[Intel-wired-lan] [PATCH net-next v3 0/9] igc: Add support for AF_XDP zero-copy
Vedang Patel
vedang.patel at intel.com
Tue Feb 9 02:42:34 UTC 2021
Hi all,
This is the third version of this series which adds AF_XDP zero-copy support
to igc driver.
The main changes from v2 are:
- In igc_clean_rx_ring(), clear large buffer bit after calling
dma_unmap_page_attrs(). dma_unmap_page_attrs() needs the buffer
size in order to unmap the page.
- In igc_clean_rx_irq_zc(), the Rx hardware timestamp is needed if
the BPF program returns XDP_PASS and the packet needs to be passed
to the network stack.
Known issues:
When an XDP application is running in Tx-Only mode with Zero-Copy
enabled, it is not expected to add the frames to the fill-queue. I have
noticed the following two issues in this scenario:
- If XDP_USE_NEED_WAKEUP flag is not set by application, igc_poll()
will go into infinite loop because the buffer allocation resulting
in igc_clean_rx_irq_zc() indicating that all work is not done and NAPI
should keep polling. This does not occur if XDP_USE_NEED_WAKEUP
flag is set.
- Since there are no buffers allocated by userspace for the fill
queue, there is no memory allocated for the NIC to copy the data
to. If the packet received is destined to the hardware queue where
XDP application is running, no packets are received even on other
queues.
Both these issues can be mitigated by adding a few frames to the
fill queue. The second issue can also be mitigated by making sure no
packets are being received on the hardware queue where Rx is running.
v2 is here:
https://patchwork.ozlabs.org/project/intel-wired-lan/cover/20201223203705.78705-1-andre.guedes@intel.com/
v1 is here:
https://patchwork.ozlabs.org/project/intel-wired-lan/cover/20201217202415.77891-1-andre.guedes@intel.com/
Thanks,
Vedang
Andre Guedes (9):
igc: Move igc_xdp_is_enabled()
igc: Refactor igc_xdp_run_prog()
igc: Refactor igc_clean_rx_ring()
igc: Refactor XDP rxq info registration
igc: Introduce tx/rx stats helpers
igc: Introduce igc_unmap_tx_buffer() helper
igc: Replace IGC_TX_FLAGS_XDP flag by an enum
igc: Enable RX via AF_XDP zero-copy
igc: Enable TX via AF_XDP zero-copy
drivers/net/ethernet/intel/igc/igc.h | 33 +-
drivers/net/ethernet/intel/igc/igc_base.h | 2 +
drivers/net/ethernet/intel/igc/igc_main.c | 651 ++++++++++++++++++----
drivers/net/ethernet/intel/igc/igc_xdp.c | 107 +++-
drivers/net/ethernet/intel/igc/igc_xdp.h | 8 +-
5 files changed, 674 insertions(+), 127 deletions(-)
--
2.17.1
More information about the Intel-wired-lan
mailing list