[Intel-wired-lan] [PATCH] i40e: Check if transceiver implements DDM before access
Mauro S. M. Rodrigues
maurosr at linux.vnet.ibm.com
Thu Jul 18 17:52:02 UTC 2019
Similar to the ixgbe issue fixed in:
655c91414579 ("ixgbe: Check DDM existence in transceiver before access)
i40e has the same issue when reading eeprom from SFP's module that comply
with SFF-8472 but not implement the Digital Diagnostic Monitoring (DDM)
interface described in it. The existence of such area is specified by bit
6 of byte 92, set to 1 if implemented.
Without this patch, due to not checking this bit i40e fails to read SFP
module's eeprom with the follow message:
ethtool -m enP51p1s0f0
Cannot get Module EEPROM data: Input/output error
Because it fails to read the additional 256 bytes in which it was assumed
to exist the DDM data.
Signed-off-by: "Mauro S. M. Rodrigues" <maurosr at linux.vnet.ibm.com>
---
drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 6 ++++++
drivers/net/ethernet/intel/i40e/i40e_type.h | 1 +
2 files changed, 7 insertions(+)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 527eb52c5401..e456e2122fea 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -5123,6 +5123,12 @@ static int i40e_get_module_info(struct net_device *netdev,
/* Module is not SFF-8472 compliant */
modinfo->type = ETH_MODULE_SFF_8079;
modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
+ } else if (!(sff8472_swap & I40E_MODULE_SFF_DDM_IMPLEMENTED)) {
+ /* Module is SFF-8472 compliant but doesn't implemend Digital Diagnostic
+ * Monitoring (DDM).
+ */
+ modinfo->type = ETH_MODULE_SFF_8079;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
} else {
modinfo->type = ETH_MODULE_SFF_8472;
modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h
index 8f43aa47c263..2a6219d66771 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_type.h
@@ -443,6 +443,7 @@ struct i40e_nvm_access {
#define I40E_MODULE_SFF_8472_COMP 0x5E
#define I40E_MODULE_SFF_8472_SWAP 0x5C
#define I40E_MODULE_SFF_ADDR_MODE 0x04
+#define I40E_MODULE_SFF_DDM_IMPLEMENTED 0x40
#define I40E_MODULE_TYPE_QSFP_PLUS 0x0D
#define I40E_MODULE_TYPE_QSFP28 0x11
#define I40E_MODULE_QSFP_MAX_LEN 640
--
2.21.0
More information about the Intel-wired-lan
mailing list