[Intel-wired-lan] [PATCH 1/3] PCI/ASPM: Use the path max in L1 ASPM latency check

Ian Kumlien ian.kumlien at gmail.com
Tue Dec 15 13:09:12 UTC 2020


On Tue, Dec 15, 2020 at 1:40 AM Bjorn Helgaas <helgaas at kernel.org> wrote:
>
> On Mon, Dec 14, 2020 at 11:56:31PM +0100, Ian Kumlien wrote:
> > On Mon, Dec 14, 2020 at 8:19 PM Bjorn Helgaas <helgaas at kernel.org> wrote:
>
> > > If you're interested, you could probably unload the Realtek drivers,
> > > remove the devices, and set the PCI_EXP_LNKCTL_LD (Link Disable) bit
> > > in 02:04.0, e.g.,
> > >
> > >   # RT=/sys/devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:04.0
> > >   # echo 1 > $RT/0000:04:00.0/remove
> > >   # echo 1 > $RT/0000:04:00.1/remove
> > >   # echo 1 > $RT/0000:04:00.2/remove
> > >   # echo 1 > $RT/0000:04:00.4/remove
> > >   # echo 1 > $RT/0000:04:00.7/remove
> > >   # setpci -s02:04.0 CAP_EXP+0x10.w=0x0010
> > >
> > > That should take 04:00.x out of the picture.
> >
> > Didn't actually change the behaviour, I'm suspecting an errata for AMD pcie...
> >
> > So did this, with unpatched kernel:
> > [ ID] Interval           Transfer     Bitrate         Retr  Cwnd
> > [  5]   0.00-1.00   sec  4.56 MBytes  38.2 Mbits/sec    0   67.9 KBytes
> > [  5]   1.00-2.00   sec  4.47 MBytes  37.5 Mbits/sec    0   96.2 KBytes
> > [  5]   2.00-3.00   sec  4.85 MBytes  40.7 Mbits/sec    0   50.9 KBytes
> > [  5]   3.00-4.00   sec  4.23 MBytes  35.4 Mbits/sec    0   70.7 KBytes
> > [  5]   4.00-5.00   sec  4.23 MBytes  35.4 Mbits/sec    0   48.1 KBytes
> > [  5]   5.00-6.00   sec  4.23 MBytes  35.4 Mbits/sec    0   45.2 KBytes
> > [  5]   6.00-7.00   sec  4.23 MBytes  35.4 Mbits/sec    0   36.8 KBytes
> > [  5]   7.00-8.00   sec  3.98 MBytes  33.4 Mbits/sec    0   36.8 KBytes
> > [  5]   8.00-9.00   sec  4.23 MBytes  35.4 Mbits/sec    0   36.8 KBytes
> > [  5]   9.00-10.00  sec  4.23 MBytes  35.4 Mbits/sec    0   48.1 KBytes
> > - - - - - - - - - - - - - - - - - - - - - - - - -
> > [ ID] Interval           Transfer     Bitrate         Retr
> > [  5]   0.00-10.00  sec  43.2 MBytes  36.2 Mbits/sec    0             sender
> > [  5]   0.00-10.00  sec  42.7 MBytes  35.8 Mbits/sec                  receiver
> >
> > and:
> > echo 0 > /sys/devices/pci0000:00/0000:00:01.2/0000:01:00.0/link/l1_aspm
>
> BTW, thanks a lot for testing out the "l1_aspm" sysfs file.  I'm very
> pleased that it seems to be working as intended.

It was nice to find it for easy disabling :)

> > and:
> > [ ID] Interval           Transfer     Bitrate         Retr  Cwnd
> > [  5]   0.00-1.00   sec   113 MBytes   951 Mbits/sec  153    772 KBytes
> > [  5]   1.00-2.00   sec   109 MBytes   912 Mbits/sec  276    550 KBytes
> > [  5]   2.00-3.00   sec   111 MBytes   933 Mbits/sec  123    625 KBytes
> > [  5]   3.00-4.00   sec   111 MBytes   933 Mbits/sec   31    687 KBytes
> > [  5]   4.00-5.00   sec   110 MBytes   923 Mbits/sec    0    679 KBytes
> > [  5]   5.00-6.00   sec   110 MBytes   923 Mbits/sec  136    577 KBytes
> > [  5]   6.00-7.00   sec   110 MBytes   923 Mbits/sec  214    645 KBytes
> > [  5]   7.00-8.00   sec   110 MBytes   923 Mbits/sec   32    628 KBytes
> > [  5]   8.00-9.00   sec   110 MBytes   923 Mbits/sec   81    537 KBytes
> > [  5]   9.00-10.00  sec   110 MBytes   923 Mbits/sec   10    577 KBytes
> > - - - - - - - - - - - - - - - - - - - - - - - - -
> > [ ID] Interval           Transfer     Bitrate         Retr
> > [  5]   0.00-10.00  sec  1.08 GBytes   927 Mbits/sec  1056             sender
> > [  5]   0.00-10.00  sec  1.07 GBytes   923 Mbits/sec                  receiver
> >
> > But this only confirms that the fix i experience is a side effect.
> >
> > The original code is still wrong :)
>
> What exactly is this machine?  Brand, model, config?  Maybe you could
> add this and a dmesg log to the buzilla?  It seems like other people
> should be seeing the same problem, so I'm hoping to grub around on the
> web to see if there are similar reports involving these devices.

ASUS Pro WS X570-ACE with AMD Ryzen 9 3900X

> https://bugzilla.kernel.org/show_bug.cgi?id=209725
>
> Here's one that is superficially similar:
> https://linux-hardware.org/index.php?probe=e5f24075e5&log=lspci_all
> in that it has a RP -- switch -- I211 path.  Interestingly, the switch
> here advertises <64us L1 exit latency instead of the <32us latency
> your switch advertises.  Of course, I can't tell if it's exactly the
> same switch.

Same chipset it seems

I'm running bios version:
        Version: 2206
        Release Date: 08/13/2020

ANd latest is:
Version 3003
2020/12/07

Will test upgrading that as well, but it could be that they report the
incorrect latency of the switch - I don't know how many things AGESA
changes but... It's been updated twice since my upgrade.

> Bjorn


More information about the Intel-wired-lan mailing list