[Intel-wired-lan] ixgbe: "Warning firmware error detected FWSM: 0xFFFFFFFF"
Fujinaka, Todd
todd.fujinaka at intel.com
Sat Jan 25 00:55:05 UTC 2020
Was the firmware updated or edited somehow?
Or is this a card that's been running and started randomly generating errors?
Todd Fujinaka
Software Application Engineer
Datacenter Engineering Group
Intel Corporation
todd.fujinaka at intel.com
-----Original Message-----
From: Intel-wired-lan <intel-wired-lan-bounces at osuosl.org> On Behalf Of Ben Greear
Sent: Friday, January 24, 2020 11:31 AM
To: intel-wired-lan <intel-wired-lan at lists.osuosl.org>
Subject: [Intel-wired-lan] ixgbe: "Warning firmware error detected FWSM: 0xFFFFFFFF"
Hello,
Anyone know what this problem means?
# dmesg|grep ixg
[ 3.840480] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
[ 3.840481] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 4.535677] ixgbe 0000:01:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0
[ 4.633347] ixgbe 0000:01:00.0: 31.504 Gb/s available PCIe bandwidth (8 GT/s x4 link)
[ 4.745337] ixgbe 0000:01:00.0: MAC: 4, PHY: 0, PBA No: H86377-005
[ 4.745338] ixgbe 0000:01:00.0: 9c:69:b4:60:e4:a6
[ 4.904379] ixgbe 0000:01:00.0: Intel(R) 10 Gigabit Network Connection
[ 4.904413] libphy: ixgbe-mdio: probed
[ 5.610158] ixgbe 0000:01:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0
[ 5.709523] ixgbe 0000:01:00.1: 31.504 Gb/s available PCIe bandwidth (8 GT/s x4 link)
[ 5.823067] ixgbe 0000:01:00.1: MAC: 4, PHY: 0, PBA No: H86377-005
[ 5.823071] ixgbe 0000:01:00.1: 9c:69:b4:60:e4:a7
[ 5.986413] ixgbe 0000:01:00.1: Intel(R) 10 Gigabit Network Connection
[ 5.986444] libphy: ixgbe-mdio: probed
[ 5.987671] ixgbe 0000:01:00.0 enp1s0f0: renamed from eth0
[ 5.995744] ixgbe 0000:01:00.1 enp1s0f1: renamed from eth1
[ 10.086982] ixgbe 0000:01:00.0 eth2: renamed from enp1s0f0
[ 10.098434] ixgbe 0000:01:00.1 eth3: renamed from enp1s0f1
[ 30.868089] ixgbe 0000:01:00.0: registered PHC device on eth2
[ 31.327796] ixgbe 0000:01:00.1: registered PHC device on eth3
[ 47.567801] ixgbe 0000:01:00.0: Adapter removed
[ 47.571172] ixgbe 0000:01:00.0: Warning firmware error detected FWSM: 0xFFFFFFFF
[ 47.571188] ixgbe 0000:01:00.0: Firmware recovery mode detected. Limiting functionality. Refer to the Intel(R) Ethernet Adapters and Devices User Guide for
details on firmware recovery mode.
[ 47.588245] ixgbe 0000:01:00.0: removed PHC on eth2
[ 48.056546] ixgbe 0000:01:00.1: Adapter removed
[ 48.059916] ixgbe 0000:01:00.1: Warning firmware error detected FWSM: 0xFFFFFFFF
[ 48.059932] ixgbe 0000:01:00.1: Firmware recovery mode detected. Limiting functionality. Refer to the Intel(R) Ethernet Adapters and Devices User Guide for
details on firmware recovery mode.
[ 48.076589] ixgbe 0000:01:00.1: removed PHC on eth3
Thanks,
Ben
--
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
Intel-wired-lan mailing list
Intel-wired-lan at osuosl.org
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
More information about the Intel-wired-lan
mailing list