[Intel-wired-lan] [PATCH v5 4/4] e1000e: Export S0ix flags to ethtool

Hans de Goede hdegoede at redhat.com
Tue Dec 15 12:49:17 UTC 2020


Hi,

On 12/14/20 8:29 PM, Mario Limonciello wrote:
> This flag can be used by an end user to disable S0ix flows on a
> buggy system or by an OEM for development purposes.
> 
> If you need this flag to be persisted across reboots, it's suggested
> to use a udev rule to call adjust it until the kernel could have your
> configuration in a disallow list.
> 
> Signed-off-by: Mario Limonciello <mario.limonciello at dell.com>

Thanks, patch looks good to me:

Reviewed-by: Hans de Goede <hdegoede at redhat.com>

Regards,

Hans

> ---
>  drivers/net/ethernet/intel/e1000e/e1000.h   |  1 +
>  drivers/net/ethernet/intel/e1000e/ethtool.c | 46 +++++++++++++++++++++
>  drivers/net/ethernet/intel/e1000e/netdev.c  |  9 ++--
>  3 files changed, 52 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
> index ba7a0f8f6937..5b2143f4b1f8 100644
> --- a/drivers/net/ethernet/intel/e1000e/e1000.h
> +++ b/drivers/net/ethernet/intel/e1000e/e1000.h
> @@ -436,6 +436,7 @@ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca);
>  #define FLAG2_DFLT_CRC_STRIPPING          BIT(12)
>  #define FLAG2_CHECK_RX_HWTSTAMP           BIT(13)
>  #define FLAG2_CHECK_SYSTIM_OVERFLOW       BIT(14)
> +#define FLAG2_ENABLE_S0IX_FLOWS           BIT(15)
>  
>  #define E1000_RX_DESC_PS(R, i)	    \
>  	(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
> diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
> index 03215b0aee4b..06442e6bef73 100644
> --- a/drivers/net/ethernet/intel/e1000e/ethtool.c
> +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
> @@ -23,6 +23,13 @@ struct e1000_stats {
>  	int stat_offset;
>  };
>  
> +static const char e1000e_priv_flags_strings[][ETH_GSTRING_LEN] = {
> +#define E1000E_PRIV_FLAGS_S0IX_ENABLED	BIT(0)
> +	"s0ix-enabled",
> +};
> +
> +#define E1000E_PRIV_FLAGS_STR_LEN ARRAY_SIZE(e1000e_priv_flags_strings)
> +
>  #define E1000_STAT(str, m) { \
>  		.stat_string = str, \
>  		.type = E1000_STATS, \
> @@ -1776,6 +1783,8 @@ static int e1000e_get_sset_count(struct net_device __always_unused *netdev,
>  		return E1000_TEST_LEN;
>  	case ETH_SS_STATS:
>  		return E1000_STATS_LEN;
> +	case ETH_SS_PRIV_FLAGS:
> +		return E1000E_PRIV_FLAGS_STR_LEN;
>  	default:
>  		return -EOPNOTSUPP;
>  	}
> @@ -2097,6 +2106,10 @@ static void e1000_get_strings(struct net_device __always_unused *netdev,
>  			p += ETH_GSTRING_LEN;
>  		}
>  		break;
> +	case ETH_SS_PRIV_FLAGS:
> +		memcpy(data, e1000e_priv_flags_strings,
> +		       E1000E_PRIV_FLAGS_STR_LEN * ETH_GSTRING_LEN);
> +		break;
>  	}
>  }
>  
> @@ -2305,6 +2318,37 @@ static int e1000e_get_ts_info(struct net_device *netdev,
>  	return 0;
>  }
>  
> +static u32 e1000e_get_priv_flags(struct net_device *netdev)
> +{
> +	struct e1000_adapter *adapter = netdev_priv(netdev);
> +	u32 priv_flags = 0;
> +
> +	if (adapter->flags2 & FLAG2_ENABLE_S0IX_FLOWS)
> +		priv_flags |= E1000E_PRIV_FLAGS_S0IX_ENABLED;
> +
> +	return priv_flags;
> +}
> +
> +static int e1000e_set_priv_flags(struct net_device *netdev, u32 priv_flags)
> +{
> +	struct e1000_adapter *adapter = netdev_priv(netdev);
> +	unsigned int flags2 = adapter->flags2;
> +
> +	flags2 &= ~FLAG2_ENABLE_S0IX_FLOWS;
> +	if (priv_flags & E1000E_PRIV_FLAGS_S0IX_ENABLED) {
> +		struct e1000_hw *hw = &adapter->hw;
> +
> +		if (hw->mac.type < e1000_pch_cnp)
> +			return -EINVAL;
> +		flags2 |= FLAG2_ENABLE_S0IX_FLOWS;
> +	}
> +
> +	if (flags2 != adapter->flags2)
> +		adapter->flags2 = flags2;
> +
> +	return 0;
> +}
> +
>  static const struct ethtool_ops e1000_ethtool_ops = {
>  	.supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS,
>  	.get_drvinfo		= e1000_get_drvinfo,
> @@ -2336,6 +2380,8 @@ static const struct ethtool_ops e1000_ethtool_ops = {
>  	.set_eee		= e1000e_set_eee,
>  	.get_link_ksettings	= e1000_get_link_ksettings,
>  	.set_link_ksettings	= e1000_set_link_ksettings,
> +	.get_priv_flags		= e1000e_get_priv_flags,
> +	.set_priv_flags		= e1000e_set_priv_flags,
>  };
>  
>  void e1000e_set_ethtool_ops(struct net_device *netdev)
> diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
> index b9800ba2006c..e9b82c209c2d 100644
> --- a/drivers/net/ethernet/intel/e1000e/netdev.c
> +++ b/drivers/net/ethernet/intel/e1000e/netdev.c
> @@ -6923,7 +6923,6 @@ static __maybe_unused int e1000e_pm_suspend(struct device *dev)
>  	struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
>  	struct e1000_adapter *adapter = netdev_priv(netdev);
>  	struct pci_dev *pdev = to_pci_dev(dev);
> -	struct e1000_hw *hw = &adapter->hw;
>  	int rc;
>  
>  	e1000e_flush_lpic(pdev);
> @@ -6935,7 +6934,7 @@ static __maybe_unused int e1000e_pm_suspend(struct device *dev)
>  		e1000e_pm_thaw(dev);
>  	} else {
>  		/* Introduce S0ix implementation */
> -		if (hw->mac.type >= e1000_pch_cnp)
> +		if (adapter->flags2 & FLAG2_ENABLE_S0IX_FLOWS)
>  			e1000e_s0ix_entry_flow(adapter);
>  	}
>  
> @@ -6947,11 +6946,10 @@ static __maybe_unused int e1000e_pm_resume(struct device *dev)
>  	struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
>  	struct e1000_adapter *adapter = netdev_priv(netdev);
>  	struct pci_dev *pdev = to_pci_dev(dev);
> -	struct e1000_hw *hw = &adapter->hw;
>  	int rc;
>  
>  	/* Introduce S0ix implementation */
> -	if (hw->mac.type >= e1000_pch_cnp)
> +	if (adapter->flags2 & FLAG2_ENABLE_S0IX_FLOWS)
>  		e1000e_s0ix_exit_flow(adapter);
>  
>  	rc = __e1000_resume(pdev);
> @@ -7615,6 +7613,9 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
>  	if (!(adapter->flags & FLAG_HAS_AMT))
>  		e1000e_get_hw_control(adapter);
>  
> +	if (hw->mac.type >= e1000_pch_cnp)
> +		adapter->flags2 |= FLAG2_ENABLE_S0IX_FLOWS;
> +
>  	strlcpy(netdev->name, "eth%d", sizeof(netdev->name));
>  	err = register_netdev(netdev);
>  	if (err)
> 



More information about the Intel-wired-lan mailing list