[Intel-wired-lan] [PATCH] i40e: detect and log info about pre-recovery mode

[Bowers, AndrewX]

> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces at osuosl.org> On Behalf Of
> Piotr Kwapulinski
> Sent: Tuesday, May 26, 2020 3:56 AM
> To: intel-wired-lan at lists.osuosl.org
> Cc: Kwapulinski, Piotr <piotr.kwapulinski at intel.com>
> Subject: [Intel-wired-lan] [PATCH] i40e: detect and log info about pre-
> recovery mode
> 
> Detect and log information about pre-recovery mode when firmware
> transitions to a recovery mode.
> When a firmware transitions to a recovery mode it stores a number of
> unexpected EMP resets in one of its registers. The number of EMP resets
> ranging from 0x21 to 0x2A indicates that FW transitions to recovery mode.
> Use these values to emit log entry about transition process. Previously the
> pre-recovery mode may not have been detected and there was no log entry
> when NIC was in pre-recovery mode.
> 
> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov at intel.com>
> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski at intel.com>
> ---
>  drivers/net/ethernet/intel/i40e/i40e_main.c   | 74 +++++++++++++------
>  .../net/ethernet/intel/i40e/i40e_register.h   |  2 +
>  2 files changed, 53 insertions(+), 23 deletions(-)

Tested-by: Andrew Bowers <andrewx.bowers at intel.com>