[Intel-wired-lan] [next-queue PATCH v5 7/9] igb: Add MAC address support for ethtool nftuple filters

Vinicius Costa Gomes vinicius.gomes at intel.com
Thu Mar 22 00:33:51 UTC 2018


This adds the capability of configuring the queue steering of arriving
packets based on their source and destination MAC addresses.

In practical terms this adds support for the following use cases,
characterized by these examples:

$ ethtool -N eth0 flow-type ether dst aa:aa:aa:aa:aa:aa action 0
(this will direct packets with destination address "aa:aa:aa:aa:aa:aa"
to the RX queue 0)

$ ethtool -N eth0 flow-type ether src 44:44:44:44:44:44 action 3
(this will direct packets with source address "44:44:44:44:44:44" to
the RX queue 3)

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes at intel.com>
---
 drivers/net/ethernet/intel/igb/igb_ethtool.c | 35 ++++++++++++++++++++++++----
 1 file changed, 31 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index 4c6a1b78c413..27caa413ade2 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -2494,6 +2494,23 @@ static int igb_get_ethtool_nfc_entry(struct igb_adapter *adapter,
 			fsp->h_ext.vlan_tci = rule->filter.vlan_tci;
 			fsp->m_ext.vlan_tci = htons(VLAN_PRIO_MASK);
 		}
+		if (rule->filter.match_flags & IGB_FILTER_FLAG_DST_MAC_ADDR) {
+			ether_addr_copy(fsp->h_u.ether_spec.h_dest,
+					rule->filter.dst_addr);
+			/* As we only support matching by the full
+			 * mask, return the mask to userspace
+			 */
+			eth_broadcast_addr(fsp->m_u.ether_spec.h_dest);
+		}
+		if (rule->filter.match_flags & IGB_FILTER_FLAG_SRC_MAC_ADDR) {
+			ether_addr_copy(fsp->h_u.ether_spec.h_source,
+					rule->filter.src_addr);
+			/* As we only support matching by the full
+			 * mask, return the mask to userspace
+			 */
+			eth_broadcast_addr(fsp->m_u.ether_spec.h_source);
+		}
+
 		return 0;
 	}
 	return -EINVAL;
@@ -2932,10 +2949,6 @@ static int igb_add_ethtool_nfc_entry(struct igb_adapter *adapter,
 	if ((fsp->flow_type & ~FLOW_EXT) != ETHER_FLOW)
 		return -EINVAL;
 
-	if (fsp->m_u.ether_spec.h_proto != ETHER_TYPE_FULL_MASK &&
-	    fsp->m_ext.vlan_tci != htons(VLAN_PRIO_MASK))
-		return -EINVAL;
-
 	input = kzalloc(sizeof(*input), GFP_KERNEL);
 	if (!input)
 		return -ENOMEM;
@@ -2945,6 +2958,20 @@ static int igb_add_ethtool_nfc_entry(struct igb_adapter *adapter,
 		input->filter.match_flags = IGB_FILTER_FLAG_ETHER_TYPE;
 	}
 
+	/* Only support matching addresses by the full mask */
+	if (is_broadcast_ether_addr(fsp->m_u.ether_spec.h_source)) {
+		input->filter.match_flags |= IGB_FILTER_FLAG_SRC_MAC_ADDR;
+		ether_addr_copy(input->filter.src_addr,
+				fsp->h_u.ether_spec.h_source);
+	}
+
+	/* Only support matching addresses by the full mask */
+	if (is_broadcast_ether_addr(fsp->m_u.ether_spec.h_dest)) {
+		input->filter.match_flags |= IGB_FILTER_FLAG_DST_MAC_ADDR;
+		ether_addr_copy(input->filter.dst_addr,
+				fsp->h_u.ether_spec.h_dest);
+	}
+
 	if ((fsp->flow_type & FLOW_EXT) && fsp->m_ext.vlan_tci) {
 		if (fsp->m_ext.vlan_tci != htons(VLAN_PRIO_MASK)) {
 			err = -EINVAL;
-- 
2.16.2



More information about the Intel-wired-lan mailing list