[Intel-wired-lan] [PATCH v7] i40e: add support for PTP external synchronization clock
Maciej Fijalkowski
maciej.fijalkowski at intel.com
Tue Dec 8 11:01:30 UTC 2020
On Mon, Dec 07, 2020 at 09:47:57PM +0000, Piotr Kwapulinski wrote:
> Add support for external synchronization clock via GPIOs.
> 1PPS signals are handled via the dedicated 3 GPIOs: SDP3_2,
> SDP3_3 and GPIO_4.
> Previously it was not possible to use the external PTP
> synchronization clock.
I'm with Paul over here, how should we review this?
>
> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov at intel.com>
> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski at intel.com>
> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski at intel.com>
> ---
> v7:
> - remove unnecessary IOCTLs
Please keep the history of revision changes, not just the last one.
>
> drivers/net/ethernet/intel/i40e/i40e.h | 67 ++
> drivers/net/ethernet/intel/i40e/i40e_main.c | 10 +-
> drivers/net/ethernet/intel/i40e/i40e_ptp.c | 705 +++++++++++++++++-
> .../net/ethernet/intel/i40e/i40e_register.h | 26 +
> 4 files changed, 789 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
> index 425d620..888d32f 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e.h
> +++ b/drivers/net/ethernet/intel/i40e/i40e.h
> @@ -425,6 +425,8 @@ struct i40e_channel {
> struct i40e_vsi *parent_vsi;
> };
>
> +struct i40e_ptp_pins_settings;
Is that a global var?
> +
> static inline bool i40e_is_channel_macvlan(struct i40e_channel *ch)
> {
> return !!ch->fwd;
> @@ -641,12 +643,72 @@ struct i40e_pf {
> struct i40e_rx_pb_config pb_cfg; /* Current Rx packet buffer config */
> struct i40e_dcbx_config tmp_cfg;
>
> +/* GPIO defines used by PTP */
> +#define I40E_SDP3_2 18
> +#define I40E_SDP3_3 19
> +#define I40E_GPIO_4 20
> +#define I40E_LED2_0 26
> +#define I40E_LED2_1 27
> +#define I40E_LED3_0 28
> +#define I40E_LED3_1 29
> +#define I40E_GLGEN_GPIO_SET_SDP_DATA_HI \
> + (1 << I40E_GLGEN_GPIO_SET_SDP_DATA_SHIFT)
> +#define I40E_GLGEN_GPIO_SET_DRV_SDP_DATA \
> + (1 << I40E_GLGEN_GPIO_SET_DRIVE_SDP_SHIFT)
> +#define I40E_GLGEN_GPIO_CTL_PRT_NUM_0 \
> + (0 << I40E_GLGEN_GPIO_CTL_PRT_NUM_SHIFT)
> +#define I40E_GLGEN_GPIO_CTL_PRT_NUM_1 \
> + (1 << I40E_GLGEN_GPIO_CTL_PRT_NUM_SHIFT)
> +#define I40E_GLGEN_GPIO_CTL_RESERVED BIT(2)
> +#define I40E_GLGEN_GPIO_CTL_DIR_OUT \
> + (1 << I40E_GLGEN_GPIO_CTL_PIN_DIR_SHIFT)
> +#define I40E_GLGEN_GPIO_CTL_TRI_DRV_HI \
> + (1 << I40E_GLGEN_GPIO_CTL_TRI_CTL_SHIFT)
> +#define I40E_GLGEN_GPIO_CTL_OUT_HI_RST \
> + (1 << I40E_GLGEN_GPIO_CTL_OUT_CTL_SHIFT)
> +#define I40E_GLGEN_GPIO_CTL_TIMESYNC_0 \
> + (3 << I40E_GLGEN_GPIO_CTL_PIN_FUNC_SHIFT)
> +#define I40E_GLGEN_GPIO_CTL_TIMESYNC_1 \
> + (4 << I40E_GLGEN_GPIO_CTL_PIN_FUNC_SHIFT)
> +#define I40E_GLGEN_GPIO_CTL_NOT_FOR_PHY_CONN \
> + (0x3F << I40E_GLGEN_GPIO_CTL_PHY_PIN_NAME_SHIFT)
> +#define I40E_GLGEN_GPIO_CTL_PORT_0_IN_TIMESYNC_0 \
> + (I40E_GLGEN_GPIO_CTL_NOT_FOR_PHY_CONN | \
> + I40E_GLGEN_GPIO_CTL_TIMESYNC_0 | \
> + I40E_GLGEN_GPIO_CTL_RESERVED | I40E_GLGEN_GPIO_CTL_PRT_NUM_0)
> +#define I40E_GLGEN_GPIO_CTL_PORT_1_IN_TIMESYNC_0 \
> + (I40E_GLGEN_GPIO_CTL_NOT_FOR_PHY_CONN | \
> + I40E_GLGEN_GPIO_CTL_TIMESYNC_0 | \
> + I40E_GLGEN_GPIO_CTL_RESERVED | I40E_GLGEN_GPIO_CTL_PRT_NUM_1)
> +#define I40E_GLGEN_GPIO_CTL_PORT_0_OUT_TIMESYNC_1 \
> + (I40E_GLGEN_GPIO_CTL_NOT_FOR_PHY_CONN | \
> + I40E_GLGEN_GPIO_CTL_TIMESYNC_1 | I40E_GLGEN_GPIO_CTL_OUT_HI_RST | \
> + I40E_GLGEN_GPIO_CTL_TRI_DRV_HI | I40E_GLGEN_GPIO_CTL_DIR_OUT | \
> + I40E_GLGEN_GPIO_CTL_RESERVED | I40E_GLGEN_GPIO_CTL_PRT_NUM_0)
> +#define I40E_GLGEN_GPIO_CTL_PORT_1_OUT_TIMESYNC_1 \
> + (I40E_GLGEN_GPIO_CTL_NOT_FOR_PHY_CONN | \
> + I40E_GLGEN_GPIO_CTL_TIMESYNC_1 | I40E_GLGEN_GPIO_CTL_OUT_HI_RST | \
> + I40E_GLGEN_GPIO_CTL_TRI_DRV_HI | I40E_GLGEN_GPIO_CTL_DIR_OUT | \
> + I40E_GLGEN_GPIO_CTL_RESERVED | I40E_GLGEN_GPIO_CTL_PRT_NUM_1)
> +#define I40E_PRTTSYN_AUX_1_INSTNT \
> + (1 << I40E_PRTTSYN_AUX_1_INSTNT_SHIFT)
> +#define I40E_PRTTSYN_AUX_0_OUT_ENABLE \
> + (1 << I40E_PRTTSYN_AUX_0_OUT_ENA_SHIFT)
> +#define I40E_PRTTSYN_AUX_0_OUT_CLK_MOD (3 << I40E_PRTTSYN_AUX_0_OUTMOD_SHIFT)
> +#define I40E_PRTTSYN_AUX_0_OUT_ENABLE_CLK_MOD \
> + (I40E_PRTTSYN_AUX_0_OUT_ENABLE | I40E_PRTTSYN_AUX_0_OUT_CLK_MOD)
> +#define I40E_PTP_HALF_SECOND 500000000LL /* nano seconds */
> +#define I40E_PTP_2_SEC_DELAY 2
I think that placement of these defines makes hard to follow the content
of i40e_pf struct. It's just too many of those.
> +
> struct ptp_clock *ptp_clock;
> struct ptp_clock_info ptp_caps;
> struct sk_buff *ptp_tx_skb;
> unsigned long ptp_tx_start;
> struct hwtstamp_config tstamp_config;
> struct timespec64 ptp_prev_hw_time;
> + struct work_struct ptp_pps_work;
> + struct work_struct ptp_extts0_work;
> + struct work_struct ptp_extts1_work;
You only make use of ptp_extts0_work?? Whats with two other work structs?
> ktime_t ptp_reset_start;
> struct mutex tmreg_lock; /* Used to protect the SYSTIME registers. */
> u32 ptp_adj_mult;
> @@ -654,10 +716,14 @@ struct i40e_pf {
> u32 tx_hwtstamp_skipped;
> u32 rx_hwtstamp_cleared;
> u32 latch_event_flags;
> + u64 ptp_pps_start;
> + u32 pps_delay;
> spinlock_t ptp_rx_lock; /* Used to protect Rx timestamp registers. */
> + struct ptp_pin_desc ptp_pin[3];
> unsigned long latch_events[4];
> bool ptp_tx;
> bool ptp_rx;
> + struct i40e_ptp_pins_settings *ptp_pins;
It looks like you placed new members pretty randomly. Have you checked
with pahole the layout of struct after your changes?
> u16 rss_table_size; /* HW RSS table size */
> u32 max_bw;
> u32 min_bw;
> @@ -1165,6 +1231,7 @@ void i40e_ptp_save_hw_time(struct i40e_pf *pf);
> void i40e_ptp_restore_hw_time(struct i40e_pf *pf);
> void i40e_ptp_init(struct i40e_pf *pf);
> void i40e_ptp_stop(struct i40e_pf *pf);
> +int i40e_ptp_alloc_pins(struct i40e_pf *pf);
> int i40e_is_vsi_uplink_mode_veb(struct i40e_vsi *vsi);
> i40e_status i40e_get_partition_bw_setting(struct i40e_pf *pf);
> i40e_status i40e_set_partition_bw_setting(struct i40e_pf *pf);
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
> index 6643c6e3..c758fa0 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_main.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
> @@ -4073,10 +4073,13 @@ static irqreturn_t i40e_intr(int irq, void *data)
> if (icr0 & I40E_PFINT_ICR0_TIMESYNC_MASK) {
> u32 prttsyn_stat = rd32(hw, I40E_PRTTSYN_STAT_0);
>
> - if (prttsyn_stat & I40E_PRTTSYN_STAT_0_TXTIME_MASK) {
> - icr0 &= ~I40E_PFINT_ICR0_ENA_TIMESYNC_MASK;
> + if (prttsyn_stat & I40E_PRTTSYN_STAT_0_EVENT0_MASK)
> + schedule_work(&pf->ptp_extts0_work);
So, why do we need to defer this? ptp_clock_event() can't be run in irq
context? Please explain.
> +
> + if (prttsyn_stat & I40E_PRTTSYN_STAT_0_TXTIME_MASK)
> i40e_ptp_tx_hwtstamp(pf);
> - }
> +
> + icr0 &= ~I40E_PFINT_ICR0_ENA_TIMESYNC_MASK;
> }
>
> /* If a critical error is pending we have no choice but to reset the
> @@ -15450,6 +15453,7 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
> if (is_valid_ether_addr(hw->mac.port_addr))
> pf->hw_features |= I40E_HW_PORT_ID_VALID;
>
> + i40e_ptp_alloc_pins(pf);
> pci_set_drvdata(pdev, pf);
> pci_save_state(pdev);
> #ifdef CONFIG_I40E_DCB
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_ptp.c b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> index 7a87961..6f523e2 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
> @@ -3,6 +3,7 @@
>
> #include "i40e.h"
> #include <linux/ptp_classify.h>
> +#include <linux/posix-clock.h>
>
> /* The XL710 timesync is very much like Intel's 82599 design when it comes to
> * the fundamental clock design. However, the clock operations are much simpler
> @@ -19,10 +20,231 @@
> #define I40E_PTP_40GB_INCVAL 0x0199999999ULL
> #define I40E_PTP_10GB_INCVAL_MULT 2
> #define I40E_PTP_1GB_INCVAL_MULT 20
> +#define I40E_ISGN 0x80000000
>
> #define I40E_PRTTSYN_CTL1_TSYNTYPE_V1 BIT(I40E_PRTTSYN_CTL1_TSYNTYPE_SHIFT)
> #define I40E_PRTTSYN_CTL1_TSYNTYPE_V2 (2 << \
> I40E_PRTTSYN_CTL1_TSYNTYPE_SHIFT)
> +#define I40E_SUBDEV_ID_25G_PTP_PIN 0xB
> +#define to_dev(obj) container_of(obj, struct device, kobj)
> +
> +enum i40e_ptp_pin {
> + SDP3_2 = 0,
> + SDP3_3,
> + GPIO_4
> +};
> +
> +static struct ptp_pin_desc sdp_desc[] = {
> + /* name idx func chan */
> + {"SDP3_2", SDP3_2, PTP_PF_NONE, 0},
> + {"SDP3_3", SDP3_3, PTP_PF_NONE, 1},
> + {"GPIO_4", GPIO_4, PTP_PF_NONE, 1},
> +};
> +
> +enum i40e_ptp_gpio_pin_state {
> + end = -2,
> + invalid,
> + off,
> + in_A,
> + in_B,
> + out_A,
> + out_B,
> +};
> +
> +static const char * const i40e_ptp_gpio_pin_state2str[] = {
> + "off", "in_A", "in_B", "out_A", "out_B"
> +};
> +
> +enum i40e_ptp_led_pin_state {
> + led_end = -2,
> + low = 0,
> + high,
> +};
> +
> +struct i40e_ptp_pins_settings {
> + enum i40e_ptp_gpio_pin_state sdp3_2;
> + enum i40e_ptp_gpio_pin_state sdp3_3;
> + enum i40e_ptp_gpio_pin_state gpio_4;
> + enum i40e_ptp_led_pin_state led2_0;
> + enum i40e_ptp_led_pin_state led2_1;
> + enum i40e_ptp_led_pin_state led3_0;
> + enum i40e_ptp_led_pin_state led3_1;
> +};
> +
> +static const struct i40e_ptp_pins_settings
> + i40e_ptp_pin_led_allowed_states[] = {
> + {off, off, off, high, high, high, high},
> + {off, in_A, off, high, high, high, low},
> + {off, out_A, off, high, low, high, high},
> + {off, in_B, off, high, high, high, low},
> + {off, out_B, off, high, low, high, high},
> + {in_A, off, off, high, high, high, low},
> + {in_A, in_B, off, high, high, high, low},
> + {in_A, out_B, off, high, low, high, high},
> + {out_A, off, off, high, low, high, high},
> + {out_A, in_B, off, high, low, high, high},
> + {in_B, off, off, high, high, high, low},
> + {in_B, in_A, off, high, high, high, low},
> + {in_B, out_A, off, high, low, high, high},
> + {out_B, off, off, high, low, high, high},
> + {out_B, in_A, off, high, low, high, high},
> + {off, off, in_A, high, high, low, high},
> + {off, out_A, in_A, high, low, low, high},
> + {off, in_B, in_A, high, high, low, low},
> + {off, out_B, in_A, high, low, low, high},
> + {out_A, off, in_A, high, low, low, high},
> + {out_A, in_B, in_A, high, low, low, high},
> + {in_B, off, in_A, high, high, low, low},
> + {in_B, out_A, in_A, high, low, low, high},
> + {out_B, off, in_A, high, low, low, high},
> + {off, off, out_A, low, high, high, high},
> + {off, in_A, out_A, low, high, high, low},
> + {off, in_B, out_A, low, high, high, low},
> + {off, out_B, out_A, low, low, high, high},
> + {in_A, off, out_A, low, high, high, low},
> + {in_A, in_B, out_A, low, high, high, low},
> + {in_A, out_B, out_A, low, low, high, high},
> + {in_B, off, out_A, low, high, high, low},
> + {in_B, in_A, out_A, low, high, high, low},
> + {out_B, off, out_A, low, low, high, high},
> + {out_B, in_A, out_A, low, low, high, high},
> + {off, off, in_B, high, high, low, high},
> + {off, in_A, in_B, high, high, low, low},
> + {off, out_A, in_B, high, low, low, high},
> + {off, out_B, in_B, high, low, low, high},
> + {in_A, off, in_B, high, high, low, low},
> + {in_A, out_B, in_B, high, low, low, high},
> + {out_A, off, in_B, high, low, low, high},
> + {out_B, off, in_B, high, low, low, high},
> + {out_B, in_A, in_B, high, low, low, high},
> + {off, off, out_B, low, high, high, high},
> + {off, in_A, out_B, low, high, high, low},
> + {off, out_A, out_B, low, low, high, high},
> + {off, in_B, out_B, low, high, high, low},
> + {in_A, off, out_B, low, high, high, low},
> + {in_A, in_B, out_B, low, high, high, low},
> + {out_A, off, out_B, low, low, high, high},
> + {out_A, in_B, out_B, low, low, high, high},
> + {in_B, off, out_B, low, high, high, low},
> + {in_B, in_A, out_B, low, high, high, low},
> + {in_B, out_A, out_B, low, low, high, high},
> + {end, end, end, led_end, led_end, led_end, led_end}
> +};
> +
> +static int i40e_ptp_set_pins(struct i40e_pf *pf,
> + struct i40e_ptp_pins_settings *pins);
Could we avoid the forward declaration?
> +
> +/**
> + * i40e_ptp_extts0_work - workqueue task function
> + * @work: workqueue task structure
> + *
> + * Service for PTP external clock event
> + **/
> +static void i40e_ptp_extts0_work(struct work_struct *work)
> +{
> + struct i40e_pf *pf = container_of(work, struct i40e_pf,
> + ptp_extts0_work);
> + struct i40e_hw *hw = &pf->hw;
> + struct ptp_clock_event event;
> + u32 hi, lo;
> +
> + /* Event time is captured by one of the two matched registers
> + * PRTTSYN_EVNT_L: 32 LSB of sampled time event
> + * PRTTSYN_EVNT_H: 32 MSB of sampled time event
> + * Event is defined in PRTTSYN_EVNT_0 register
> + */
> + lo = rd32(hw, I40E_PRTTSYN_EVNT_L(0));
> + hi = rd32(hw, I40E_PRTTSYN_EVNT_H(0));
> +
> + event.timestamp = (((u64)hi) << 32) | lo;
> +
> + event.type = PTP_CLOCK_EXTTS;
> + event.index = 0;
> +
> + /* fire event */
> + ptp_clock_event(pf->ptp_clock, &event);
> +}
> +
> +/**
> + * i40e_is_ptp_pin_dev - check if device supports PTP pins
> + * @hw: pointer to the hardware structure
> + *
> + * Return true if device supports PTP pins, false otherwise.
> + **/
> +static bool i40e_is_ptp_pin_dev(struct i40e_hw *hw)
> +{
> + return hw->device_id == I40E_DEV_ID_25G_SFP28 &&
> + hw->subsystem_device_id == I40E_SUBDEV_ID_25G_PTP_PIN;
> +}
> +
> +/**
> + * i40e_can_do_pins - check possibility of manipulating the pins
> + * @pf: board private structure
> + *
> + * Check if all conditions are satisfied to manipulate PTP pins.
> + * Return true if pins can be manipulated or false otherwise.
> + **/
> +static bool i40e_can_do_pins(struct i40e_pf *pf)
> +{
> + if (!i40e_is_ptp_pin_dev(&pf->hw)) {
> + dev_warn(&pf->pdev->dev,
> + "PTP external clock not supported.\n");
> + return false;
> + }
> +
> + if (!pf->ptp_pins || pf->hw.pf_id) {
> + dev_warn(&pf->pdev->dev,
> + "PTP PIN reading allowed for PF0 only.\n");
> + return false;
> + }
> +
> + return true;
> +}
> +
> +/**
> + * i40_ptp_reset_timing_events - Reset PTP timing events
> + * @pf: Board private structure
> + *
> + * This function resets timing events for pf.
> + **/
> +static void i40_ptp_reset_timing_events(struct i40e_pf *pf)
> +{
> + u32 i;
> +
> + spin_lock_bh(&pf->ptp_rx_lock);
Why _bh variant? What are you trying to protect here?
> + for (i = 0; i <= I40E_PRTTSYN_RXTIME_L_MAX_INDEX; i++) {
> + /* reading and automatically clearing timing events registers */
> + rd32(&pf->hw, I40E_PRTTSYN_RXTIME_L(i));
> + rd32(&pf->hw, I40E_PRTTSYN_RXTIME_H(i));
> + pf->latch_events[i] = 0;
> + }
> + /* reading and automatically clearing timing events registers */
> + rd32(&pf->hw, I40E_PRTTSYN_TXTIME_L);
> + rd32(&pf->hw, I40E_PRTTSYN_TXTIME_H);
> +
> + pf->tx_hwtstamp_timeouts = 0;
> + pf->tx_hwtstamp_skipped = 0;
> + pf->rx_hwtstamp_cleared = 0;
> + pf->latch_event_flags = 0;
> + spin_unlock_bh(&pf->ptp_rx_lock);
> +}
> +
> +/**
> + * i40e_ptp_verify - check pins
> + * @ptp: ptp clock
> + * @pin: pin index
> + * @func: assigned function
> + * @chan: channel
> + *
> + * Check pins consistency.
> + * Return 0 on success or error on failure.
> + **/
> +static int i40e_ptp_verify(struct ptp_clock_info *ptp, unsigned int pin,
> + enum ptp_pin_function func, unsigned int chan)
> +{
> + /* TODO: implement pin checking */
> + return 0;
> +}
>
> /**
> * i40e_ptp_read - Read the PHC time from the device
> @@ -135,6 +357,37 @@ static int i40e_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
> return 0;
> }
>
> +/**
> + * i40e_ptp_set_1pps_signal_hw - configure 1PPS PTP signal for pins
> + * @pf: the PF private data structure
> + *
> + * Configure 1PPS signal used for PTP pins
> + **/
> +static void i40e_ptp_set_1pps_signal_hw(struct i40e_pf *pf)
> +{
> + struct i40e_hw *hw = &pf->hw;
> + struct timespec64 now;
> + u64 ns;
> +
> + wr32(hw, I40E_PRTTSYN_AUX_0(1), 0);
> + wr32(hw, I40E_PRTTSYN_AUX_1(1), I40E_PRTTSYN_AUX_1_INSTNT);
> + wr32(hw, I40E_PRTTSYN_AUX_0(1), I40E_PRTTSYN_AUX_0_OUT_ENABLE);
> +
> + i40e_ptp_read(pf, &now, NULL);
> + now.tv_sec += I40E_PTP_2_SEC_DELAY;
> + now.tv_nsec = 0;
> + ns = timespec64_to_ns(&now);
> +
> + /* I40E_PRTTSYN_TGT_L(1) */
> + wr32(hw, I40E_PRTTSYN_TGT_L(1), ns & 0xFFFFFFFF);
> + /* I40E_PRTTSYN_TGT_H(1) */
> + wr32(hw, I40E_PRTTSYN_TGT_H(1), ns >> 32);
> + wr32(hw, I40E_PRTTSYN_CLKO(1), I40E_PTP_HALF_SECOND);
> + wr32(hw, I40E_PRTTSYN_AUX_1(1), I40E_PRTTSYN_AUX_1_INSTNT);
> + wr32(hw, I40E_PRTTSYN_AUX_0(1),
> + I40E_PRTTSYN_AUX_0_OUT_ENABLE_CLK_MOD);
> +}
> +
> /**
> * i40e_ptp_adjtime - Adjust the PHC time
> * @ptp: The PTP clock structure
> @@ -145,14 +398,35 @@ static int i40e_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
> static int i40e_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
> {
> struct i40e_pf *pf = container_of(ptp, struct i40e_pf, ptp_caps);
> - struct timespec64 now, then;
> + struct i40e_hw *hw = &pf->hw;
>
> - then = ns_to_timespec64(delta);
> mutex_lock(&pf->tmreg_lock);
>
> - i40e_ptp_read(pf, &now, NULL);
> - now = timespec64_add(now, then);
> - i40e_ptp_write(pf, (const struct timespec64 *)&now);
> + if (delta > -999999900LL && delta < 999999900LL) {
> + int neg_adj = 0;
> + u32 timadj;
> + u64 tohw;
> +
> + if (delta < 0) {
> + neg_adj = 1;
> + tohw = -delta;
> + } else {
> + tohw = delta;
> + }
> +
> + timadj = tohw & 0x3FFFFFFF;
> + if (neg_adj)
> + timadj |= I40E_ISGN;
> + wr32(hw, I40E_PRTTSYN_ADJ, timadj);
> + } else {
> + struct timespec64 then, now;
> +
> + then = ns_to_timespec64(delta);
> + i40e_ptp_read(pf, &now, NULL);
> + now = timespec64_add(now, then);
> + i40e_ptp_write(pf, (const struct timespec64 *)&now);
> + i40e_ptp_set_1pps_signal_hw(pf);
> + }
>
> mutex_unlock(&pf->tmreg_lock);
>
> @@ -183,7 +457,7 @@ static int i40e_ptp_gettimex(struct ptp_clock_info *ptp, struct timespec64 *ts,
> /**
> * i40e_ptp_settime - Set the time of the PHC
> * @ptp: The PTP clock structure
> - * @ts: timespec structure that holds the new time value
> + * @ts: timespec64 structure that holds the new time value
> *
> * Set the device clock to the user input value. The conversion from timespec
> * to ns happens in the write function.
> @@ -201,18 +475,140 @@ static int i40e_ptp_settime(struct ptp_clock_info *ptp,
> }
>
> /**
> - * i40e_ptp_feature_enable - Enable/disable ancillary features of the PHC subsystem
> + * i40e_pps_configure - configure PPS events
> + * @ptp: ptp clock
> + * @rq: clock request
> + * @on: status
> + *
> + * Configure PPS events for external clock source.
> + * Return 0 on success or error on failure.
> + **/
> +static int i40e_pps_configure(struct ptp_clock_info *ptp,
> + struct ptp_clock_request *rq,
> + int on)
> +{
> + /* TODO: implement PPS events */
> + return 0;
> +}
> +
> +/**
> + * i40e_pin_state - determine PIN state
> + * @index: PIN index
> + * @func: function assigned to PIN
> + *
> + * Determine PIN state based on PIN index and function assigned.
> + * Return PIN state.
> + **/
> +static enum i40e_ptp_gpio_pin_state i40e_pin_state(int index, int func)
> +{
> + enum i40e_ptp_gpio_pin_state state = off;
> +
> + if (index == 0 && func == PTP_PF_EXTTS)
> + state = in_A;
> + if (index == 1 && func == PTP_PF_EXTTS)
> + state = in_B;
> + if (index == 0 && func == PTP_PF_PEROUT)
> + state = out_A;
> + if (index == 1 && func == PTP_PF_PEROUT)
> + state = out_B;
> +
> + return state;
> +}
> +
> +/**
> + * i40e_ptp_enable_pin - enable PINs.
> + * @pf: private board structure
> + * @chan: channel
> + * @func: PIN function
> + * @on: state
> + *
> + * Enable PTP pins for external clock source.
> + * Return 0 on success or error code on failure.
> + **/
> +static int i40e_ptp_enable_pin(struct i40e_pf *pf, unsigned int chan,
> + enum ptp_pin_function func, int on)
> +{
> + enum i40e_ptp_gpio_pin_state *pin = NULL;
> + struct i40e_ptp_pins_settings pins;
> + int pin_index;
> +
> + /* Preserve previous state of pins that we don't touch */
> + pins.sdp3_2 = pf->ptp_pins->sdp3_2;
> + pins.sdp3_3 = pf->ptp_pins->sdp3_3;
> + pins.gpio_4 = pf->ptp_pins->gpio_4;
> +
> + /* To turn on the pin - find the corresponding one based on
> + * the given index. To to turn the function off - find
> + * which pin had it assigned. Don't use ptp_find_pin here
> + * because it tries to lock the pincfg_mux which is locked by
> + * ptp_pin_store() that calls here.
> + */
> + if (on) {
> + pin_index = ptp_find_pin(pf->ptp_clock, func, chan);
> + if (pin_index < 0)
> + return -EBUSY;
> +
> + switch (pin_index) {
> + case SDP3_2:
> + pin = &pins.sdp3_2;
> + break;
> + case SDP3_3:
> + pin = &pins.sdp3_3;
> + break;
> + case GPIO_4:
> + pin = &pins.gpio_4;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + *pin = i40e_pin_state(chan, func);
> + } else {
> + if (pins.sdp3_2 == i40e_pin_state(chan, func))
> + pins.sdp3_2 = off;
> + if (pins.sdp3_3 == i40e_pin_state(chan, func))
> + pins.sdp3_3 = off;
> + if (pins.gpio_4 == i40e_pin_state(chan, func))
> + pins.gpio_4 = off;
> + }
> +
> + return i40e_ptp_set_pins(pf, &pins) ? -EINVAL : 0;
> +}
> +
> +/**
> + * i40e_ptp_feature_enable - Enable external clock pins
> * @ptp: The PTP clock structure
> - * @rq: The requested feature to change
> - * @on: Enable/disable flag
> + * @rq: The PTP clock request structure
> + * @on: To turn feature on/off
> *
> - * The XL710 does not support any of the ancillary features of the PHC
> - * subsystem, so this function may just return.
> + * Setting on/off PTP PPS feature for pin.
> **/
> static int i40e_ptp_feature_enable(struct ptp_clock_info *ptp,
> - struct ptp_clock_request *rq, int on)
> + struct ptp_clock_request *rq,
> + int on)
> {
> - return -EOPNOTSUPP;
> + struct i40e_pf *pf = container_of(ptp, struct i40e_pf, ptp_caps);
> +
> + enum ptp_pin_function func;
> + unsigned int chan;
> +
> + /* TODO: Implement flags handling for EXTTS and PEROUT */
> + switch (rq->type) {
> + case PTP_CLK_REQ_EXTTS:
> + func = PTP_PF_EXTTS;
> + chan = rq->extts.index;
> + break;
> + case PTP_CLK_REQ_PEROUT:
> + func = PTP_PF_PEROUT;
> + chan = rq->perout.index;
> + break;
> + case PTP_CLK_REQ_PPS:
> + return i40e_pps_configure(ptp, rq, on);
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + return i40e_ptp_enable_pin(pf, chan, func, on);
> }
>
> /**
> @@ -523,6 +919,203 @@ int i40e_ptp_get_ts_config(struct i40e_pf *pf, struct ifreq *ifr)
> -EFAULT : 0;
> }
>
> +/**
> + * i40e_ptp_free_pins - free memory used by PTP pins
> + * @pf: Board private structure
> + *
> + * Release memory allocated for PTP pins.
> + **/
> +static void i40e_ptp_free_pins(struct i40e_pf *pf)
> +{
> + if (pf->hw.pf_id == 0 && i40e_is_ptp_pin_dev(&pf->hw)) {
> + kfree(pf->ptp_pins);
> + kfree(pf->ptp_caps.pin_config);
> + pf->ptp_pins = NULL;
> + }
> +}
> +
> +/**
> + * i40e_ptp_set_pin_hw - Set HW GPIO pin
> + * @hw: pointer to the hardware structure
> + * @pin: pin index
> + * @state: pin state
> + *
> + * Set status of GPIO pin for external clock handling.
> + **/
> +static void i40e_ptp_set_pin_hw(struct i40e_hw *hw,
> + unsigned int pin,
> + enum i40e_ptp_gpio_pin_state state)
> +{
> + switch (state) {
> + case off:
> + wr32(hw, I40E_GLGEN_GPIO_CTL(pin), 0);
> + break;
> + case in_A:
> + wr32(hw, I40E_GLGEN_GPIO_CTL(pin),
> + I40E_GLGEN_GPIO_CTL_PORT_0_IN_TIMESYNC_0);
> + break;
> + case in_B:
> + wr32(hw, I40E_GLGEN_GPIO_CTL(pin),
> + I40E_GLGEN_GPIO_CTL_PORT_1_IN_TIMESYNC_0);
> + break;
> + case out_A:
> + wr32(hw, I40E_GLGEN_GPIO_CTL(pin),
> + I40E_GLGEN_GPIO_CTL_PORT_0_OUT_TIMESYNC_1);
> + break;
> + case out_B:
> + wr32(hw, I40E_GLGEN_GPIO_CTL(pin),
> + I40E_GLGEN_GPIO_CTL_PORT_1_OUT_TIMESYNC_1);
> + break;
> + default:
> + break;
> + }
> +}
> +
> +/**
> + * i40e_ptp_set_led_hw - Set HW GPIO led
> + * @hw: pointer to the hardware structure
> + * @led: led index
> + * @state: led state
> + *
> + * Set status of GPIO led for external clock handling.
> + **/
> +static void i40e_ptp_set_led_hw(struct i40e_hw *hw,
> + unsigned int led,
> + enum i40e_ptp_led_pin_state state)
> +{
> + switch (state) {
> + case low:
> + wr32(hw, I40E_GLGEN_GPIO_SET,
> + I40E_GLGEN_GPIO_SET_DRV_SDP_DATA | led);
> + break;
> + case high:
> + wr32(hw, I40E_GLGEN_GPIO_SET,
> + I40E_GLGEN_GPIO_SET_DRV_SDP_DATA |
> + I40E_GLGEN_GPIO_SET_SDP_DATA_HI | led);
> + break;
> + default:
> + break;
> + }
> +}
> +
> +/**
> + * i40e_ptp_set_pins_hw - Set HW GPIO pins
> + * @pf: Board private structure
> + *
> + * This function sets GPIO pins for PTP
> + **/
> +static void i40e_ptp_set_pins_hw(struct i40e_pf *pf)
> +{
> + const struct i40e_ptp_pins_settings *pins = pf->ptp_pins;
> + struct i40e_hw *hw = &pf->hw;
> +
> + /* pin must be disabled before it may be used */
> + i40e_ptp_set_pin_hw(hw, I40E_SDP3_2, off);
> + i40e_ptp_set_pin_hw(hw, I40E_SDP3_3, off);
> + i40e_ptp_set_pin_hw(hw, I40E_GPIO_4, off);
> +
> + i40e_ptp_set_pin_hw(hw, I40E_SDP3_2, pins->sdp3_2);
> + i40e_ptp_set_pin_hw(hw, I40E_SDP3_3, pins->sdp3_3);
> + i40e_ptp_set_pin_hw(hw, I40E_GPIO_4, pins->gpio_4);
> +
> + i40e_ptp_set_led_hw(hw, I40E_LED2_0, pins->led2_0);
> + i40e_ptp_set_led_hw(hw, I40E_LED2_1, pins->led2_1);
> + i40e_ptp_set_led_hw(hw, I40E_LED3_0, pins->led3_0);
> + i40e_ptp_set_led_hw(hw, I40E_LED3_1, pins->led3_1);
> +
> + dev_info(&pf->pdev->dev,
> + "PTP configuration set to: SDP3_2: %s, SDP3_3: %s, GPIO_4: %s.\n",
> + i40e_ptp_gpio_pin_state2str[pins->sdp3_2],
> + i40e_ptp_gpio_pin_state2str[pins->sdp3_3],
> + i40e_ptp_gpio_pin_state2str[pins->gpio_4]);
> +}
> +
> +/**
> + * i40e_ptp_set_pins - set PTP pins in HW
> + * @pf: Board private structure
> + * @pins: PTP pins to be applied
> + *
> + * Validate and set PTP pins in HW for specific PF.
> + * Return 0 on success or negative value on error.
> + **/
> +static int i40e_ptp_set_pins(struct i40e_pf *pf,
> + struct i40e_ptp_pins_settings *pins)
> +{
> + int i = 0;
> +
> + if (!i40e_can_do_pins(pf))
> + return -EOPNOTSUPP;
> +
> + if (pins->sdp3_2 == invalid)
> + pins->sdp3_2 = pf->ptp_pins->sdp3_2;
> + if (pins->sdp3_3 == invalid)
> + pins->sdp3_3 = pf->ptp_pins->sdp3_3;
> + if (pins->gpio_4 == invalid)
> + pins->gpio_4 = pf->ptp_pins->gpio_4;
> + while (i40e_ptp_pin_led_allowed_states[i].sdp3_2 != end) {
> + if (pins->sdp3_2 == i40e_ptp_pin_led_allowed_states[i].sdp3_2 &&
> + pins->sdp3_3 == i40e_ptp_pin_led_allowed_states[i].sdp3_3 &&
> + pins->gpio_4 == i40e_ptp_pin_led_allowed_states[i].gpio_4) {
> + pins->led2_0 =
> + i40e_ptp_pin_led_allowed_states[i].led2_0;
> + pins->led2_1 =
> + i40e_ptp_pin_led_allowed_states[i].led2_1;
> + pins->led3_0 =
> + i40e_ptp_pin_led_allowed_states[i].led3_0;
> + pins->led3_1 =
> + i40e_ptp_pin_led_allowed_states[i].led3_1;
> + break;
> + }
> + i++;
> + }
> + if (i40e_ptp_pin_led_allowed_states[i].sdp3_2 == end) {
> + dev_warn(&pf->pdev->dev,
> + "Unsupported PTP pin configuration: SDP3_2: %s, SDP3_3: %s, GPIO_4: %s.\n",
> + i40e_ptp_gpio_pin_state2str[pins->sdp3_2],
> + i40e_ptp_gpio_pin_state2str[pins->sdp3_3],
> + i40e_ptp_gpio_pin_state2str[pins->gpio_4]);
> +
> + return -EPERM;
> + }
> + memcpy(pf->ptp_pins, pins, sizeof(*pins));
> + i40e_ptp_set_pins_hw(pf);
> + i40_ptp_reset_timing_events(pf);
> +
> + return 0;
> +}
> +
> +/**
> + * i40e_ptp_alloc_pins - allocate PTP pins structure
> + * @pf: Board private structure
> + *
> + * allocate PTP pins structure
> + **/
> +int i40e_ptp_alloc_pins(struct i40e_pf *pf)
> +{
> + if (pf->hw.pf_id || !i40e_is_ptp_pin_dev(&pf->hw))
> + return 0;
> +
> + pf->ptp_pins =
> + kzalloc(sizeof(struct i40e_ptp_pins_settings), GFP_KERNEL);
> +
> + if (!pf->ptp_pins) {
> + dev_warn(&pf->pdev->dev, "Cannot allocate memory for PTP pins structure.\n");
> + return -I40E_ERR_NO_MEMORY;
> + }
> +
> + pf->ptp_pins->sdp3_2 = off;
> + pf->ptp_pins->sdp3_3 = off;
> + pf->ptp_pins->gpio_4 = off;
> + pf->ptp_pins->led2_0 = high;
> + pf->ptp_pins->led2_1 = high;
> + pf->ptp_pins->led3_0 = high;
> + pf->ptp_pins->led3_1 = high;
> +
> + i40e_ptp_set_pins_hw(pf);
> +
> + return 0;
> +}
> +
> /**
> * i40e_ptp_set_timestamp_mode - setup hardware for requested timestamp mode
> * @pf: Board private structure
> @@ -541,6 +1134,21 @@ static int i40e_ptp_set_timestamp_mode(struct i40e_pf *pf,
> struct i40e_hw *hw = &pf->hw;
> u32 tsyntype, regval;
>
> + /* Selects external trigger to cause event */
> + regval = rd32(hw, I40E_PRTTSYN_AUX_0(0));
> + /* Bit 17:16 is EVNTLVL, 01B rising edge */
> + regval &= 0;
> + regval |= (1 << I40E_PRTTSYN_AUX_0_EVNTLVL_SHIFT);
> + /* regval: 0001 0000 0000 0000 0000 */
> + wr32(hw, I40E_PRTTSYN_AUX_0(0), regval);
> +
> + /* Enabel interrupts */
> + regval = rd32(hw, I40E_PRTTSYN_CTL0);
> + regval |= 1 << I40E_PRTTSYN_CTL0_EVENT_INT_ENA_SHIFT;
> + wr32(hw, I40E_PRTTSYN_CTL0, regval);
> +
> + INIT_WORK(&pf->ptp_extts0_work, i40e_ptp_extts0_work);
> +
> /* Reserved for future extensions. */
> if (config->flags)
> return -EINVAL;
> @@ -683,6 +1291,48 @@ int i40e_ptp_set_ts_config(struct i40e_pf *pf, struct ifreq *ifr)
> -EFAULT : 0;
> }
>
> +/**
> + * i40e_init_pin_config - initialize pins.
> + * @pf: private board structure
> + *
> + * Initialize pins for external clock source.
> + * Return 0 on success or error code on failure.
> + **/
> +static int i40e_init_pin_config(struct i40e_pf *pf)
> +{
> + int i;
> +
> + if (pf->hw.pf_id != 0)
> + return -EOPNOTSUPP;
> +
> + pf->ptp_caps.n_pins = 3;
> + pf->ptp_caps.n_ext_ts = 2;
> + pf->ptp_caps.pps = 1;
> + pf->ptp_caps.n_per_out = 2;
> +
> + pf->ptp_caps.pin_config = kcalloc(pf->ptp_caps.n_pins,
> + sizeof(*pf->ptp_caps.pin_config),
> + GFP_KERNEL);
> + if (!pf->ptp_caps.pin_config)
> + return -ENOMEM;
> +
> + for (i = 0; i < pf->ptp_caps.n_pins; i++) {
> + snprintf(pf->ptp_caps.pin_config[i].name,
> + sizeof(pf->ptp_caps.pin_config[i].name),
> + "%s", sdp_desc[i].name);
> + pf->ptp_caps.pin_config[i].index = sdp_desc[i].index;
> + pf->ptp_caps.pin_config[i].func = PTP_PF_NONE;
> + pf->ptp_caps.pin_config[i].chan = sdp_desc[i].chan;
> + }
> +
> + pf->ptp_caps.verify = i40e_ptp_verify;
> + pf->ptp_caps.enable = i40e_ptp_feature_enable;
> +
> + pf->ptp_caps.pps = 1;
> +
> + return 0;
> +}
> +
> /**
> * i40e_ptp_create_clock - Create PTP clock device for userspace
> * @pf: Board private structure
> @@ -703,13 +1353,16 @@ static long i40e_ptp_create_clock(struct i40e_pf *pf)
> sizeof(pf->ptp_caps.name) - 1);
> pf->ptp_caps.owner = THIS_MODULE;
> pf->ptp_caps.max_adj = 999999999;
> - pf->ptp_caps.n_ext_ts = 0;
> - pf->ptp_caps.pps = 0;
> pf->ptp_caps.adjfreq = i40e_ptp_adjfreq;
> pf->ptp_caps.adjtime = i40e_ptp_adjtime;
> pf->ptp_caps.gettimex64 = i40e_ptp_gettimex;
> pf->ptp_caps.settime64 = i40e_ptp_settime;
> - pf->ptp_caps.enable = i40e_ptp_feature_enable;
> + if (i40e_is_ptp_pin_dev(&pf->hw)) {
> + int err = i40e_init_pin_config(pf);
> +
> + if (err)
> + return err;
> + }
>
> /* Attempt to register the clock before enabling the hardware. */
> pf->ptp_clock = ptp_clock_register(&pf->ptp_caps, &pf->pdev->dev);
> @@ -839,6 +1492,8 @@ void i40e_ptp_init(struct i40e_pf *pf)
> /* Restore the clock time based on last known value */
> i40e_ptp_restore_hw_time(pf);
> }
> +
> + i40e_ptp_set_1pps_signal_hw(pf);
> }
>
> /**
> @@ -850,6 +1505,9 @@ void i40e_ptp_init(struct i40e_pf *pf)
> **/
> void i40e_ptp_stop(struct i40e_pf *pf)
> {
> + struct i40e_hw *hw = &pf->hw;
> + u32 regval;
> +
> pf->flags &= ~I40E_FLAG_PTP;
> pf->ptp_tx = false;
> pf->ptp_rx = false;
> @@ -868,4 +1526,19 @@ void i40e_ptp_stop(struct i40e_pf *pf)
> dev_info(&pf->pdev->dev, "%s: removed PHC on %s\n", __func__,
> pf->vsi[pf->lan_vsi]->netdev->name);
> }
> +
> + i40e_ptp_set_pin_hw(hw, I40E_SDP3_2, off);
> + i40e_ptp_set_pin_hw(hw, I40E_SDP3_3, off);
> + i40e_ptp_set_pin_hw(hw, I40E_GPIO_4, off);
> +
> + regval = rd32(hw, I40E_PRTTSYN_AUX_0(0));
> + regval &= ~I40E_PRTTSYN_AUX_0_PTPFLAG_MASK;
> + wr32(hw, I40E_PRTTSYN_AUX_0(0), regval);
> +
> + /* Disable interrupts */
> + regval = rd32(hw, I40E_PRTTSYN_CTL0);
> + regval &= ~I40E_PRTTSYN_CTL0_EVENT_INT_ENA_MASK;
> + wr32(hw, I40E_PRTTSYN_CTL0, regval);
> +
> + i40e_ptp_free_pins(pf);
> }
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_register.h b/drivers/net/ethernet/intel/i40e/i40e_register.h
> index ab9973a..28a073e 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_register.h
> +++ b/drivers/net/ethernet/intel/i40e/i40e_register.h
> @@ -182,11 +182,18 @@
> #define I40E_GLGEN_GPIO_CTL_PRT_NUM_MASK I40E_MASK(0x3, I40E_GLGEN_GPIO_CTL_PRT_NUM_SHIFT)
> #define I40E_GLGEN_GPIO_CTL_PRT_NUM_NA_SHIFT 3
> #define I40E_GLGEN_GPIO_CTL_PRT_NUM_NA_MASK I40E_MASK(0x1, I40E_GLGEN_GPIO_CTL_PRT_NUM_NA_SHIFT)
> +#define I40E_GLGEN_GPIO_CTL_PIN_DIR_SHIFT 4
> +#define I40E_GLGEN_GPIO_CTL_TRI_CTL_SHIFT 5
> +#define I40E_GLGEN_GPIO_CTL_OUT_CTL_SHIFT 6
> #define I40E_GLGEN_GPIO_CTL_PIN_FUNC_SHIFT 7
> #define I40E_GLGEN_GPIO_CTL_PIN_FUNC_MASK I40E_MASK(0x7, I40E_GLGEN_GPIO_CTL_PIN_FUNC_SHIFT)
> #define I40E_GLGEN_GPIO_CTL_LED_BLINK_SHIFT 11
> #define I40E_GLGEN_GPIO_CTL_LED_MODE_SHIFT 12
> #define I40E_GLGEN_GPIO_CTL_LED_MODE_MASK I40E_MASK(0x1F, I40E_GLGEN_GPIO_CTL_LED_MODE_SHIFT)
> +#define I40E_GLGEN_GPIO_CTL_PHY_PIN_NAME_SHIFT 20
> +#define I40E_GLGEN_GPIO_SET 0x00088184 /* Reset: POR */
> +#define I40E_GLGEN_GPIO_SET_SDP_DATA_SHIFT 5
> +#define I40E_GLGEN_GPIO_SET_DRIVE_SDP_SHIFT 6
> #define I40E_GLGEN_MDIO_I2C_SEL(_i) (0x000881C0 + ((_i) * 4)) /* _i=0...3 */ /* Reset: POR */
> #define I40E_GLGEN_MSCA(_i) (0x0008818C + ((_i) * 4)) /* _i=0...3 */ /* Reset: POR */
> #define I40E_GLGEN_MSCA_MDIADD_SHIFT 0
> @@ -742,6 +749,8 @@
> #define I40E_PRTTSYN_CTL0 0x001E4200 /* Reset: GLOBR */
> #define I40E_PRTTSYN_CTL0_TXTIME_INT_ENA_SHIFT 1
> #define I40E_PRTTSYN_CTL0_TXTIME_INT_ENA_MASK I40E_MASK(0x1, I40E_PRTTSYN_CTL0_TXTIME_INT_ENA_SHIFT)
> +#define I40E_PRTTSYN_CTL0_EVENT_INT_ENA_SHIFT 2
> +#define I40E_PRTTSYN_CTL0_EVENT_INT_ENA_MASK I40E_MASK(0x1, I40E_PRTTSYN_CTL0_EVENT_INT_ENA_SHIFT)
> #define I40E_PRTTSYN_CTL0_PF_ID_SHIFT 8
> #define I40E_PRTTSYN_CTL0_PF_ID_MASK I40E_MASK(0xF, I40E_PRTTSYN_CTL0_PF_ID_SHIFT)
> #define I40E_PRTTSYN_CTL0_TSYNENA_SHIFT 31
> @@ -760,7 +769,10 @@
> #define I40E_PRTTSYN_INC_L 0x001E4040 /* Reset: GLOBR */
> #define I40E_PRTTSYN_RXTIME_H(_i) (0x00085040 + ((_i) * 32)) /* _i=0...3 */ /* Reset: CORER */
> #define I40E_PRTTSYN_RXTIME_L(_i) (0x000850C0 + ((_i) * 32)) /* _i=0...3 */ /* Reset: CORER */
> +#define I40E_PRTTSYN_RXTIME_L_MAX_INDEX 3
> #define I40E_PRTTSYN_STAT_0 0x001E4220 /* Reset: GLOBR */
> +#define I40E_PRTTSYN_STAT_0_EVENT0_SHIFT 0
> +#define I40E_PRTTSYN_STAT_0_EVENT0_MASK I40E_MASK(0x1, I40E_PRTTSYN_STAT_0_EVENT0_SHIFT)
> #define I40E_PRTTSYN_STAT_0_TXTIME_SHIFT 4
> #define I40E_PRTTSYN_STAT_0_TXTIME_MASK I40E_MASK(0x1, I40E_PRTTSYN_STAT_0_TXTIME_SHIFT)
> #define I40E_PRTTSYN_STAT_1 0x00085140 /* Reset: CORER */
> @@ -768,6 +780,20 @@
> #define I40E_PRTTSYN_TIME_L 0x001E4100 /* Reset: GLOBR */
> #define I40E_PRTTSYN_TXTIME_H 0x001E41E0 /* Reset: GLOBR */
> #define I40E_PRTTSYN_TXTIME_L 0x001E41C0 /* Reset: GLOBR */
> +#define I40E_PRTTSYN_EVNT_H(_i) (0x001E40C0 + ((_i) * 32)) /* _i=0...1 */ /* Reset: GLOBR */
> +#define I40E_PRTTSYN_EVNT_L(_i) (0x001E4080 + ((_i) * 32)) /* _i=0...1 */ /* Reset: GLOBR */
> +#define I40E_PRTTSYN_AUX_0(_i) (0x001E42A0 + ((_i) * 32)) /* _i=0...1 */ /* Reset: GLOBR */
> +#define I40E_PRTTSYN_AUX_0_OUT_ENA_SHIFT 0
> +#define I40E_PRTTSYN_AUX_0_OUTMOD_SHIFT 1
> +#define I40E_PRTTSYN_AUX_0_EVNTLVL_SHIFT 16
> +#define I40E_PRTTSYN_AUX_0_PTPFLAG_SHIFT 17
> +#define I40E_PRTTSYN_AUX_0_PTPFLAG_MASK I40E_MASK(0x1, I40E_PRTTSYN_AUX_0_PTPFLAG_SHIFT)
> +#define I40E_PRTTSYN_AUX_1(_i) (0x001E42E0 + ((_i) * 32)) /* _i=0...1 */ /* Reset: GLOBR */
> +#define I40E_PRTTSYN_AUX_1_INSTNT_SHIFT 0
> +#define I40E_PRTTSYN_TGT_H(_i) (0x001E4180 + ((_i) * 32)) /* _i=0...1 */ /* Reset: GLOBR */
> +#define I40E_PRTTSYN_TGT_L(_i) (0x001E4140 + ((_i) * 32)) /* _i=0...1 */ /* Reset: GLOBR */
> +#define I40E_PRTTSYN_CLKO(_i) (0x001E4240 + ((_i) * 32)) /* _i=0...1 */ /* Reset: GLOBR */
> +#define I40E_PRTTSYN_ADJ 0x001E4280 /* Reset: GLOBR */
> #define I40E_GL_MDET_RX 0x0012A510 /* Reset: CORER */
> #define I40E_GL_MDET_RX_FUNCTION_SHIFT 0
> #define I40E_GL_MDET_RX_FUNCTION_MASK I40E_MASK(0xFF, I40E_GL_MDET_RX_FUNCTION_SHIFT)
> --
> 2.17.1
>
> _______________________________________________
> Intel-wired-lan mailing list
> Intel-wired-lan at osuosl.org
> https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
More information about the Intel-wired-lan
mailing list