[Intel-wired-lan] [PATCH 2/3] e1000e: ignore status during auto-negotiation
Paul Menzel
pmenzel at molgen.mpg.de
Tue Jan 8 10:15:05 UTC 2019
Dear Jan-Marek,
On 01/08/19 10:59, Jan-Marek Glogowski wrote:
> Am 08.01.19 um 09:31 schrieb Neftin, Sasha:
>> On 1/7/2019 18:37, Jan-Marek Glogowski wrote:
[…]
>> Since you still read 0x40000000 value in the status register it is causing me to think that ME
>> works. Another way I think you should to go ask your vendors for last updated NVM (or with ME
>> disabled if possible) for your HW. Since I219V works as properly, I expected I219-LM without ME
>> works too.
>
> From the logs I sent:
>
> I217-LM: "status 0x40080083 => 1000 Mbps, Full Duplex"
> I219-V: "status 0x40080083 => 1000 Mbps, Full Duplex"
> I219-LM auto-nego ok: "status 0x80083 => 1000 Mbps, Full Duplex"
> I219-LM auto-nego broken: "status 0x40080003 => 10 Mbps, Full Duplex"
>
> According to the BIOS both LM-variants have Intel ME disabled. If I can't trust the BIOS, is there a
> way to check this?
What does intelmetool from the coreboot project show?
$ git clone https://review.coreboot.org/coreboot.git
$ cd coreboot
$ cd util/intelmetoolo
$ make -j
$ sudo ./intelmetool -m
Kind regards,
Paul
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 5174 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.osuosl.org/pipermail/intel-wired-lan/attachments/20190108/5ccc4c52/attachment-0001.p7s>
More information about the Intel-wired-lan
mailing list