[Intel-wired-lan] [next-queue v4] igc: Add initial EEE support
Jeff Kirsher
jeffrey.t.kirsher at intel.com
Wed May 27 20:51:32 UTC 2020
From: Sasha Neftin <sasha.neftin at intel.com>
IEEE802.3az-2010 Energy Efficient Ethernet has been
approved as standard (September 2010) and the driver
can enable and disable it via ethtool.
Disable the feature by default on parts which support it.
Add enable/disable eee options.
tx-lpi, tx-timer and advertise not supported yet.
v2:
Rid of inverted logic and replace eee_disable boolean with
eee_enable in device specification.
Address community comments.
v3:
Remove pointless ret_val from _set_eee method
Minor comment fix
v4:
Fixed conflicts when applying to next-queue tree
Signed-off-by: Sasha Neftin <sasha.neftin at intel.com>
Reviewed-by: Andre Guedes <andre.guedes at intel.com>
---
drivers/net/ethernet/intel/igc/igc.h | 4 +
drivers/net/ethernet/intel/igc/igc_defines.h | 10 ++
drivers/net/ethernet/intel/igc/igc_ethtool.c | 97 ++++++++++++++++++++
drivers/net/ethernet/intel/igc/igc_hw.h | 1 +
drivers/net/ethernet/intel/igc/igc_i225.c | 56 +++++++++++
drivers/net/ethernet/intel/igc/igc_i225.h | 2 +
drivers/net/ethernet/intel/igc/igc_main.c | 16 ++++
drivers/net/ethernet/intel/igc/igc_regs.h | 5 +
8 files changed, 191 insertions(+)
diff --git a/drivers/net/ethernet/intel/igc/igc.h b/drivers/net/ethernet/intel/igc/igc.h
index 5dbc5a156626..ce3ca6d4a6de 100644
--- a/drivers/net/ethernet/intel/igc/igc.h
+++ b/drivers/net/ethernet/intel/igc/igc.h
@@ -117,6 +117,9 @@ struct igc_ring {
struct igc_adapter {
struct net_device *netdev;
+ struct ethtool_eee eee;
+ u16 eee_advert;
+
unsigned long state;
unsigned int flags;
unsigned int num_q_vectors;
@@ -256,6 +259,7 @@ extern char igc_driver_version[];
#define IGC_FLAG_MEDIA_RESET BIT(10)
#define IGC_FLAG_MAS_ENABLE BIT(12)
#define IGC_FLAG_HAS_MSIX BIT(13)
+#define IGC_FLAG_EEE BIT(14)
#define IGC_FLAG_VLAN_PROMISC BIT(15)
#define IGC_FLAG_RX_LEGACY BIT(16)
#define IGC_FLAG_TSN_QBV_ENABLED BIT(17)
diff --git a/drivers/net/ethernet/intel/igc/igc_defines.h b/drivers/net/ethernet/intel/igc/igc_defines.h
index 80b664e64465..a7baadc49d84 100644
--- a/drivers/net/ethernet/intel/igc/igc_defines.h
+++ b/drivers/net/ethernet/intel/igc/igc_defines.h
@@ -512,4 +512,14 @@
/* Maximum size of the MTA register table in all supported adapters */
#define MAX_MTA_REG 128
+/* EEE defines */
+#define IGC_IPCNFG_EEE_2_5G_AN 0x00000010 /* IPCNFG EEE Ena 2.5G AN */
+#define IGC_IPCNFG_EEE_1G_AN 0x00000008 /* IPCNFG EEE Ena 1G AN */
+#define IGC_IPCNFG_EEE_100M_AN 0x00000004 /* IPCNFG EEE Ena 100M AN */
+#define IGC_EEER_EEE_NEG 0x20000000 /* EEE capability nego */
+#define IGC_EEER_TX_LPI_EN 0x00010000 /* EEER Tx LPI Enable */
+#define IGC_EEER_RX_LPI_EN 0x00020000 /* EEER Rx LPI Enable */
+#define IGC_EEER_LPI_FC 0x00040000 /* EEER Ena on Flow Cntrl */
+#define IGC_EEE_SU_LPI_CLK_STP 0x00800000 /* EEE LPI Clock Stop */
+
#endif /* _IGC_DEFINES_H_ */
diff --git a/drivers/net/ethernet/intel/igc/igc_ethtool.c b/drivers/net/ethernet/intel/igc/igc_ethtool.c
index a938ec8db681..75c127fc766b 100644
--- a/drivers/net/ethernet/intel/igc/igc_ethtool.c
+++ b/drivers/net/ethernet/intel/igc/igc_ethtool.c
@@ -4,6 +4,7 @@
/* ethtool support for igc */
#include <linux/if_vlan.h>
#include <linux/pm_runtime.h>
+#include <linux/mdio.h>
#include "igc.h"
#include "igc_diag.h"
@@ -1549,6 +1550,100 @@ static int igc_ethtool_set_priv_flags(struct net_device *netdev, u32 priv_flags)
return 0;
}
+static int igc_ethtool_get_eee(struct net_device *netdev,
+ struct ethtool_eee *edata)
+{
+ struct igc_adapter *adapter = netdev_priv(netdev);
+ struct igc_hw *hw = &adapter->hw;
+ u32 eeer;
+
+ if (hw->dev_spec._base.eee_enable)
+ edata->advertised =
+ mmd_eee_adv_to_ethtool_adv_t(adapter->eee_advert);
+
+ *edata = adapter->eee;
+ edata->supported = SUPPORTED_Autoneg;
+ netdev_info(netdev,
+ "Supported EEE link modes: 100baseT/Full, 1000baseT/Full, 2500baseT/Full\n");
+
+ eeer = rd32(IGC_EEER);
+
+ /* EEE status on negotiated link */
+ if (eeer & IGC_EEER_EEE_NEG)
+ edata->eee_active = true;
+
+ if (eeer & IGC_EEER_TX_LPI_EN)
+ edata->tx_lpi_enabled = true;
+
+ edata->eee_enabled = hw->dev_spec._base.eee_enable;
+
+ edata->advertised = SUPPORTED_Autoneg;
+ edata->lp_advertised = SUPPORTED_Autoneg;
+
+ /* Report correct negotiated EEE status for devices that
+ * wrongly report EEE at half-duplex
+ */
+ if (adapter->link_duplex == HALF_DUPLEX) {
+ edata->eee_enabled = false;
+ edata->eee_active = false;
+ edata->tx_lpi_enabled = false;
+ edata->advertised &= ~edata->advertised;
+ }
+
+ return 0;
+}
+
+static int igc_ethtool_set_eee(struct net_device *netdev,
+ struct ethtool_eee *edata)
+{
+ struct igc_adapter *adapter = netdev_priv(netdev);
+ struct igc_hw *hw = &adapter->hw;
+ struct ethtool_eee eee_curr;
+ s32 ret_val;
+
+ memset(&eee_curr, 0, sizeof(struct ethtool_eee));
+
+ ret_val = igc_ethtool_get_eee(netdev, &eee_curr);
+ if (ret_val) {
+ netdev_err(netdev,
+ "Problem setting EEE advertisement options\n");
+ return -EINVAL;
+ }
+
+ if (eee_curr.eee_enabled) {
+ if (eee_curr.tx_lpi_enabled != edata->tx_lpi_enabled) {
+ netdev_err(netdev,
+ "Setting EEE tx-lpi is not supported\n");
+ return -EINVAL;
+ }
+
+ /* Tx LPI timer is not implemented currently */
+ if (edata->tx_lpi_timer) {
+ netdev_err(netdev,
+ "Setting EEE Tx LPI timer is not supported\n");
+ return -EINVAL;
+ }
+ } else if (!edata->eee_enabled) {
+ netdev_err(netdev,
+ "Setting EEE options are not supported with EEE disabled\n");
+ return -EINVAL;
+ }
+
+ adapter->eee_advert = ethtool_adv_to_mmd_eee_adv_t(edata->advertised);
+ if (hw->dev_spec._base.eee_enable != edata->eee_enabled) {
+ hw->dev_spec._base.eee_enable = edata->eee_enabled;
+ adapter->flags |= IGC_FLAG_EEE;
+
+ /* reset link */
+ if (netif_running(netdev))
+ igc_reinit_locked(adapter);
+ else
+ igc_reset(adapter);
+ }
+
+ return 0;
+}
+
static int igc_ethtool_begin(struct net_device *netdev)
{
struct igc_adapter *adapter = netdev_priv(netdev);
@@ -1830,6 +1925,8 @@ static const struct ethtool_ops igc_ethtool_ops = {
.set_channels = igc_ethtool_set_channels,
.get_priv_flags = igc_ethtool_get_priv_flags,
.set_priv_flags = igc_ethtool_set_priv_flags,
+ .get_eee = igc_ethtool_get_eee,
+ .set_eee = igc_ethtool_set_eee,
.begin = igc_ethtool_begin,
.complete = igc_ethtool_complete,
.get_link_ksettings = igc_ethtool_get_link_ksettings,
diff --git a/drivers/net/ethernet/intel/igc/igc_hw.h b/drivers/net/ethernet/intel/igc/igc_hw.h
index af34ae310327..2ab7d9fab6af 100644
--- a/drivers/net/ethernet/intel/igc/igc_hw.h
+++ b/drivers/net/ethernet/intel/igc/igc_hw.h
@@ -191,6 +191,7 @@ struct igc_fc_info {
struct igc_dev_spec_base {
bool clear_semaphore_once;
+ bool eee_enable;
};
struct igc_hw {
diff --git a/drivers/net/ethernet/intel/igc/igc_i225.c b/drivers/net/ethernet/intel/igc/igc_i225.c
index c25f555aaf82..c67bfbe92074 100644
--- a/drivers/net/ethernet/intel/igc/igc_i225.c
+++ b/drivers/net/ethernet/intel/igc/igc_i225.c
@@ -488,3 +488,59 @@ s32 igc_init_nvm_params_i225(struct igc_hw *hw)
}
return 0;
}
+
+/**
+ * igc_set_eee_i225 - Enable/disable EEE support
+ * @hw: pointer to the HW structure
+ * @adv2p5G: boolean flag enabling 2.5G EEE advertisement
+ * @adv1G: boolean flag enabling 1G EEE advertisement
+ * @adv100M: boolean flag enabling 100M EEE advertisement
+ *
+ * Enable/disable EEE based on setting in dev_spec structure.
+ **/
+s32 igc_set_eee_i225(struct igc_hw *hw, bool adv2p5G, bool adv1G,
+ bool adv100M)
+{
+ u32 ipcnfg, eeer;
+
+ ipcnfg = rd32(IGC_IPCNFG);
+ eeer = rd32(IGC_EEER);
+
+ /* enable or disable per user setting */
+ if (hw->dev_spec._base.eee_enable) {
+ u32 eee_su = rd32(IGC_EEE_SU);
+
+ if (adv100M)
+ ipcnfg |= IGC_IPCNFG_EEE_100M_AN;
+ else
+ ipcnfg &= ~IGC_IPCNFG_EEE_100M_AN;
+
+ if (adv1G)
+ ipcnfg |= IGC_IPCNFG_EEE_1G_AN;
+ else
+ ipcnfg &= ~IGC_IPCNFG_EEE_1G_AN;
+
+ if (adv2p5G)
+ ipcnfg |= IGC_IPCNFG_EEE_2_5G_AN;
+ else
+ ipcnfg &= ~IGC_IPCNFG_EEE_2_5G_AN;
+
+ eeer |= (IGC_EEER_TX_LPI_EN | IGC_EEER_RX_LPI_EN |
+ IGC_EEER_LPI_FC);
+
+ /* This bit should not be set in normal operation. */
+ if (eee_su & IGC_EEE_SU_LPI_CLK_STP)
+ hw_dbg("LPI Clock Stop Bit should not be set!\n");
+ } else {
+ ipcnfg &= ~(IGC_IPCNFG_EEE_2_5G_AN | IGC_IPCNFG_EEE_1G_AN |
+ IGC_IPCNFG_EEE_100M_AN);
+ eeer &= ~(IGC_EEER_TX_LPI_EN | IGC_EEER_RX_LPI_EN |
+ IGC_EEER_LPI_FC);
+ }
+ wr32(IGC_IPCNFG, ipcnfg);
+ wr32(IGC_EEER, eeer);
+ rd32(IGC_IPCNFG);
+ rd32(IGC_EEER);
+
+ return IGC_SUCCESS;
+}
diff --git a/drivers/net/ethernet/intel/igc/igc_i225.h b/drivers/net/ethernet/intel/igc/igc_i225.h
index 7b66e1f9c0e6..04759e076a9e 100644
--- a/drivers/net/ethernet/intel/igc/igc_i225.h
+++ b/drivers/net/ethernet/intel/igc/igc_i225.h
@@ -9,5 +9,7 @@ void igc_release_swfw_sync_i225(struct igc_hw *hw, u16 mask);
s32 igc_init_nvm_params_i225(struct igc_hw *hw);
bool igc_get_flash_presence_i225(struct igc_hw *hw);
+s32 igc_set_eee_i225(struct igc_hw *hw, bool adv2p5G, bool adv1G,
+ bool adv100M);
#endif
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 4a7a9b00e60f..26f5ce23e255 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -105,6 +105,9 @@ void igc_reset(struct igc_adapter *adapter)
if (hw->mac.ops.init_hw(hw))
netdev_err(dev, "Error on hardware initialization\n");
+ /* Re-establish EEE setting */
+ igc_set_eee_i225(hw, true, true, true);
+
if (!netif_running(adapter->netdev))
igc_power_down_link(adapter);
@@ -4259,6 +4262,15 @@ static void igc_watchdog_task(struct work_struct *work)
(ctrl & IGC_CTRL_RFCE) ? "RX" :
(ctrl & IGC_CTRL_TFCE) ? "TX" : "None");
+ /* disable EEE if enabled */
+ if ((adapter->flags & IGC_FLAG_EEE) &&
+ adapter->link_duplex == HALF_DUPLEX) {
+ netdev_info(netdev,
+ "EEE Disabled: unsupported at half duplex. Re-enable using ethtool when at full duplex\n");
+ adapter->hw.dev_spec._base.eee_enable = false;
+ adapter->flags &= ~IGC_FLAG_EEE;
+ }
+
/* check if SmartSpeed worked */
igc_check_downshift(hw);
if (phy->speed_downgraded)
@@ -5190,6 +5202,10 @@ static int igc_probe(struct pci_dev *pdev,
netdev_info(netdev, "MAC: %pM\n", netdev->dev_addr);
dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NEVER_SKIP);
+ /* Disable EEE for internal PHY devices */
+ hw->dev_spec._base.eee_enable = false;
+ adapter->flags &= ~IGC_FLAG_EEE;
+ igc_set_eee_i225(hw, false, false, false);
pm_runtime_put_noidle(&pdev->dev);
diff --git a/drivers/net/ethernet/intel/igc/igc_regs.h b/drivers/net/ethernet/intel/igc/igc_regs.h
index 7ac3b611708c..5a4873dddcbf 100644
--- a/drivers/net/ethernet/intel/igc/igc_regs.h
+++ b/drivers/net/ethernet/intel/igc/igc_regs.h
@@ -249,6 +249,11 @@
/* Wake Up packet memory */
#define IGC_WUPM_REG(_i) (0x05A00 + ((_i) * 4))
+/* Energy Efficient Ethernet "EEE" registers */
+#define IGC_EEER 0x0E30 /* Energy Efficient Ethernet "EEE"*/
+#define IGC_IPCNFG 0x0E38 /* Internal PHY Configuration */
+#define IGC_EEE_SU 0x0E34 /* EEE Setup */
+
/* forward declaration */
struct igc_hw;
u32 igc_rd32(struct igc_hw *hw, u32 reg);
--
2.26.2
More information about the Intel-wired-lan
mailing list