[Intel-wired-lan] [PATCH] PCI / ACPI: Don't clear pme_poll on device that has unreliable ACPI wake
Bjorn Helgaas
helgaas at kernel.org
Thu Jan 24 15:15:24 UTC 2019
On Wed, Jan 23, 2019 at 03:17:37PM +0800, Kai Heng Feng wrote:
> > On Jan 23, 2019, at 7:51 AM, Bjorn Helgaas <helgaas at kernel.org> wrote:
> > On Tue, Jan 22, 2019 at 02:45:44PM +0800, Kai-Heng Feng wrote:
> >> There are some e1000e devices can only be woken up from D3 one time, by
> >> plugging ethernet cable. Subsequent cable plugging does set PME bit
> >> correctly, but it still doesn't get woken up.
> >>
> >> Since e1000e connects to the root complex directly, we rely on ACPI to
> >> wake it up. In this case, the GPE from _PRW only works once and stops
> >> working after that.
> >>
> >> So introduce a new PCI quirk, to avoid clearing pme_poll flag for buggy
> >> platform firmwares that have unreliable GPE wake.
> >
> > This quirk applies to all 0x15bb (E1000_DEV_ID_PCH_CNP_I219_LM7) and
> > 0x15bd (E1000_DEV_ID_PCH_CNP_I219_LM6) devices. The e1000e driver
> > claims about a zillion different device IDs.
> >
> > I would be surprised if these two devices are defective but all the
> > others work correctly. Could it be that there is a problem with the
> > wiring on this particular motherboard or with the ACPI _PRW methods
> > (or the way Linux interprets them) in this firmware?
>
> If this is a motherboard issue or platform specific, do you prefer to use
> DMI matches here?
I'm not sure what the problem is yet, so let's hold off on the exact
structure of the fix.
If I understand correctly, e1000e wakeup works once, but doesn't work
after that. Your lspci (from after that first wakeup, from
https://bugzilla.kernel.org/attachment.cgi?id=280691) shows this:
00:14.0 XHC XHCI USB
Flags: PMEClk- DSI- D1- D2- ... PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-
00:1f.3 HDAS audio
Flags: PMEClk- DSI- D1- D2- ... PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-
00:1f.6 GLAN e1000e
Flags: PMEClk- DSI+ D1- D2- ... PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=1 PME+
So the e1000e PME_Status bit is still set, which means it probably
won't generate another PME interrupt, which would explain why wakeup
doesn't work. To test this theory, can you try this:
- sleep
- wakeup via e1000e
# DEV=00:1f.6
# lspci -vvs $DEV
# setpci -s $DEV CAP_PM+4.W
# setpci -s $DEV CAP_PM+4.W=0x8100
- sleep
- attempt another wakeup via e1000e
If this second wakeup works, it would suggest that PME_Status isn't
being cleared correctly. I see code, e.g., in
acpi_setup_gpe_for_wake(), that *looks* like it would arrange to clear
it, but I'm not very familiar with it. Maybe there's some issue with
multiple devices sharing an "implicit notification" situation like
this.
> As for _PRW, it’s shared by USB controller, Audio controller and ethernet.
> Only the ethernet (e1000e) has this issue.
>
> When this issue happens, the e1000e doesn’t get woken up by ethernet cable
> plugging, but inserting a USB device or plugging audio jack can wake up all
> three devices. So I think Linux interprets ACPI correctly here.
>
> Their _PRW here:
> USB controller:
> Scope (_SB.PCI0)
> {
> Device (XDCI)
> {
> Method (_PRW, 0, NotSerialized) // _PRW: Power Resources for Wake
> {
> Return (GPRW (0x6D, 0x04))
> }
>
> Audio controller:
> Scope (_SB.PCI0)
> {
> Device (HDAS)
> {
> …
> Method (_PRW, 0, NotSerialized) // _PRW: Power Resources for Wake
> {
> Return (GPRW (0x6D, 0x04))
> }
>
> Ethernet controller:
> Scope (_SB.PCI0)
> {
> Device (GLAN)
> {
> …
> Method (_PRW, 0, NotSerialized) // _PRW: Power Resources for Wake
> {
> Return (GPRW (0x6D, 0x04))
> }
> }
> }
>
>
> >
> > Would you mind attaching a complete dmesg log and "sudo lspci -vvv"
> > output to the bugzilla, please?
>
> Sure.
>
> Kai-Heng
>
> >
> >> Signed-off-by: Kai-Heng Feng <kai.heng.feng at canonical.com>
> >> ---
> >> drivers/pci/pci-acpi.c | 2 +-
> >> drivers/pci/quirks.c | 8 ++++++++
> >> include/linux/pci.h | 1 +
> >> 3 files changed, 10 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
> >> index e1949f7efd9c..184e2fc8a294 100644
> >> --- a/drivers/pci/pci-acpi.c
> >> +++ b/drivers/pci/pci-acpi.c
> >> @@ -430,7 +430,7 @@ static void pci_acpi_wake_dev(struct acpi_device_wakeup_context *context)
> >>
> >> pci_dev = to_pci_dev(context->dev);
> >>
> >> - if (pci_dev->pme_poll)
> >> + if (pci_dev->pme_poll && !pci_dev->unreliable_acpi_wake)
> >> pci_dev->pme_poll = false;
> >>
> >> if (pci_dev->current_state == PCI_D3cold) {
> >> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> >> index b0a413f3f7ca..ed4863496fa8 100644
> >> --- a/drivers/pci/quirks.c
> >> +++ b/drivers/pci/quirks.c
> >> @@ -4948,6 +4948,14 @@ DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_AMD, PCI_ANY_ID,
> >> DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
> >> PCI_CLASS_MULTIMEDIA_HD_AUDIO, 8, quirk_gpu_hda);
> >>
> >> +static void quirk_unreliable_acpi_wake(struct pci_dev *pdev)
> >> +{
> >> + pci_info(pdev, "ACPI Wake unreliable, always poll PME\n");
> >> + pdev->unreliable_acpi_wake = 1;
> >> +}
> >> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x15bb, quirk_unreliable_acpi_wake);
> >> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x15bd, quirk_unreliable_acpi_wake);
> >> +
> >> /*
> >> * Some IDT switches incorrectly flag an ACS Source Validation error on
> >> * completions for config read requests even though PCIe r4.0, sec
> >> diff --git a/include/linux/pci.h b/include/linux/pci.h
> >> index 65f1d8c2f082..d22065c1576f 100644
> >> --- a/include/linux/pci.h
> >> +++ b/include/linux/pci.h
> >> @@ -331,6 +331,7 @@ struct pci_dev {
> >> unsigned int pme_support:5; /* Bitmask of states from which PME#
> >> can be generated */
> >> unsigned int pme_poll:1; /* Poll device's PME status bit */
> >> + unsigned int unreliable_acpi_wake:1; /* ACPI Wake doesn't always work */
> >> unsigned int d1_support:1; /* Low power state D1 is supported */
> >> unsigned int d2_support:1; /* Low power state D2 is supported */
> >> unsigned int no_d1d2:1; /* D1 and D2 are forbidden */
> >> --
> >> 2.17.1
More information about the Intel-wired-lan
mailing list