[Intel-wired-lan] [PATCH] e1000e: Assign DPM_FLAG_SMART_SUSPEND and DPM_FLAG_MAY_SKIP_RESUME to speed up s2ram

[Chen Yu]

On Thu, Nov 26, 2020 at 08:05:02PM +0800, Kai-Heng Feng wrote:
> 
> 
> > On Nov 26, 2020, at 19:10, Chen Yu <yu.c.chen at intel.com> wrote:
> > 
> > On Thu, Nov 26, 2020 at 02:36:42PM +0800, Kai-Heng Feng wrote:
> >>>> 
> >>>> What about plugging ethernet cable and using WoL after system is suspended?
> >>>> Commit "e1000e: Exclude device from suspend direct complete optimization" was to address that scenario.
> > [cut]
> >> 
> >> I don't think this is right.
> >> Isn't E1000_WUFC_LNKC already set for runtime suspend?
> >> What if WoL doesn't have it set?
> >> 
> > After re-taking a look at your description, please let me elaborate more about the scenario.
> > With this patch applied, and with sysfs wake up disabled, the expected behavior is:
> > 
> > 1. If NIC is not runtime suspended:
> > 1.1 s2ram suspend -> wufc will be set to 0(no WoL settings), suspend(), suspend_late(), suspend_noirq()
> > 1.2 s2ram resume  -> NIC resumes normaly
> > 
> > 2. If NIC is runtime suspended:
> > 2.1 s2ram suspend -> wufc set to E1000_WUFC_LNKC, skip the subsequent suspend callbacks.
> 
> Is it safe to keep E1000_WUFC_LNKC enabled here?
> 
> From commit 6bf6be1127f7 ("e1000e: Do not wake up the system via WOL if device wakeup is disabled"):
> 
>        /* Runtime suspend should only enable wakeup for link changes */
>        if (runtime)
>                wufc = E1000_WUFC_LNKC;
>        else if (device_may_wakeup(&pdev->dev))
>                wufc = adapter->wol;
>        else
>                wufc = 0;
> 
> So it has different wakeup settings for runtime suspend and system suspend, either device_may_wakeup() true or false.
Right.
> Or maybe e1000e devs can confirm E1000_WUFC_LNKC is a safe for system suspend?
>
Does 'safe' here mean waking up the system?
For s2ram, whether the NIC can wake up the system from S3 via cable plug is platform
(BIOS) specific. So the wufc settings here is not directly related to system wake up
via plug event.
thanks,
Chenyu