[Intel-wired-lan] [PATCH S46 9/9] ice: Ignore EMODE when setting PHY config

[Bowers, AndrewX]

> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces at osuosl.org> On Behalf Of
> Tony Nguyen
> Sent: Friday, May 15, 2020 5:55 PM
> To: intel-wired-lan at lists.osuosl.org
> Subject: [Intel-wired-lan] [PATCH S46 9/9] ice: Ignore EMODE when setting
> PHY config
> 
> From: Chinh T Cao <chinh.t.cao at intel.com>
> 
> When setting the PHY cfg (CQ cmd 0x0601), if the firmware responds with an
> EMODE error, software will ignore the error as it simply means that
> manageability (ex: BMC) is in control of the link and that the new setting may
> not be applied.
> 
> Signed-off-by: Chinh T Cao <chinh.t.cao at intel.com>
> Signed-off-by: Tony Nguyen <anthony.l.nguyen at intel.com>
> ---
>  drivers/net/ethernet/intel/ice/ice_adminq_cmd.h | 1 +
>  drivers/net/ethernet/intel/ice/ice_common.c     | 7 ++++++-
>  drivers/net/ethernet/intel/ice/ice_main.c       | 2 ++
>  3 files changed, 9 insertions(+), 1 deletion(-)

Tested-by: Andrew Bowers <andrewx.bowers at intel.com>