[Intel-wired-lan] [PATCH net 1/2] i40e: need_wakeup flag might not be set for Tx
Bowers, AndrewX
andrewx.bowers at intel.com
Sat Nov 9 00:01:29 UTC 2019
> -----Original Message-----
> From: Intel-wired-lan [mailto:intel-wired-lan-bounces at osuosl.org] On
> Behalf Of Magnus Karlsson
> Sent: Friday, November 8, 2019 11:58 AM
> To: Karlsson, Magnus <magnus.karlsson at intel.com>; Topel, Bjorn
> <bjorn.topel at intel.com>; intel-wired-lan at lists.osuosl.org
> Cc: maciejromanfijalkowski at gmail.com; Fijalkowski, Maciej
> <maciej.fijalkowski at intel.com>; netdev at vger.kernel.org
> Subject: [Intel-wired-lan] [PATCH net 1/2] i40e: need_wakeup flag might not
> be set for Tx
>
> The need_wakeup flag for Tx might not be set for AF_XDP sockets that are
> only used to send packets. This happens if there is at least one outstanding
> packet that has not been completed by the hardware and we get that
> corresponding completion (which will not generate an interrupt since
> interrupts are disabled in the napi poll loop) between the time we stopped
> processing the Tx completions and interrupts are enabled again. In this case,
> the need_wakeup flag will have been cleared at the end of the Tx
> completion processing as we believe we will get an interrupt from the
> outstanding completion at a later point in time. But if this completion
> interrupt occurs before interrupts are enable, we lose it and should at that
> point really have set the need_wakeup flag since there are no more
> outstanding completions that can generate an interrupt to continue the
> processing. When this happens, user space will see a Tx queue
> need_wakeup of 0 and skip issuing a syscall, which means will never get into
> the Tx processing again and we have a deadlock.
>
> This patch introduces a quick fix for this issue by just setting the
> need_wakeup flag for Tx to 1 all the time. I am working on a proper fix for
> this that will toggle the flag appropriately, but it is more challenging than I
> anticipated and I am afraid that this patch will not be completed before the
> merge window closes, therefore this easier fix for now. This fix has a
> negative performance impact in the range of 0% to 4%. Towards the higher
> end of the scale if you have driver and application on the same core and issue
> a lot of packets, and towards no negative impact if you use two cores, lower
> transmission speeds and/or a workload that also receives packets.
>
> Signed-off-by: Magnus Karlsson <magnus.karlsson at intel.com>
> ---
> drivers/net/ethernet/intel/i40e/i40e_xsk.c | 10 ++--------
> 1 file changed, 2 insertions(+), 8 deletions(-)
Tested-by: Andrew Bowers <andrewx.bowers at intel.com>
More information about the Intel-wired-lan
mailing list