[Intel-wired-lan] [PATCH v1 1/1] igc: Refactor the igc_power_up_link()

[Sasha Neftin]

PHY of the i225 device support only copper mode.
There is no point to check media type in the
igc_power_up_link() method.

Signed-off-by: Sasha Neftin <sasha.neftin at intel.com>
---
 drivers/net/ethernet/intel/igc/igc_main.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index af5e1686f7f2..83c94fa58c40 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -115,8 +115,7 @@ static void igc_power_up_link(struct igc_adapter *adapter)
 {
 	igc_reset_phy(&adapter->hw);
 
-	if (adapter->hw.phy.media_type == igc_media_type_copper)
-		igc_power_up_phy_copper(&adapter->hw);
+	igc_power_up_phy_copper(&adapter->hw);
 
 	igc_setup_link(&adapter->hw);
 }
-- 
2.11.0