!(eop_desc->cmd_type_offset_bsz &
+		      cpu_to_le64(ICE_TX_DESC_DTYPE_DESC_DONE)))
+			break;
+
+		/* clear next_to_watch to prevent false hangs */
+		tx_buf->next_to_watch = NULL;
+
+		/* update the statistics for this packet */
+		total_bytes += tx_buf->bytecount;
+		total_pkts += tx_buf->gso_segs;
+
+		/* free the skb */
+		napi_consume_skb(tx_buf->skb, napi_budget);
+
+		/* unmap skb header data */
+		dma_unmap_single(tx_ring->dev,
+				 dma_unmap_addr(tx_buf, dma),
+				 dma_unmap_len(tx_buf, len),
+				 DMA_TO_DEVICE);
+
+		/* clear tx_buf data */
+		tx_buf->skb = NULL;
+		dma_unmap_len_set(tx_buf, len, 0);
+
+		/* unmap remaining buffers */
+		while (tx_desc != eop_desc) {
+			tx_buf++;
+			tx_desc++;
+			i++;
+			if (unlikely(!i)) {
+				i -= tx_ring->count;
+				tx_buf = tx_ring->tx_buf;
+				tx_desc = ICE_TX_DESC(tx_ring, 0);
+			}
+
+			/* unmap any remaining paged data */
+			if (dma_unmap_len(tx_buf, len)) {
+				dma_unmap_page(tx_ring->dev,
+					       dma_unmap_addr(tx_buf, dma),
+					       dma_unmap_len(tx_buf, len),
+					       DMA_TO_DEVICE);
+				dma_unmap_len_set(tx_buf, len, 0);
+			}
+		}
+
+		/* move us one more past the eop_desc for start of next pkt */
+		tx_buf++;
+		tx_desc++;
+		i++;
+		if (unlikely(!i)) {
+			i -= tx_ring->count;
+			tx_buf = tx_ring->tx_buf;
+			tx_desc = ICE_TX_DESC(tx_ring, 0);
+		}
+
+		prefetch(tx_desc);
+
+		/* update budget accounting */
+		budget--;
+	} while (likely(budget));
+
+	i += tx_ring->count;
+	tx_ring->next_to_clean = i;
+	u64_stats_update_begin(&tx_ring->syncp);
+	tx_ring->stats.bytes += total_bytes;
+	tx_ring->stats.pkts += total_pkts;
+	u64_stats_update_end(&tx_ring->syncp);
+	tx_ring->q_vector->tx.total_bytes += total_bytes;
+	tx_ring->q_vector->tx.total_pkts += total_pkts;
+
+	netdev_tx_completed_queue(txring_txq(tx_ring), total_pkts,
+				  total_bytes);
+
+#define TX_WAKE_THRESHOLD ((s16)(DESC_NEEDED * 2))
+	if (unlikely(total_pkts && netif_carrier_ok(tx_ring->netdev) &&
+		     (ICE_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD))) {
+		/* Make sure that anybody stopping the queue after this
+		 * sees the new next_to_clean.
+		 */
+		smp_mb();
+		if (__netif_subqueue_stopped(tx_ring->netdev,
+					     tx_ring->q_index) &&
+		   !test_bit(__ICE_DOWN, vsi->state)) {
+			netif_wake_subqueue(tx_ring->netdev,
+					    tx_ring->q_index);
+			++tx_ring->tx_stats.restart_q;
+		}
+	}
+
+	return !!budget;
+}
+
 /**
  * ice_setup_tx_ring - Allocate the Tx descriptors
  * @tx_ring: the tx ring to set up
@@ -288,13 +413,17 @@ static bool ice_alloc_mapped_page(struct ice_ring *rx_ring,
 	dma_addr_t dma;
 
 	/* since we are recycling buffers we should seldom need to alloc */
-	if (likely(page))
+	if (likely(page)) {
+		rx_ring->rx_stats.page_reuse_count++;
 		return true;
+	}
 
 	/* alloc new page for storage */
 	page = alloc_page(GFP_ATOMIC | __GFP_NOWARN);
-	if (unlikely(!page))
+	if (unlikely(!page)) {
+		rx_ring->rx_stats.alloc_page_failed++;
 		return false;
+	}
 
 	/* map page for use */
 	dma = dma_map_page(rx_ring->dev, page, 0, PAGE_SIZE, DMA_FROM_DEVICE);
@@ -304,6 +433,7 @@ static bool ice_alloc_mapped_page(struct ice_ring *rx_ring,
 	 */
 	if (dma_mapping_error(rx_ring->dev, dma)) {
 		__free_pages(page, 0);
+		rx_ring->rx_stats.alloc_page_failed++;
 		return false;
 	}
 
@@ -373,3 +503,895 @@ bool ice_alloc_rx_bufs(struct ice_ring *rx_ring, u16 cleaned_count)
 	 */
 	return true;
 }
+
+/**
+ * ice_page_is_reserved - check if reuse is possible
+ * @page: page struct to check
+ */
+static bool ice_page_is_reserved(struct page *page)
+{
+	return (page_to_nid(page) != numa_mem_id()) || page_is_pfmemalloc(page);
+}
+
+/**
+ * ice_add_rx_frag - Add contents of Rx buffer to sk_buff
+ * @rx_buf: buffer containing page to add
+ * @rx_desc: descriptor containing length of buffer written by hardware
+ * @skb: sk_buf to place the data into
+ *
+ * This function will add the data contained in rx_buf->page to the skb.
+ * This is done either through a direct copy if the data in the buffer is
+ * less than the skb header size, otherwise it will just attach the page as
+ * a frag to the skb.
+ *
+ * The function will then update the page offset if necessary and return
+ * true if the buffer can be reused by the adapter.
+ */
+static bool ice_add_rx_frag(struct ice_rx_buf *rx_buf,
+			    union ice_32b_rx_flex_desc *rx_desc,
+			    struct sk_buff *skb)
+{
+#if (PAGE_SIZE < 8192)
+	unsigned int truesize = ICE_RXBUF_2048;
+#else
+	unsigned int last_offset = PAGE_SIZE - ICE_RXBUF_2048;
+	unsigned int truesize;
+#endif /* PAGE_SIZE < 8192) */
+
+	struct page *page;
+	unsigned int size;
+
+	size = le16_to_cpu(rx_desc->wb.pkt_len) &
+		ICE_RX_FLX_DESC_PKT_LEN_M;
+
+	page = rx_buf->page;
+
+#if (PAGE_SIZE >= 8192)
+	truesize = ALIGN(size, L1_CACHE_BYTES);
+#endif /* PAGE_SIZE >= 8192) */
+
+	/* will the data fit in the skb we allocated? if so, just
+	 * copy it as it is pretty small anyway
+	 */
+	if (size <= ICE_RX_HDR_SIZE && !skb_is_nonlinear(skb)) {
+		unsigned char *va = page_address(page) + rx_buf->page_offset;
+
+		memcpy(__skb_put(skb, size), va, ALIGN(size, sizeof(long)));
+
+		/* page is not reserved, we can reuse buffer as-is */
+		if (likely(!ice_page_is_reserved(page)))
+			return true;
+
+		/* this page cannot be reused so discard it */
+		__free_pages(page, 0);
+		return false;
+	}
+
+	skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
+			rx_buf->page_offset, size, truesize);
+
+	/* avoid re-using remote pages */
+	if (unlikely(ice_page_is_reserved(page)))
+		return false;
+
+#if (PAGE_SIZE < 8192)
+	/* if we are only owner of page we can reuse it */
+	if (unlikely(page_count(page) != 1))
+		return false;
+
+	/* flip page offset to other buffer */
+	rx_buf->page_offset ^= truesize;
+#else
+	/* move offset up to the next cache line */
+	rx_buf->page_offset += truesize;
+
+	if (rx_buf->page_offset > last_offset)
+		return false;
+#endif /* PAGE_SIZE < 8192) */
+
+	/* Even if we own the page, we are not allowed to use atomic_set()
+	 * This would break get_page_unless_zero() users.
+	 */
+	get_page(rx_buf->page);
+
+	return true;
+}
+
+/**
+ * ice_reuse_rx_page - page flip buffer and store it back on the ring
+ * @rx_ring: rx descriptor ring to store buffers on
+ * @old_buf: donor buffer to have page reused
+ *
+ * Synchronizes page for reuse by the adapter
+ */
+static void ice_reuse_rx_page(struct ice_ring *rx_ring,
+			      struct ice_rx_buf *old_buf)
+{
+	u16 nta = rx_ring->next_to_alloc;
+	struct ice_rx_buf *new_buf;
+
+	new_buf = &rx_ring->rx_buf[nta];
+
+	/* update, and store next to alloc */
+	nta++;
+	rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0;
+
+	/* transfer page from old buffer to new buffer */
+	*new_buf = *old_buf;
+}
+
+/**
+ * ice_fetch_rx_buf - Allocate skb and populate it
+ * @rx_ring: rx descriptor ring to transact packets on
+ * @rx_desc: descriptor containing info written by hardware
+ *
+ * This function allocates an skb on the fly, and populates it with the page
+ * data from the current receive descriptor, taking care to set up the skb
+ * correctly, as well as handling calling the page recycle function if
+ * necessary.
+ */
+static struct sk_buff *ice_fetch_rx_buf(struct ice_ring *rx_ring,
+					union ice_32b_rx_flex_desc *rx_desc)
+{
+	struct ice_rx_buf *rx_buf;
+	struct sk_buff *skb;
+	struct page *page;
+
+	rx_buf = &rx_ring->rx_buf[rx_ring->next_to_clean];
+	page = rx_buf->page;
+	prefetchw(page);
+
+	skb = rx_buf->skb;
+
+	if (likely(!skb)) {
+		u8 *page_addr = page_address(page) + rx_buf->page_offset;
+
+		/* prefetch first cache line of first page */
+		prefetch(page_addr);
+#if L1_CACHE_BYTES < 128
+		prefetch((void *)(page_addr + L1_CACHE_BYTES));
+#endif /* L1_CACHE_BYTES */
+
+		/* allocate a skb to store the frags */
+		skb = __napi_alloc_skb(&rx_ring->q_vector->napi,
+				       ICE_RX_HDR_SIZE,
+				       GFP_ATOMIC | __GFP_NOWARN);
+		if (unlikely(!skb)) {
+			rx_ring->rx_stats.alloc_buf_failed++;
+			return NULL;
+		}
+
+		/* we will be copying header into skb->data in
+		 * pskb_may_pull so it is in our interest to prefetch
+		 * it now to avoid a possible cache miss
+		 */
+		prefetchw(skb->data);
+
+		skb_record_rx_queue(skb, rx_ring->q_index);
+	} else {
+		/* we are reusing so sync this buffer for CPU use */
+		dma_sync_single_range_for_cpu(rx_ring->dev, rx_buf->dma,
+					      rx_buf->page_offset,
+					      ICE_RXBUF_2048,
+					      DMA_FROM_DEVICE);
+
+		rx_buf->skb = NULL;
+	}
+
+	/* pull page into skb */
+	if (ice_add_rx_frag(rx_buf, rx_desc, skb)) {
+		/* hand second half of page back to the ring */
+		ice_reuse_rx_page(rx_ring, rx_buf);
+		rx_ring->rx_stats.page_reuse_count++;
+	} else {
+		/* we are not reusing the buffer so unmap it */
+		dma_unmap_page(rx_ring->dev, rx_buf->dma, PAGE_SIZE,
+			       DMA_FROM_DEVICE);
+	}
+
+	/* clear contents of buffer_info */
+	rx_buf->page = NULL;
+
+	return skb;
+}
+
+/**
+ * ice_pull_tail - ice specific version of skb_pull_tail
+ * @skb: pointer to current skb being adjusted
+ *
+ * This function is an ice specific version of __pskb_pull_tail.  The
+ * main difference between this version and the original function is that
+ * this function can make several assumptions about the state of things
+ * that allow for significant optimizations versus the standard function.
+ * As a result we can do things like drop a frag and maintain an accurate
+ * truesize for the skb.
+ */
+static void ice_pull_tail(struct sk_buff *skb)
+{
+	struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0];
+	unsigned int pull_len;
+	unsigned char *va;
+
+	/* it is valid to use page_address instead of kmap since we are
+	 * working with pages allocated out of the lomem pool per
+	 * alloc_page(GFP_ATOMIC)
+	 */
+	va = skb_frag_address(frag);
+
+	/* we need the header to contain the greater of either ETH_HLEN or
+	 * 60 bytes if the skb->len is less than 60 for skb_pad.
+	 */
+	pull_len = eth_get_headlen(va, ICE_RX_HDR_SIZE);
+
+	/* align pull length to size of long to optimize memcpy performance */
+	skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long)));
+
+	/* update all of the pointers */
+	skb_frag_size_sub(frag, pull_len);
+	frag->page_offset += pull_len;
+	skb->data_len -= pull_len;
+	skb->tail += pull_len;
+}
+
+/**
+ * ice_cleanup_headers - Correct empty headers
+ * @skb: pointer to current skb being fixed
+ *
+ * Also address the case where we are pulling data in on pages only
+ * and as such no data is present in the skb header.
+ *
+ * In addition if skb is not at least 60 bytes we need to pad it so that
+ * it is large enough to qualify as a valid Ethernet frame.
+ *
+ * Returns true if an error was encountered and skb was freed.
+ */
+static bool ice_cleanup_headers(struct sk_buff *skb)
+{
+	/* place header in linear portion of buffer */
+	if (skb_is_nonlinear(skb))
+		ice_pull_tail(skb);
+
+	/* if eth_skb_pad returns an error the skb was freed */
+	if (eth_skb_pad(skb))
+		return true;
+
+	return false;
+}
+
+/**
+ * ice_test_staterr - tests bits in Rx descriptor status and error fields
+ * @rx_desc: pointer to receive descriptor (in le64 format)
+ * @stat_err_bits: value to mask
+ *
+ * This function does some fast chicanery in order to return the
+ * value of the mask which is really only used for boolean tests.
+ * The status_error_len doesn't need to be shifted because it begins
+ * at offset zero.
+ */
+static bool ice_test_staterr(union ice_32b_rx_flex_desc *rx_desc,
+			     const u16 stat_err_bits)
+{
+	return !!(rx_desc->wb.status_error0 &
+		  cpu_to_le16(stat_err_bits));
+}
+
+/**
+ * ice_is_non_eop - process handling of non-EOP buffers
+ * @rx_ring: Rx ring being processed
+ * @rx_desc: Rx descriptor for current buffer
+ * @skb: Current socket buffer containing buffer in progress
+ *
+ * This function updates next to clean.  If the buffer is an EOP buffer
+ * this function exits returning false, otherwise it will place the
+ * sk_buff in the next buffer to be chained and return true indicating
+ * that this is in fact a non-EOP buffer.
+ */
+static bool ice_is_non_eop(struct ice_ring *rx_ring,
+			   union ice_32b_rx_flex_desc *rx_desc,
+			   struct sk_buff *skb)
+{
+	u32 ntc = rx_ring->next_to_clean + 1;
+
+	/* fetch, update, and store next to clean */
+	ntc = (ntc < rx_ring->count) ? ntc : 0;
+	rx_ring->next_to_clean = ntc;
+
+	prefetch(ICE_RX_DESC(rx_ring, ntc));
+
+	/* if we are the last buffer then there is nothing else to do */
+#define ICE_RXD_EOF BIT(ICE_RX_FLEX_DESC_STATUS0_EOF_S)
+	if (likely(ice_test_staterr(rx_desc, ICE_RXD_EOF)))
+		return false;
+
+	/* place skb in next buffer to be received */
+	rx_ring->rx_buf[ntc].skb = skb;
+	rx_ring->rx_stats.non_eop_descs++;
+
+	return true;
+}
+
+/**
+ * ice_receive_skb - Send a completed packet up the stack
+ * @rx_ring: rx ring in play
+ * @skb: packet to send up
+ * @vlan_tag: vlan tag for packet
+ *
+ * This function sends the completed packet (via. skb) up the stack using
+ * gro receive functions (with/without vlan tag)
+ */
+static void ice_receive_skb(struct ice_ring *rx_ring, struct sk_buff *skb,
+			    u16 vlan_tag)
+{
+	if ((rx_ring->netdev->features & NETIF_F_HW_VLAN_CTAG_RX) &&
+	    (vlan_tag & VLAN_VID_MASK)) {
+		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag);
+	}
+	napi_gro_receive(&rx_ring->q_vector->napi, skb);
+}
+
+/**
+ * ice_clean_rx_irq - Clean completed descriptors from Rx ring - bounce buf
+ * @rx_ring: rx descriptor ring to transact packets on
+ * @budget: Total limit on number of packets to process
+ *
+ * This function provides a "bounce buffer" approach to Rx interrupt
+ * processing.  The advantage to this is that on systems that have
+ * expensive overhead for IOMMU access this provides a means of avoiding
+ * it by maintaining the mapping of the page to the system.
+ *
+ * Returns amount of work completed
+ */
+static int ice_clean_rx_irq(struct ice_ring *rx_ring, int budget)
+{
+	unsigned int total_rx_bytes = 0, total_rx_pkts = 0;
+	u16 cleaned_count = ICE_DESC_UNUSED(rx_ring);
+	bool failure = false;
+
+	/* start the loop to process RX packets bounded by 'budget' */
+	while (likely(total_rx_pkts < (unsigned int)budget)) {
+		union ice_32b_rx_flex_desc *rx_desc;
+		struct sk_buff *skb;
+		u16 stat_err_bits;
+		u16 vlan_tag = 0;
+
+		/* return some buffers to hardware, one at a time is too slow */
+		if (cleaned_count >= ICE_RX_BUF_WRITE) {
+			failure = failure ||
+				  ice_alloc_rx_bufs(rx_ring, cleaned_count);
+			cleaned_count = 0;
+		}
+
+		/* get the RX desc from RX ring based on 'next_to_clean' */
+		rx_desc = ICE_RX_DESC(rx_ring, rx_ring->next_to_clean);
+
+		/* status_error_len will always be zero for unused descriptors
+		 * because it's cleared in cleanup, and overlaps with hdr_addr
+		 * which is always zero because packet split isn't used, if the
+		 * hardware wrote DD then it will be non-zero
+		 */
+		stat_err_bits = BIT(ICE_RX_FLEX_DESC_STATUS0_DD_S);
+		if (!ice_test_staterr(rx_desc, stat_err_bits))
+			break;
+
+		/* This memory barrier is needed to keep us from reading
+		 * any other fields out of the rx_desc until we know the
+		 * DD bit is set.
+		 */
+		dma_rmb();
+
+		/* allocate (if needed) and populate skb */
+		skb = ice_fetch_rx_buf(rx_ring, rx_desc);
+		if (!skb)
+			break;
+
+		cleaned_count++;
+
+		/* skip if it is NOP desc */
+		if (ice_is_non_eop(rx_ring, rx_desc, skb))
+			continue;
+
+		stat_err_bits = BIT(ICE_RX_FLEX_DESC_STATUS0_RXE_S);
+		if (unlikely(ice_test_staterr(rx_desc, stat_err_bits))) {
+			dev_kfree_skb_any(skb);
+			continue;
+		}
+
+		stat_err_bits = BIT(ICE_RX_FLEX_DESC_STATUS0_L2TAG1P_S);
+		if (ice_test_staterr(rx_desc, stat_err_bits))
+			vlan_tag = le16_to_cpu(rx_desc->wb.l2tag1);
+
+		/* correct empty headers and pad skb if needed (to make valid
+		 * ethernet frame
+		 */
+		if (ice_cleanup_headers(skb)) {
+			skb = NULL;
+			continue;
+		}
+
+		/* probably a little skewed due to removing CRC */
+		total_rx_bytes += skb->len;
+
+		/* send completed skb up the stack */
+		ice_receive_skb(rx_ring, skb, vlan_tag);
+
+		/* update budget accounting */
+		total_rx_pkts++;
+	}
+
+	/* update queue and vector specific stats */
+	u64_stats_update_begin(&rx_ring->syncp);
+	rx_ring->stats.pkts += total_rx_pkts;
+	rx_ring->stats.bytes += total_rx_bytes;
+	u64_stats_update_end(&rx_ring->syncp);
+	rx_ring->q_vector->rx.total_pkts += total_rx_pkts;
+	rx_ring->q_vector->rx.total_bytes += total_rx_bytes;
+
+	/* guarantee a trip back through this routine if there was a failure */
+	return failure ? budget : (int)total_rx_pkts;
+}
+
+/**
+ * ice_napi_poll - NAPI polling Rx/Tx cleanup routine
+ * @napi: napi struct with our devices info in it
+ * @budget: amount of work driver is allowed to do this pass, in packets
+ *
+ * This function will clean all queues associated with a q_vector.
+ *
+ * Returns the amount of work done
+ */
+int ice_napi_poll(struct napi_struct *napi, int budget)
+{
+	struct ice_q_vector *q_vector =
+				container_of(napi, struct ice_q_vector, napi);
+	struct ice_vsi *vsi = q_vector->vsi;
+	struct ice_pf *pf = vsi->back;
+	bool clean_complete = true;
+	int budget_per_ring = 0;
+	struct ice_ring *ring;
+	int work_done = 0;
+
+	/* Since the actual Tx work is minimal, we can give the Tx a larger
+	 * budget and be more aggressive about cleaning up the Tx descriptors.
+	 */
+	ice_for_each_ring(ring, q_vector->tx)
+		if (!ice_clean_tx_irq(vsi, ring, budget))
+			clean_complete = false;
+
+	/* Handle case where we are called by netpoll with a budget of 0 */
+	if (budget <= 0)
+		return budget;
+
+	/* We attempt to distribute budget to each Rx queue fairly, but don't
+	 * allow the budget to go below 1 because that would exit polling early.
+	 */
+	if (q_vector->num_ring_rx)
+		budget_per_ring = max(budget / q_vector->num_ring_rx, 1);
+
+	ice_for_each_ring(ring, q_vector->rx) {
+		int cleaned;
+
+		cleaned = ice_clean_rx_irq(ring, budget_per_ring);
+		work_done += cleaned;
+		/* if we clean as many as budgeted, we must not be done */
+		if (cleaned >= budget_per_ring)
+			clean_complete = false;
+	}
+
+	/* If work not completed, return budget and polling will return */
+	if (!clean_complete)
+		return budget;
+
+	/* Work is done so exit the polling mode and re-enable the interrupt */
+	napi_complete_done(napi, work_done);
+	if (test_bit(ICE_FLAG_MSIX_ENA, pf->flags))
+		ice_irq_dynamic_ena(&vsi->back->hw, vsi, q_vector);
+	return 0;
+}
+
+/* helper function for building cmd/type/offset */
+static __le64
+build_ctob(u64 td_cmd, u64 td_offset, unsigned int size, u64 td_tag)
+{
+	return cpu_to_le64(ICE_TX_DESC_DTYPE_DATA |
+			   (td_cmd    << ICE_TXD_QW1_CMD_S) |
+			   (td_offset << ICE_TXD_QW1_OFFSET_S) |
+			   ((u64)size << ICE_TXD_QW1_TX_BUF_SZ_S) |
+			   (td_tag    << ICE_TXD_QW1_L2TAG1_S));
+}
+
+/**
+ * __ice_maybe_stop_tx - 2nd level check for tx stop conditions
+ * @tx_ring: the ring to be checked
+ * @size: the size buffer we want to assure is available
+ *
+ * Returns -EBUSY if a stop is needed, else 0
+ */
+static int __ice_maybe_stop_tx(struct ice_ring *tx_ring, unsigned int size)
+{
+	netif_stop_subqueue(tx_ring->netdev, tx_ring->q_index);
+	/* Memory barrier before checking head and tail */
+	smp_mb();
+
+	/* Check again in a case another CPU has just made room available. */
+	if (likely(ICE_DESC_UNUSED(tx_ring) < size))
+		return -EBUSY;
+
+	/* A reprieve! - use start_subqueue because it doesn't call schedule */
+	netif_start_subqueue(tx_ring->netdev, tx_ring->q_index);
+	++tx_ring->tx_stats.restart_q;
+	return 0;
+}
+
+/**
+ * ice_maybe_stop_tx - 1st level check for tx stop conditions
+ * @tx_ring: the ring to be checked
+ * @size:    the size buffer we want to assure is available
+ *
+ * Returns 0 if stop is not needed
+ */
+static int ice_maybe_stop_tx(struct ice_ring *tx_ring, unsigned int size)
+{
+	if (likely(ICE_DESC_UNUSED(tx_ring) >= size))
+		return 0;
+	return __ice_maybe_stop_tx(tx_ring, size);
+}
+
+/**
+ * ice_tx_map - Build the Tx descriptor
+ * @tx_ring: ring to send buffer on
+ * @first: first buffer info buffer to use
+ *
+ * This function loops over the skb data pointed to by *first
+ * and gets a physical address for each memory location and programs
+ * it and the length into the transmit descriptor.
+ */
+static void ice_tx_map(struct ice_ring *tx_ring, struct ice_tx_buf *first)
+{
+	u64 td_offset = 0, td_tag = 0, td_cmd = 0;
+	u16 i = tx_ring->next_to_use;
+	struct skb_frag_struct *frag;
+	unsigned int data_len, size;
+	struct ice_tx_desc *tx_desc;
+	struct ice_tx_buf *tx_buf;
+	struct sk_buff *skb;
+	dma_addr_t dma;
+
+	skb = first->skb;
+
+	data_len = skb->data_len;
+	size = skb_headlen(skb);
+
+	tx_desc = ICE_TX_DESC(tx_ring, i);
+
+	dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE);
+
+	tx_buf = first;
+
+	for (frag = &skb_shinfo(skb)->frags[0];; frag++) {
+		unsigned int max_data = ICE_MAX_DATA_PER_TXD_ALIGNED;
+
+		if (dma_mapping_error(tx_ring->dev, dma))
+			goto dma_error;
+
+		/* record length, and DMA address */
+		dma_unmap_len_set(tx_buf, len, size);
+		dma_unmap_addr_set(tx_buf, dma, dma);
+
+		/* align size to end of page */
+		max_data += -dma & (ICE_MAX_READ_REQ_SIZE - 1);
+		tx_desc->buf_addr = cpu_to_le64(dma);
+
+		/* account for data chunks larger than the hardware
+		 * can handle
+		 */
+		while (unlikely(size > ICE_MAX_DATA_PER_TXD)) {
+			tx_desc->cmd_type_offset_bsz =
+				build_ctob(td_cmd, td_offset, max_data, td_tag);
+
+			tx_desc++;
+			i++;
+
+			if (i == tx_ring->count) {
+				tx_desc = ICE_TX_DESC(tx_ring, 0);
+				i = 0;
+			}
+
+			dma += max_data;
+			size -= max_data;
+
+			max_data = ICE_MAX_DATA_PER_TXD_ALIGNED;
+			tx_desc->buf_addr = cpu_to_le64(dma);
+		}
+
+		if (likely(!data_len))
+			break;
+
+		tx_desc->cmd_type_offset_bsz = build_ctob(td_cmd, td_offset,
+							  size, td_tag);
+
+		tx_desc++;
+		i++;
+
+		if (i == tx_ring->count) {
+			tx_desc = ICE_TX_DESC(tx_ring, 0);
+			i = 0;
+		}
+
+		size = skb_frag_size(frag);
+		data_len -= size;
+
+		dma = skb_frag_dma_map(tx_ring->dev, frag, 0, size,
+				       DMA_TO_DEVICE);
+
+		tx_buf = &tx_ring->tx_buf[i];
+	}
+
+	/* record bytecount for BQL */
+	netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount);
+
+	/* record SW timestamp if HW timestamp is not available */
+	skb_tx_timestamp(first->skb);
+
+	i++;
+	if (i == tx_ring->count)
+		i = 0;
+
+	/* write last descriptor with RS and EOP bits */
+	td_cmd |= (u64)(ICE_TX_DESC_CMD_EOP | ICE_TX_DESC_CMD_RS);
+	tx_desc->cmd_type_offset_bsz =
+			build_ctob(td_cmd, td_offset, size, td_tag);
+
+	/* Force memory writes to complete before letting h/w know there
+	 * are new descriptors to fetch.
+	 *
+	 * We also use this memory barrier to make certain all of the
+	 * status bits have been updated before next_to_watch is written.
+	 */
+	wmb();
+
+	/* set next_to_watch value indicating a packet is present */
+	first->next_to_watch = tx_desc;
+
+	tx_ring->next_to_use = i;
+
+	ice_maybe_stop_tx(tx_ring, DESC_NEEDED);
+
+	/* notify HW of packet */
+	if (netif_xmit_stopped(txring_txq(tx_ring)) || !skb->xmit_more) {
+		writel(i, tx_ring->tail);
+
+		/* we need this if more than one processor can write to our tail
+		 * at a time, it synchronizes IO on IA64/Altix systems
+		 */
+		mmiowb();
+	}
+
+	return;
+
+dma_error:
+	/* clear dma mappings for failed tx_buf map */
+	for (;;) {
+		tx_buf = &tx_ring->tx_buf[i];
+		ice_unmap_and_free_tx_buf(tx_ring, tx_buf);
+		if (tx_buf == first)
+			break;
+		if (i == 0)
+			i = tx_ring->count;
+		i--;
+	}
+
+	tx_ring->next_to_use = i;
+}
+
+/**
+ * ice_txd_use_count  - estimate the number of descriptors needed for Tx
+ * @size: transmit request size in bytes
+ *
+ * Due to hardware alignment restrictions (4K alignment), we need to
+ * assume that we can have no more than 12K of data per descriptor, even
+ * though each descriptor can take up to 16K - 1 bytes of aligned memory.
+ * Thus, we need to divide by 12K. But division is slow! Instead,
+ * we decompose the operation into shifts and one relatively cheap
+ * multiply operation.
+ *
+ * To divide by 12K, we first divide by 4K, then divide by 3:
+ *     To divide by 4K, shift right by 12 bits
+ *     To divide by 3, multiply by 85, then divide by 256
+ *     (Divide by 256 is done by shifting right by 8 bits)
+ * Finally, we add one to round up. Because 256 isn't an exact multiple of
+ * 3, we'll underestimate near each multiple of 12K. This is actually more
+ * accurate as we have 4K - 1 of wiggle room that we can fit into the last
+ * segment.  For our purposes this is accurate out to 1M which is orders of
+ * magnitude greater than our largest possible GSO size.
+ *
+ * This would then be implemented as:
+ *     return (((size >> 12) * 85) >> 8) + 1;
+ *
+ * Since multiplication and division are commutative, we can reorder
+ * operations into:
+ *     return ((size * 85) >> 20) + 1;
+ */
+static unsigned int ice_txd_use_count(unsigned int size)
+{
+	return ((size * 85) >> 20) + 1;
+}
+
+/**
+ * ice_xmit_desc_count - calculate number of tx descriptors needed
+ * @skb: send buffer
+ *
+ * Returns number of data descriptors needed for this skb.
+ */
+static unsigned int ice_xmit_desc_count(struct sk_buff *skb)
+{
+	const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0];
+	unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
+	unsigned int count = 0, size = skb_headlen(skb);
+
+	for (;;) {
+		count += ice_txd_use_count(size);
+
+		if (!nr_frags--)
+			break;
+
+		size = skb_frag_size(frag++);
+	}
+
+	return count;
+}
+
+/**
+ * __ice_chk_linearize - Check if there are more than 8 buffers per packet
+ * @skb: send buffer
+ *
+ * Note: This HW can't DMA more than 8 buffers to build a packet on the wire
+ * and so we need to figure out the cases where we need to linearize the skb.
+ *
+ * For TSO we need to count the TSO header and segment payload separately.
+ * As such we need to check cases where we have 7 fragments or more as we
+ * can potentially require 9 DMA transactions, 1 for the TSO header, 1 for
+ * the segment payload in the first descriptor, and another 7 for the
+ * fragments.
+ */
+static bool __ice_chk_linearize(struct sk_buff *skb)
+{
+	const struct skb_frag_struct *frag, *stale;
+	int nr_frags, sum;
+
+	/* no need to check if number of frags is less than 7 */
+	nr_frags = skb_shinfo(skb)->nr_frags;
+	if (nr_frags < (ICE_MAX_BUF_TXD - 1))
+		return false;
+
+	/* We need to walk through the list and validate that each group
+	 * of 6 fragments totals at least gso_size.
+	 */
+	nr_frags -= ICE_MAX_BUF_TXD - 2;
+	frag = &skb_shinfo(skb)->frags[0];
+
+	/* Initialize size to the negative value of gso_size minus 1.  We
+	 * use this as the worst case scenerio in which the frag ahead
+	 * of us only provides one byte which is why we are limited to 6
+	 * descriptors for a single transmit as the header and previous
+	 * fragment are already consuming 2 descriptors.
+	 */
+	sum = 1 - skb_shinfo(skb)->gso_size;
+
+	/* Add size of frags 0 through 4 to create our initial sum */
+	sum += skb_frag_size(frag++);
+	sum += skb_frag_size(frag++);
+	sum += skb_frag_size(frag++);
+	sum += skb_frag_size(frag++);
+	sum += skb_frag_size(frag++);
+
+	/* Walk through fragments adding latest fragment, testing it, and
+	 * then removing stale fragments from the sum.
+	 */
+	stale = &skb_shinfo(skb)->frags[0];
+	for (;;) {
+		sum += skb_frag_size(frag++);
+
+		/* if sum is negative we failed to make sufficient progress */
+		if (sum < 0)
+			return true;
+
+		if (!nr_frags--)
+			break;
+
+		sum -= skb_frag_size(stale++);
+	}
+
+	return false;
+}
+
+/**
+ * ice_chk_linearize - Check if there are more than 8 fragments per packet
+ * @skb:      send buffer
+ * @count:    number of buffers used
+ *
+ * Note: Our HW can't scatter-gather more than 8 fragments to build
+ * a packet on the wire and so we need to figure out the cases where we
+ * need to linearize the skb.
+ */
+static bool ice_chk_linearize(struct sk_buff *skb, unsigned int count)
+{
+	/* Both TSO and single send will work if count is less than 8 */
+	if (likely(count < ICE_MAX_BUF_TXD))
+		return false;
+
+	if (skb_is_gso(skb))
+		return __ice_chk_linearize(skb);
+
+	/* we can support up to 8 data buffers for a single send */
+	return count != ICE_MAX_BUF_TXD;
+}
+
+/**
+ * ice_xmit_frame_ring - Sends buffer on Tx ring
+ * @skb: send buffer
+ * @tx_ring: ring to send buffer on
+ *
+ * Returns NETDEV_TX_OK if sent, else an error code
+ */
+static netdev_tx_t
+ice_xmit_frame_ring(struct sk_buff *skb, struct ice_ring *tx_ring)
+{
+	struct ice_tx_buf *first;
+	unsigned int count;
+
+	count = ice_xmit_desc_count(skb);
+	if (ice_chk_linearize(skb, count)) {
+		if (__skb_linearize(skb))
+			goto out_drop;
+		count = ice_txd_use_count(skb->len);
+		tx_ring->tx_stats.tx_linearize++;
+	}
+
+	/* need: 1 descriptor per page * PAGE_SIZE/ICE_MAX_DATA_PER_TXD,
+	 *       + 1 desc for skb_head_len/ICE_MAX_DATA_PER_TXD,
+	 *       + 4 desc gap to avoid the cache line where head is,
+	 *       + 1 desc for context descriptor,
+	 * otherwise try next time
+	 */
+	if (ice_maybe_stop_tx(tx_ring, count + 4 + 1)) {
+		tx_ring->tx_stats.tx_busy++;
+		return NETDEV_TX_BUSY;
+	}
+
+	/* record the location of the first descriptor for this packet */
+	first = &tx_ring->tx_buf[tx_ring->next_to_use];
+	first->skb = skb;
+	first->bytecount = max_t(unsigned int, skb->len, ETH_ZLEN);
+	first->gso_segs = 1;
+
+	ice_tx_map(tx_ring, first);
+	return NETDEV_TX_OK;
+
+out_drop:
+	dev_kfree_skb_any(skb);
+	return NETDEV_TX_OK;
+}
+
+/**
+ * ice_start_xmit - Selects the correct VSI and Tx queue to send buffer
+ * @skb: send buffer
+ * @netdev: network interface device structure
+ *
+ * Returns NETDEV_TX_OK if sent, else an error code
+ */
+netdev_tx_t ice_start_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+	struct ice_netdev_priv *np = netdev_priv(netdev);
+	struct ice_vsi *vsi = np->vsi;
+	struct ice_ring *tx_ring;
+
+	tx_ring = vsi->tx_rings[skb->queue_mapping];
+
+	/* hardware can't handle really short frames, hardware padding works
+	 * beyond this point
+	 */
+	if (skb_put_padto(skb, ICE_MIN_TX_LEN))
+		return NETDEV_TX_OK;
+
+	return ice_xmit_frame_ring(skb, tx_ring);
+}
diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.h b/drivers/net/ethernet/intel/ice/ice_txrx.h
index 367bfc6fa485..4bcdb79ef181 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx.h
+++ b/drivers/net/ethernet/intel/ice/ice_txrx.h
@@ -21,8 +21,23 @@
 #define ICE_DFLT_IRQ_WORK	256
 #define ICE_RXBUF_2048		2048
 #define ICE_MAX_CHAINED_RX_BUFS	5
+#define ICE_MAX_BUF_TXD		8
+#define ICE_MIN_TX_LEN		17
+
+/* The size limit for a transmit buffer in a descriptor is (16K - 1).
+ * In order to align with the read requests we will align the value to
+ * the nearest 4K which represents our maximum read request size.
+ */
+#define ICE_MAX_READ_REQ_SIZE	4096
+#define ICE_MAX_DATA_PER_TXD	(16 * 1024 - 1)
+#define ICE_MAX_DATA_PER_TXD_ALIGNED \
+	(~(ICE_MAX_READ_REQ_SIZE - 1) & ICE_MAX_DATA_PER_TXD)
+
+#define ICE_RX_BUF_WRITE	16	/* Must be power of 2 */
 #define ICE_MAX_TXQ_PER_TXQG	128
 
+/* Tx Descriptors needed, worst case */
+#define DESC_NEEDED (MAX_SKB_FRAGS + 4)
 #define ICE_DESC_UNUSED(R)	\
 	((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \
 	(R)->next_to_clean - (R)->next_to_use - 1)
@@ -44,6 +59,24 @@ struct ice_rx_buf {
 	unsigned int page_offset;
 };
 
+struct ice_q_stats {
+	u64 pkts;
+	u64 bytes;
+};
+
+struct ice_txq_stats {
+	u64 restart_q;
+	u64 tx_busy;
+	u64 tx_linearize;
+};
+
+struct ice_rxq_stats {
+	u64 non_eop_descs;
+	u64 alloc_page_failed;
+	u64 alloc_buf_failed;
+	u64 page_reuse_count;
+};
+
 /* this enum matches hardware bits and is meant to be used by DYN_CTLN
  * registers and QINT registers or more generally anywhere in the manual
  * mentioning ITR_INDX, ITR_NONE cannot be used as an index 'n' into any
@@ -108,6 +141,15 @@ struct ice_ring {
 	u16 next_to_clean;
 
 	bool ring_active;		/* is ring online or not */
+
+	/* stats structs */
+	struct ice_q_stats	stats;
+	struct u64_stats_sync syncp;
+	union {
+		struct ice_txq_stats tx_stats;
+		struct ice_rxq_stats rx_stats;
+	};
+
 	unsigned int size;		/* length of descriptor ring in bytes */
 	dma_addr_t dma;			/* physical address of ring */
 	struct rcu_head rcu;		/* to avoid race on free */
@@ -135,10 +177,13 @@ struct ice_ring_container {
 	for (pos = (head).ring; pos; pos = pos->next)
 
 bool ice_alloc_rx_bufs(struct ice_ring *rxr, u16 cleaned_count);
+netdev_tx_t ice_start_xmit(struct sk_buff *skb, struct net_device *netdev);
 void ice_clean_tx_ring(struct ice_ring *tx_ring);
 void ice_clean_rx_ring(struct ice_ring *rx_ring);
 int ice_setup_tx_ring(struct ice_ring *tx_ring);
 int ice_setup_rx_ring(struct ice_ring *rx_ring);
 void ice_free_tx_ring(struct ice_ring *tx_ring);
 void ice_free_rx_ring(struct ice_ring *rx_ring);
+int ice_napi_poll(struct napi_struct *napi, int budget);
+
 #endif /* _ICE_TXRX_H_ */
-- 
2.14.3



More information about the Intel-wired-lan mailing list