[Intel-wired-lan] [PATCH v2 1/3] igb: Add UDP segmentation offload support

[Alexander Duyck]

On Thu, 2019-10-10 at 20:25 -0400, Josh Hunt wrote:
> Based on a series from Alexander Duyck this change adds UDP segmentation
> offload support to the igb driver.
> 
> CC: Alexander Duyck <alexander.h.duyck at intel.com>
> CC: Willem de Bruijn <willemb at google.com>
> Signed-off-by: Josh Hunt <johunt at akamai.com>
> ---
>  drivers/net/ethernet/intel/igb/e1000_82575.h |  1 +
>  drivers/net/ethernet/intel/igb/igb_main.c    | 23 +++++++++++++++++------
>  2 files changed, 18 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.h b/drivers/net/ethernet/intel/igb/e1000_82575.h
> index 6ad775b1a4c5..63ec253ac788 100644
> --- a/drivers/net/ethernet/intel/igb/e1000_82575.h
> +++ b/drivers/net/ethernet/intel/igb/e1000_82575.h
> @@ -127,6 +127,7 @@ struct e1000_adv_tx_context_desc {
>  };
>  
>  #define E1000_ADVTXD_MACLEN_SHIFT    9  /* Adv ctxt desc mac len shift */
> +#define E1000_ADVTXD_TUCMD_L4T_UDP 0x00000000  /* L4 Packet TYPE of UDP */
>  #define E1000_ADVTXD_TUCMD_IPV4    0x00000400  /* IP Packet Type: 1=IPv4 */
>  #define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800  /* L4 Packet TYPE of TCP */
>  #define E1000_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 packet TYPE of SCTP */
> diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
> index 105b0624081a..4131bc8b079e 100644
> --- a/drivers/net/ethernet/intel/igb/igb_main.c
> +++ b/drivers/net/ethernet/intel/igb/igb_main.c
> @@ -2516,6 +2516,7 @@ igb_features_check(struct sk_buff *skb, struct net_device *dev,
>  	if (unlikely(mac_hdr_len > IGB_MAX_MAC_HDR_LEN))
>  		return features & ~(NETIF_F_HW_CSUM |
>  				    NETIF_F_SCTP_CRC |
> +				    NETIF_F_GSO_UDP_L4 |
>  				    NETIF_F_HW_VLAN_CTAG_TX |
>  				    NETIF_F_TSO |
>  				    NETIF_F_TSO6);
> @@ -2524,6 +2525,7 @@ igb_features_check(struct sk_buff *skb, struct net_device *dev,
>  	if (unlikely(network_hdr_len >  IGB_MAX_NETWORK_HDR_LEN))
>  		return features & ~(NETIF_F_HW_CSUM |
>  				    NETIF_F_SCTP_CRC |
> +				    NETIF_F_GSO_UDP_L4 |
>  				    NETIF_F_TSO |
>  				    NETIF_F_TSO6);
>  
> @@ -3120,7 +3122,7 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
>  			    NETIF_F_HW_CSUM;
>  
>  	if (hw->mac.type >= e1000_82576)
> -		netdev->features |= NETIF_F_SCTP_CRC;
> +		netdev->features |= NETIF_F_SCTP_CRC | NETIF_F_GSO_UDP_L4;
>  
>  	if (hw->mac.type >= e1000_i350)
>  		netdev->features |= NETIF_F_HW_TC;
> @@ -5694,6 +5696,7 @@ static int igb_tso(struct igb_ring *tx_ring,
>  	} ip;
>  	union {
>  		struct tcphdr *tcp;
> +		struct udphdr *udp;
>  		unsigned char *hdr;
>  	} l4;
>  	u32 paylen, l4_offset;
> @@ -5713,7 +5716,8 @@ static int igb_tso(struct igb_ring *tx_ring,
>  	l4.hdr = skb_checksum_start(skb);
>  
>  	/* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
> -	type_tucmd = E1000_ADVTXD_TUCMD_L4T_TCP;
> +	type_tucmd = (!(skb_shinfo(skb)->gso_type & SKB_GSO_UDP_L4)) ?
> +		      E1000_ADVTXD_TUCMD_L4T_TCP : E1000_ADVTXD_TUCMD_L4T_UDP;

The logic here seems a bit convoluted. Instead of testing for
'!SKB_GSO_UDP_L4' why not just make L4T_UDP the first option and drop the
'!'? That will make the TCP offload the default case rather than the UDP
offload.

The same applies to the other 2 patches.

>  	/* initialize outer IP header fields */
>  	if (ip.v4->version == 4) {
> @@ -5741,12 +5745,19 @@ static int igb_tso(struct igb_ring *tx_ring,
>  	/* determine offset of inner transport header */
>  	l4_offset = l4.hdr - skb->data;
>  
> -	/* compute length of segmentation header */
> -	*hdr_len = (l4.tcp->doff * 4) + l4_offset;
> -
>  	/* remove payload length from inner checksum */
>  	paylen = skb->len - l4_offset;
> -	csum_replace_by_diff(&l4.tcp->check, htonl(paylen));
> +	if (type_tucmd & E1000_ADVTXD_TUCMD_L4T_TCP) {
> +		/* compute length of segmentation header */
> +		*hdr_len = (l4.tcp->doff * 4) + l4_offset;
> +		csum_replace_by_diff(&l4.tcp->check,
> +			(__force __wsum)htonl(paylen));
> +	} else {
> +		/* compute length of segmentation header */
> +		*hdr_len = sizeof(*l4.udp) + l4_offset;
> +		csum_replace_by_diff(&l4.udp->check,
> +				     (__force __wsum)htonl(paylen));
> +	}
>  
>  	/* update gso size and bytecount with header size */
>  	first->gso_segs = skb_shinfo(skb)->gso_segs;