[Intel-wired-lan] [PATCH] e1000e: Power cycle phy on PM resume
Kai-Heng Feng
kai.heng.feng at canonical.com
Wed Sep 23 14:44:10 UTC 2020
Hi Andrew,
> On Sep 23, 2020, at 20:17, Andrew Lunn <andrew at lunn.ch> wrote:
>
> On Wed, Sep 23, 2020 at 03:47:51PM +0800, Kai-Heng Feng wrote:
>> We are seeing the following error after S3 resume:
>> [ 704.746874] e1000e 0000:00:1f.6 eno1: Setting page 0x6020
>> [ 704.844232] e1000e 0000:00:1f.6 eno1: MDI Write did not complete
>> [ 704.902817] e1000e 0000:00:1f.6 eno1: Setting page 0x6020
>> [ 704.903075] e1000e 0000:00:1f.6 eno1: reading PHY page 769 (or 0x6020 shifted) reg 0x17
>> [ 704.903281] e1000e 0000:00:1f.6 eno1: Setting page 0x6020
>> [ 704.903486] e1000e 0000:00:1f.6 eno1: writing PHY page 769 (or 0x6020 shifted) reg 0x17
>> [ 704.943155] e1000e 0000:00:1f.6 eno1: MDI Error
>> ...
>> [ 705.108161] e1000e 0000:00:1f.6 eno1: Hardware Error
>>
>> Since we don't know what platform firmware may do to the phy, so let's
>> power cycle the phy upon system resume to resolve the issue.
>>
>> Signed-off-by: Kai-Heng Feng <kai.heng.feng at canonical.com>
>> ---
>> drivers/net/ethernet/intel/e1000e/netdev.c | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
>> index 664e8ccc88d2..c2a87a408102 100644
>> --- a/drivers/net/ethernet/intel/e1000e/netdev.c
>> +++ b/drivers/net/ethernet/intel/e1000e/netdev.c
>> @@ -6968,6 +6968,8 @@ static __maybe_unused int e1000e_pm_resume(struct device *dev)
>> !e1000e_check_me(hw->adapter->pdev->device))
>> e1000e_s0ix_exit_flow(adapter);
>>
>> + e1000_power_down_phy(adapter);
>> +
>
> static void e1000_power_down_phy(struct e1000_adapter *adapter)
> {
> struct e1000_hw *hw = &adapter->hw;
>
> /* Power down the PHY so no link is implied when interface is down *
> * The PHY cannot be powered down if any of the following is true *
> * (a) WoL is enabled
> * (b) AMT is active
> * (c) SoL/IDER session is active
> */
> if (!adapter->wol && hw->mac_type >= e1000_82540 &&
> hw->media_type == e1000_media_type_copper) {
Looks like the the function comes from e1000, drivers/net/ethernet/intel/e1000/e1000_main.c.
However, this patch is for e1000e, so the function with same name is different.
>
> Could it be coming out of S3 because it just received a WoL?
No, the issue can be reproduced by pressing keyboard or rtcwake.
>
> It seems unlikely that it is the MII_CR_POWER_DOWN which is helping,
> since that is an MDIO write itself. Do you actually know how this call
> to e1000_power_down_phy() fixes the issues?
I don't know from hardware's perspective, but I think the comment on e1000_power_down_phy_copper() can give us some insight:
/**
* e1000_power_down_phy_copper - Restore copper link in case of PHY power down
* @hw: pointer to the HW structure
*
* In the case of a PHY power down to save power, or to turn off link during a
* driver unload, or wake on lan is not enabled, restore the link to previous
* settings.
**/
void e1000_power_down_phy_copper(struct e1000_hw *hw)
{
u16 mii_reg = 0;
/* The PHY will retain its settings across a power down/up cycle */
e1e_rphy(hw, MII_BMCR, &mii_reg);
mii_reg |= BMCR_PDOWN;
e1e_wphy(hw, MII_BMCR, mii_reg);
usleep_range(1000, 2000);
}
Kai-Heng
>
> Andrew
More information about the Intel-wired-lan
mailing list