[Intel-wired-lan] [PATCH v3] e1000e: PCIm function state support

Neftin, Sasha sasha.neftin at intel.com
Tue Jun 25 15:15:08 UTC 2019


On 6/25/2019 17:39, Vitaly Lifshits wrote:
> Due to commit: 5d8682588605 ("[misc] mei: me: allow runtime
> 			pm for platform with D0i3")
> When disconnecting the cable and reconnecting it the NIC
> enters DMoff state. This caused wrong link indication
> and duplex mismatch. This bug is described in:
> https://bugzilla.redhat.com/show_bug.cgi?id=1689436
> 
> Checking PCIm function state and performing PHY reset after a
> timeout in watchdog task solves this issue.
> 
> Signed-off-by: Vitaly Lifshits <vitaly.lifshits at intel.com>
> ---
> 
> V2: Fixed typos in commit massage
> V3: Fixed minor typo
> ---
>   drivers/net/ethernet/intel/e1000e/defines.h |  3 +++
>   drivers/net/ethernet/intel/e1000e/netdev.c  | 18 +++++++++++++++++-
>   2 files changed, 20 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
> index fd550dee4982..13877fe300f1 100644
> --- a/drivers/net/ethernet/intel/e1000e/defines.h
> +++ b/drivers/net/ethernet/intel/e1000e/defines.h
> @@ -222,6 +222,9 @@
>   #define E1000_STATUS_PHYRA      0x00000400      /* PHY Reset Asserted */
>   #define E1000_STATUS_GIO_MASTER_ENABLE	0x00080000	/* Master Req status */
>   
> +/* PCIm function state */
> +#define E1000_STATUS_PCIM_STATE         0x40000000
> +
>   #define HALF_DUPLEX 1
>   #define FULL_DUPLEX 2
>   
> diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
> index b081a1ef6859..c6a10fd30e4e 100644
> --- a/drivers/net/ethernet/intel/e1000e/netdev.c
> +++ b/drivers/net/ethernet/intel/e1000e/netdev.c
> @@ -5173,8 +5173,9 @@ static void e1000_watchdog_task(struct work_struct *work)
>   	struct e1000_mac_info *mac = &adapter->hw.mac;
>   	struct e1000_phy_info *phy = &adapter->hw.phy;
>   	struct e1000_ring *tx_ring = adapter->tx_ring;
> +	u32 dmoff_exit_timeout = 100, tries = 0;
>   	struct e1000_hw *hw = &adapter->hw;
> -	u32 link, tctl;
> +	u32 link, tctl, pcim_state;
>   
>   	if (test_bit(__E1000_DOWN, &adapter->state))
>   		return;
> @@ -5199,6 +5200,21 @@ static void e1000_watchdog_task(struct work_struct *work)
>   			/* Cancel scheduled suspend requests. */
>   			pm_runtime_resume(netdev->dev.parent);
>   
> +			/* Checking if MAC is in DMoff state*/
> +			pcim_state = er32(STATUS);
> +			while (pcim_state & E1000_STATUS_PCIM_STATE) {
> +				if (tries++ == dmoff_exit_timeout) {
> +					e_dbg("Error in exiting dmoff\n");
> +					break;
> +				}
> +				usleep_range(10000, 20000);
> +				pcim_state = er32(STATUS);
> +
> +				/* Checking if MAC exited DMoff state */
> +				if (!(pcim_state & E1000_STATUS_PCIM_STATE))
> +					e1000_phy_hw_reset(&adapter->hw);
> +			}
> +
>   			/* update snapshot of PHY registers on LSC */
>   			e1000_phy_read_status(adapter);
>   			mac->ops.get_link_up_info(&adapter->hw,
> 
Thanks Vitalik
Acked-by: Sasha Neftin <sasha.neftin at intel.com>


More information about the Intel-wired-lan mailing list