[Intel-wired-lan] [PATCH 1/2] Documentation: ixgb: Prep documentation for RST conversion
Shannon Nelson
shannon.nelson at oracle.com
Wed Aug 29 16:45:19 UTC 2018
On 8/29/2018 8:39 AM, Jeff Kirsher wrote:
> Before making the conversion to the rst (reStructured Text) format, there
> are changes needed to the documentation so that there are no build errors.
>
> Also fixed old/broken URLs to the correct or updated URL.
>
> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher at intel.com>
> ---
> Documentation/networking/ixgb.txt | 484 +++++++++++++-----------------
> 1 file changed, 214 insertions(+), 270 deletions(-)
>
> diff --git a/Documentation/networking/ixgb.txt b/Documentation/networking/ixgb.txt
> index eccdc4c26af3..86b18330666c 100644
> --- a/Documentation/networking/ixgb.txt
> +++ b/Documentation/networking/ixgb.txt
> @@ -1,7 +1,8 @@
Add SPDX-License-Identifier?
sln
> +=====================================================================
> Linux Base Driver for 10 Gigabit Intel(R) Ethernet Network Connection
> =====================================================================
>
> -March 14, 2011
> +June 22, 2018
>
>
> Contents
> @@ -51,52 +52,18 @@ Identifying Your Adapter
> The following Intel network adapters are compatible with the drivers in this
> release:
>
> -Controller Adapter Name Physical Layer
> ----------- ------------ --------------
> -82597EX Intel(R) PRO/10GbE LR/SR/CX4 10G Base-LR (1310 nm optical fiber)
> - Server Adapters 10G Base-SR (850 nm optical fiber)
> - 10G Base-CX4(twin-axial copper cabling)
> ++------------+------------------------------+----------------------------------+
> +| Controller | Adapter Name | Physical Layer |
> ++============+==============================+==================================+
> +| 82597EX | Intel(R) PRO/10GbE LR/SR/CX4 | - 10G Base-LR (fiber) |
> +| | Server Adapters | - 10G Base-SR (fiber) |
> +| | | - 10G Base-CX4 (copper) |
> ++------------+------------------------------+----------------------------------+
>
> For more information on how to identify your adapter, go to the Adapter &
> Driver ID Guide at:
>
> - http://support.intel.com/support/network/sb/CS-012904.htm
> -
> -
> -Building and Installation
> -=========================
> -
> -select m for "Intel(R) PRO/10GbE support" located at:
> - Location:
> - -> Device Drivers
> - -> Network device support (NETDEVICES [=y])
> - -> Ethernet (10000 Mbit) (NETDEV_10000 [=y])
> -1. make modules && make modules_install
> -
> -2. Load the module:
> -
> - modprobe ixgb <parameter>=<value>
> -
> - The insmod command can be used if the full
> - path to the driver module is specified. For example:
> -
> - insmod /lib/modules/<KERNEL VERSION>/kernel/drivers/net/ixgb/ixgb.ko
> -
> - With 2.6 based kernels also make sure that older ixgb drivers are
> - removed from the kernel, before loading the new module:
> -
> - rmmod ixgb; modprobe ixgb
> -
> -3. Assign an IP address to the interface by entering the following, where
> - x is the interface number:
> -
> - ip addr add ethx <IP_address>
> -
> -4. Verify that the interface works. Enter the following, where <IP_address>
> - is the IP address for another machine on the same subnet as the interface
> - that is being tested:
> -
> - ping <IP_address>
> + http://support.intel.com
>
>
> Command Line Parameters
> @@ -104,63 +71,28 @@ Command Line Parameters
>
> If the driver is built as a module, the following optional parameters are
> used by entering them on the command line with the modprobe command using
> -this syntax:
> +this syntax::
>
> - modprobe ixgb [<option>=<VAL1>,<VAL2>,...]
> + modprobe ixgb [<option>=<VAL1>,<VAL2>,...]
>
> -For example, with two 10GbE PCI adapters, entering:
> +The default value for each parameter is generally the recommended setting,
> +unless otherwise noted.
>
> - modprobe ixgb TxDescriptors=80,128
> +copybreak
> +---------
> +:Valid Range: 0-XXXX
> +:Default Value: 256
>
> -loads the ixgb driver with 80 TX resources for the first adapter and 128 TX
> -resources for the second adapter.
> + This is the maximum size of packet that is copied to a new buffer on
> + receive.
>
> -The default value for each parameter is generally the recommended setting,
> -unless otherwise noted.
> +debug
> +-----
> +:Valid Range: 0-16 (0=none,...,16=all)
> +:Default Value: 0
>
> -FlowControl
> -Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
> -Default: Read from the EEPROM
> - If EEPROM is not detected, default is 1
> - This parameter controls the automatic generation(Tx) and response(Rx) to
> - Ethernet PAUSE frames. There are hardware bugs associated with enabling
> - Tx flow control so beware.
> -
> -RxDescriptors
> -Valid Range: 64-512
> -Default Value: 512
> - This value is the number of receive descriptors allocated by the driver.
> - Increasing this value allows the driver to buffer more incoming packets.
> - Each descriptor is 16 bytes. A receive buffer is also allocated for
> - each descriptor and can be either 2048, 4056, 8192, or 16384 bytes,
> - depending on the MTU setting. When the MTU size is 1500 or less, the
> - receive buffer size is 2048 bytes. When the MTU is greater than 1500 the
> - receive buffer size will be either 4056, 8192, or 16384 bytes. The
> - maximum MTU size is 16114.
> -
> -RxIntDelay
> -Valid Range: 0-65535 (0=off)
> -Default Value: 72
> - This value delays the generation of receive interrupts in units of
> - 0.8192 microseconds. Receive interrupt reduction can improve CPU
> - efficiency if properly tuned for specific network traffic. Increasing
> - this value adds extra latency to frame reception and can end up
> - decreasing the throughput of TCP traffic. If the system is reporting
> - dropped receives, this value may be set too high, causing the driver to
> - run out of available receive descriptors.
> -
> -TxDescriptors
> -Valid Range: 64-4096
> -Default Value: 256
> - This value is the number of transmit descriptors allocated by the driver.
> - Increasing this value allows the driver to queue more transmits. Each
> - descriptor is 16 bytes.
> -
> -XsumRX
> -Valid Range: 0-1
> -Default Value: 1
> - A value of '1' indicates that the driver should enable IP checksum
> - offload for received packets (both UDP and TCP) to the adapter hardware.
> + This parameter controls the debug level with regards to driver messages
> + and logging.
>
>
> Improving Performance
> @@ -173,80 +105,89 @@ of Linux to transmit and receive data. The following enhancements were
> originally acquired from settings published at http://www.spec.org/web99/ for
> various submitted results using Linux.
>
> -NOTE: These changes are only suggestions, and serve as a starting point for
> - tuning your network performance.
> +NOTE:
> + These changes are only suggestions, and serve as a starting point for
> + tuning your network performance.
>
> The changes are made in three major ways, listed in order of greatest effect:
> +
> - Use ip link to modify the mtu (maximum transmission unit) and the txqueuelen
> parameter.
> - Use sysctl to modify /proc parameters (essentially kernel tuning)
> - Use setpci to modify the MMRBC field in PCI-X configuration space to increase
> transmit burst lengths on the bus.
>
> -NOTE: setpci modifies the adapter's configuration registers to allow it to read
> -up to 4k bytes at a time (for transmits). However, for some systems the
> -behavior after modifying this register may be undefined (possibly errors of
> -some kind). A power-cycle, hard reset or explicitly setting the e6 register
> -back to 22 (setpci -d 8086:1a48 e6.b=22) may be required to get back to a
> -stable configuration.
> +NOTE:
> + setpci modifies the adapter's configuration registers to allow it to read
> + up to 4k bytes at a time (for transmits). However, for some systems the
> + behavior after modifying this register may be undefined (possibly errors of
> + some kind). A power-cycle, hard reset or explicitly setting the e6 register
> + back to 22 (setpci -d 8086:1a48 e6.b=22) may be required to get back to a
> + stable configuration.
>
> - COPY these lines and paste them into ixgb_perf.sh:
> -#!/bin/bash
> -echo "configuring network performance , edit this file to change the interface
> -or device ID of 10GbE card"
> -# set mmrbc to 4k reads, modify only Intel 10GbE device IDs
> -# replace 1a48 with appropriate 10GbE device's ID installed on the system,
> -# if needed.
> -setpci -d 8086:1a48 e6.b=2e
> -# set the MTU (max transmission unit) - it requires your switch and clients
> -# to change as well.
> -# set the txqueuelen
> -# your ixgb adapter should be loaded as eth1 for this to work, change if needed
> -ip li set dev eth1 mtu 9000 txqueuelen 1000 up
> -# call the sysctl utility to modify /proc/sys entries
> -sysctl -p ./sysctl_ixgb.conf
> -- END ixgb_perf.sh
> +
> +::
> +
> + #!/bin/bash
> +
> + echo "configuring network performance , edit this file to change the interface
> + or device ID of 10GbE card"
> + # set mmrbc to 4k reads, modify only Intel 10GbE device IDs
> + # replace 1a48 with appropriate 10GbE device's ID installed on the system,
> + # if needed.
> + setpci -d 8086:1a48 e6.b=2e
> + # set the MTU (max transmission unit) - it requires your switch and clients
> + # to change as well.
> + # set the txqueuelen
> + # your ixgb adapter should be loaded as eth1 for this to work, change if needed
> + ip li set dev eth1 mtu 9000 txqueuelen 1000 up
> + # call the sysctl utility to modify /proc/sys entries
> + sysctl -p ./sysctl_ixgb.conf
>
> - COPY these lines and paste them into sysctl_ixgb.conf:
> -# some of the defaults may be different for your kernel
> -# call this file with sysctl -p <this file>
> -# these are just suggested values that worked well to increase throughput in
> -# several network benchmark tests, your mileage may vary
> -
> -### IPV4 specific settings
> -# turn TCP timestamp support off, default 1, reduces CPU use
> -net.ipv4.tcp_timestamps = 0
> -# turn SACK support off, default on
> -# on systems with a VERY fast bus -> memory interface this is the big gainer
> -net.ipv4.tcp_sack = 0
> -# set min/default/max TCP read buffer, default 4096 87380 174760
> -net.ipv4.tcp_rmem = 10000000 10000000 10000000
> -# set min/pressure/max TCP write buffer, default 4096 16384 131072
> -net.ipv4.tcp_wmem = 10000000 10000000 10000000
> -# set min/pressure/max TCP buffer space, default 31744 32256 32768
> -net.ipv4.tcp_mem = 10000000 10000000 10000000
> -
> -### CORE settings (mostly for socket and UDP effect)
> -# set maximum receive socket buffer size, default 131071
> -net.core.rmem_max = 524287
> -# set maximum send socket buffer size, default 131071
> -net.core.wmem_max = 524287
> -# set default receive socket buffer size, default 65535
> -net.core.rmem_default = 524287
> -# set default send socket buffer size, default 65535
> -net.core.wmem_default = 524287
> -# set maximum amount of option memory buffers, default 10240
> -net.core.optmem_max = 524287
> -# set number of unprocessed input packets before kernel starts dropping them; default 300
> -net.core.netdev_max_backlog = 300000
> -- END sysctl_ixgb.conf
> +
> +::
> +
> + # some of the defaults may be different for your kernel
> + # call this file with sysctl -p <this file>
> + # these are just suggested values that worked well to increase throughput in
> + # several network benchmark tests, your mileage may vary
> +
> + ### IPV4 specific settings
> + # turn TCP timestamp support off, default 1, reduces CPU use
> + net.ipv4.tcp_timestamps = 0
> + # turn SACK support off, default on
> + # on systems with a VERY fast bus -> memory interface this is the big gainer
> + net.ipv4.tcp_sack = 0
> + # set min/default/max TCP read buffer, default 4096 87380 174760
> + net.ipv4.tcp_rmem = 10000000 10000000 10000000
> + # set min/pressure/max TCP write buffer, default 4096 16384 131072
> + net.ipv4.tcp_wmem = 10000000 10000000 10000000
> + # set min/pressure/max TCP buffer space, default 31744 32256 32768
> + net.ipv4.tcp_mem = 10000000 10000000 10000000
> +
> + ### CORE settings (mostly for socket and UDP effect)
> + # set maximum receive socket buffer size, default 131071
> + net.core.rmem_max = 524287
> + # set maximum send socket buffer size, default 131071
> + net.core.wmem_max = 524287
> + # set default receive socket buffer size, default 65535
> + net.core.rmem_default = 524287
> + # set default send socket buffer size, default 65535
> + net.core.wmem_default = 524287
> + # set maximum amount of option memory buffers, default 10240
> + net.core.optmem_max = 524287
> + # set number of unprocessed input packets before kernel starts dropping them; default 300
> + net.core.netdev_max_backlog = 300000
>
> Edit the ixgb_perf.sh script if necessary to change eth1 to whatever interface
> your ixgb driver is using and/or replace '1a48' with appropriate 10GbE device's
> ID installed on the system.
>
> -NOTE: Unless these scripts are added to the boot process, these changes will
> - only last only until the next system reboot.
> +NOTE:
> + Unless these scripts are added to the boot process, these changes will
> + only last only until the next system reboot.
>
>
> Resolving Slow UDP Traffic
> @@ -257,10 +198,14 @@ the network stack buffers as large as they need to be to support high UDP
> transfer rates. One way to alleviate this problem is to allow more memory to
> be used by the IP stack to store incoming data.
>
> -For instance, use the commands:
> +For instance, use the commands::
> +
> sysctl -w net.core.rmem_max=262143
> -and
> +
> +and::
> +
> sysctl -w net.core.rmem_default=262143
> +
> to increase the read buffer memory max and default to 262143 (256k - 1) from
> defaults of max=131071 (128k - 1) and default=65535 (64k - 1). These variables
> will increase the amount of memory used by the network stack for receives, and
> @@ -270,150 +215,149 @@ can be increased significantly more if necessary for your application.
> Additional Configurations
> =========================
>
> - Configuring the Driver on Different Distributions
> - -------------------------------------------------
> - Configuring a network driver to load properly when the system is started is
> - distribution dependent. Typically, the configuration process involves adding
> - an alias line to /etc/modprobe.conf as well as editing other system startup
> - scripts and/or configuration files. Many popular Linux distributions ship
> - with tools to make these changes for you. To learn the proper way to
> - configure a network device for your system, refer to your distribution
> - documentation. If during this process you are asked for the driver or module
> - name, the name for the Linux Base Driver for the Intel 10GbE Family of
> - Adapters is ixgb.
> -
> - Viewing Link Messages
> - ---------------------
> - Link messages will not be displayed to the console if the distribution is
> - restricting system messages. In order to see network driver link messages on
> - your console, set dmesg to eight by entering the following:
> +Configuring the Driver on Different Distributions
> +-------------------------------------------------
> +Configuring a network driver to load properly when the system is started is
> +distribution dependent. Typically, the configuration process involves adding
> +an alias line to /etc/modprobe.conf as well as editing other system startup
> +scripts and/or configuration files. Many popular Linux distributions ship
> +with tools to make these changes for you. To learn the proper way to
> +configure a network device for your system, refer to your distribution
> +documentation. If during this process you are asked for the driver or module
> +name, the name for the Linux Base Driver for the Intel 10GbE Family of
> +Adapters is ixgb.
>
> - dmesg -n 8
> +Viewing Link Messages
> +---------------------
> +Link messages will not be displayed to the console if the distribution is
> +restricting system messages. In order to see network driver link messages on
> +your console, set dmesg to eight by entering the following::
>
> - NOTE: This setting is not saved across reboots.
> + dmesg -n 8
>
> +NOTE:
> + This setting is not saved across reboots.
>
> - Jumbo Frames
> - ------------
> - The driver supports Jumbo Frames for all adapters. Jumbo Frames support is
> - enabled by changing the MTU to a value larger than the default of 1500.
> - The maximum value for the MTU is 16114. Use the ip command to
> - increase the MTU size. For example:
> +Jumbo Frames
> +------------
> +The driver supports Jumbo Frames for all adapters. Jumbo Frames support is
> +enabled by changing the MTU to a value larger than the default of 1500.
> +The maximum value for the MTU is 16114. Use the ip command to
> +increase the MTU size. For example::
>
> - ip li set dev ethx mtu 9000
> + ip li set dev ethx mtu 9000
>
> - The maximum MTU setting for Jumbo Frames is 16114. This value coincides
> - with the maximum Jumbo Frames size of 16128.
> +The maximum MTU setting for Jumbo Frames is 16114. This value coincides
> +with the maximum Jumbo Frames size of 16128.
>
> +Ethtool
> +-------
> +The driver utilizes the ethtool interface for driver configuration and
> +diagnostics, as well as displaying statistical information. The ethtool
> +version 1.6 or later is required for this functionality.
>
> - ethtool
> - -------
> - The driver utilizes the ethtool interface for driver configuration and
> - diagnostics, as well as displaying statistical information. The ethtool
> - version 1.6 or later is required for this functionality.
> +The latest release of ethtool can be found from
> +https://www.kernel.org/pub/software/network/ethtool/
>
> - The latest release of ethtool can be found from
> - https://www.kernel.org/pub/software/network/ethtool/
> +NOTE:
> + The ethtool version 1.6 only supports a limited set of ethtool options.
> + Support for a more complete ethtool feature set can be enabled by
> + upgrading to the latest version.
>
> - NOTE: The ethtool version 1.6 only supports a limited set of ethtool options.
> - Support for a more complete ethtool feature set can be enabled by
> - upgrading to the latest version.
> +NAPI
> +----
> +NAPI (Rx polling mode) is supported in the ixgb driver.
>
> -
> - NAPI
> - ----
> -
> - NAPI (Rx polling mode) is supported in the ixgb driver.
> -
> - See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
> +See https://wiki.linuxfoundation.org/networking/napi for more information on
> +NAPI.
>
>
> Known Issues/Troubleshooting
> ============================
>
> - NOTE: After installing the driver, if your Intel Network Connection is not
> +NOTE:
> + After installing the driver, if your Intel Network Connection is not
> working, verify in the "In This Release" section of the readme that you have
> installed the correct driver.
>
> - Intel(R) PRO/10GbE CX4 Server Adapter Cable Interoperability Issue with
> - Fujitsu XENPAK Module in SmartBits Chassis
> - ---------------------------------------------------------------------
> - Excessive CRC errors may be observed if the Intel(R) PRO/10GbE CX4
> - Server adapter is connected to a Fujitsu XENPAK CX4 module in a SmartBits
> - chassis using 15 m/24AWG cable assemblies manufactured by Fujitsu or Leoni.
> - The CRC errors may be received either by the Intel(R) PRO/10GbE CX4
> - Server adapter or the SmartBits. If this situation occurs using a different
> - cable assembly may resolve the issue.
> -
> - CX4 Server Adapter Cable Interoperability Issues with HP Procurve 3400cl
> - Switch Port
> - ------------------------------------------------------------------------
> - Excessive CRC errors may be observed if the Intel(R) PRO/10GbE CX4 Server
> - adapter is connected to an HP Procurve 3400cl switch port using short cables
> - (1 m or shorter). If this situation occurs, using a longer cable may resolve
> - the issue.
> -
> - Excessive CRC errors may be observed using Fujitsu 24AWG cable assemblies that
> - Are 10 m or longer or where using a Leoni 15 m/24AWG cable assembly. The CRC
> - errors may be received either by the CX4 Server adapter or at the switch. If
> - this situation occurs, using a different cable assembly may resolve the issue.
> -
> -
> - Jumbo Frames System Requirement
> - -------------------------------
> - Memory allocation failures have been observed on Linux systems with 64 MB
> - of RAM or less that are running Jumbo Frames. If you are using Jumbo
> - Frames, your system may require more than the advertised minimum
> - requirement of 64 MB of system memory.
> -
> -
> - Performance Degradation with Jumbo Frames
> - -----------------------------------------
> - Degradation in throughput performance may be observed in some Jumbo frames
> - environments. If this is observed, increasing the application's socket buffer
> - size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help.
> - See the specific application manual and /usr/src/linux*/Documentation/
> - networking/ip-sysctl.txt for more details.
> -
> -
> - Allocating Rx Buffers when Using Jumbo Frames
> - ---------------------------------------------
> - Allocating Rx buffers when using Jumbo Frames on 2.6.x kernels may fail if
> - the available memory is heavily fragmented. This issue may be seen with PCI-X
> - adapters or with packet split disabled. This can be reduced or eliminated
> - by changing the amount of available memory for receive buffer allocation, by
> - increasing /proc/sys/vm/min_free_kbytes.
> -
> -
> - Multiple Interfaces on Same Ethernet Broadcast Network
> - ------------------------------------------------------
> - Due to the default ARP behavior on Linux, it is not possible to have
> - one system on two IP networks in the same Ethernet broadcast domain
> - (non-partitioned switch) behave as expected. All Ethernet interfaces
> - will respond to IP traffic for any IP address assigned to the system.
> - This results in unbalanced receive traffic.
> -
> - If you have multiple interfaces in a server, do either of the following:
> -
> - - Turn on ARP filtering by entering:
> +Cable Interoperability Issue with Fujitsu XENPAK Module in SmartBits Chassis
> +----------------------------------------------------------------------------
> +Excessive CRC errors may be observed if the Intel(R) PRO/10GbE CX4
> +Server adapter is connected to a Fujitsu XENPAK CX4 module in a SmartBits
> +chassis using 15 m/24AWG cable assemblies manufactured by Fujitsu or Leoni.
> +The CRC errors may be received either by the Intel(R) PRO/10GbE CX4
> +Server adapter or the SmartBits. If this situation occurs using a different
> +cable assembly may resolve the issue.
> +
> +Cable Interoperability Issues with HP Procurve 3400cl Switch Port
> +-----------------------------------------------------------------
> +Excessive CRC errors may be observed if the Intel(R) PRO/10GbE CX4 Server
> +adapter is connected to an HP Procurve 3400cl switch port using short cables
> +(1 m or shorter). If this situation occurs, using a longer cable may resolve
> +the issue.
> +
> +Excessive CRC errors may be observed using Fujitsu 24AWG cable assemblies that
> +Are 10 m or longer or where using a Leoni 15 m/24AWG cable assembly. The CRC
> +errors may be received either by the CX4 Server adapter or at the switch. If
> +this situation occurs, using a different cable assembly may resolve the issue.
> +
> +
> +Jumbo Frames System Requirement
> +-------------------------------
> +Memory allocation failures have been observed on Linux systems with 64 MB
> +of RAM or less that are running Jumbo Frames. If you are using Jumbo
> +Frames, your system may require more than the advertised minimum
> +requirement of 64 MB of system memory.
> +
> +
> +Performance Degradation with Jumbo Frames
> +-----------------------------------------
> +Degradation in throughput performance may be observed in some Jumbo frames
> +environments. If this is observed, increasing the application's socket buffer
> +size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help.
> +See the specific application manual and /usr/src/linux*/Documentation/
> +networking/ip-sysctl.txt for more details.
> +
> +
> +Allocating Rx Buffers when Using Jumbo Frames
> +---------------------------------------------
> +Allocating Rx buffers when using Jumbo Frames on 2.6.x kernels may fail if
> +the available memory is heavily fragmented. This issue may be seen with PCI-X
> +adapters or with packet split disabled. This can be reduced or eliminated
> +by changing the amount of available memory for receive buffer allocation, by
> +increasing /proc/sys/vm/min_free_kbytes.
> +
> +
> +Multiple Interfaces on Same Ethernet Broadcast Network
> +------------------------------------------------------
> +Due to the default ARP behavior on Linux, it is not possible to have
> +one system on two IP networks in the same Ethernet broadcast domain
> +(non-partitioned switch) behave as expected. All Ethernet interfaces
> +will respond to IP traffic for any IP address assigned to the system.
> +This results in unbalanced receive traffic.
> +
> +If you have multiple interfaces in a server, do either of the following:
> +
> + - Turn on ARP filtering by entering::
> +
> echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
>
> - Install the interfaces in separate broadcast domains - either in
> different switches or in a switch partitioned to VLANs.
>
>
> - UDP Stress Test Dropped Packet Issue
> - --------------------------------------
> - Under small packets UDP stress test with 10GbE driver, the Linux system
> - may drop UDP packets due to the fullness of socket buffers. You may want
> - to change the driver's Flow Control variables to the minimum value for
> - controlling packet reception.
> +UDP Stress Test Dropped Packet Issue
> +--------------------------------------
> +Under small packets UDP stress test with 10GbE driver, the Linux system
> +may drop UDP packets due to the fullness of socket buffers. You may want
> +to change the driver's Flow Control variables to the minimum value for
> +controlling packet reception.
>
>
> - Tx Hangs Possible Under Stress
> - ------------------------------
> - Under stress conditions, if TX hangs occur, turning off TSO
> - "ethtool -K eth0 tso off" may resolve the problem.
> +Tx Hangs Possible Under Stress
> +------------------------------
> +Under stress conditions, if TX hangs occur, turning off TSO
> +"ethtool -K eth0 tso off" may resolve the problem.
>
>
> Support
>
More information about the Intel-wired-lan
mailing list