[Intel-wired-lan] ixgbe - only presenting one out of four interfaces on 5.9
ian.kumlien at gmail.com
Fri Oct 16 22:39:11 UTC 2020
On Fri, Oct 16, 2020 at 9:21 PM Jakub Kicinski <kuba at kernel.org> wrote:
> On Fri, 16 Oct 2020 11:35:15 +0200 Ian Kumlien wrote:
> > Adding netdev, someone might have a clue of what to look at...
> > On Mon, Oct 12, 2020 at 9:20 PM Ian Kumlien <ian.kumlien at gmail.com> wrote:
> > >
> > > Hi,
> > >
> > > I was really surprised when i rebooted my firewall and there was
> > > network issues, I was even more surprised when
> > > only one of the four ports of my ixbe (x553) nic was available when booted.
> Just to be sure you mean that the 3 devices are not present in ip link
or ifconfig or /proc etc etc, so yes
> > > You can actually see it dmesg... And i tried some basic looking at
> > > changes to see if it was obvious.... but..
> Showing a full dmesg may be helpful, but looking at what you posted it
> seems like the driver gets past the point where netdev gets registered,
> so the only thing that could fail after that point AFIACT is
> mdiobus_register(). Could be some breakage in MDIO.
Humm... interesting, will have a look at it
> Any chance you could fire up perf, bpftrace and install a kretprobe to
> see what mdiobus_register() returns? You can rebind the device to the
> driver through sysfs.
Do you need a difference between the kernels?
More information about the Intel-wired-lan