[Intel-wired-lan] [PATCH next-queue v3 3/3] igc: Add support for PTP getcrosststamp()
Bjorn Helgaas
helgaas at kernel.org
Tue Mar 23 19:39:23 UTC 2021
On Mon, Mar 22, 2021 at 09:18:22AM -0700, Vinicius Costa Gomes wrote:
> i225 has support for PCIe PTM, which allows us to implement support
> for the PTP_SYS_OFFSET_PRECISE ioctl(), implemented in the driver via
> the getcrosststamp() function.
> +static bool igc_is_ptm_supported(struct igc_adapter *adapter)
> +{
> +#if IS_ENABLED(CONFIG_X86_TSC) && IS_ENABLED(CONFIG_PCIE_PTM)
> + return adapter->pdev->ptm_enabled;
> +#endif
It's not obvious why you make this x86-specific. Maybe a comment?
You shouldn't have to test for CONFIG_PCIE_PTM, either. We probably
should have a pdev->ptm_enabled() predicate with a stub that returns
false when CONFIG_PCIE_PTM is not set.
> + return false;
> +}
> +/* PCIe Registers */
> +#define IGC_PTM_CTRL 0x12540 /* PTM Control */
> +#define IGC_PTM_STAT 0x12544 /* PTM Status */
> +#define IGC_PTM_CYCLE_CTRL 0x1254C /* PTM Cycle Control */
> +
> +/* PTM Time registers */
> +#define IGC_PTM_T1_TIM0_L 0x12558 /* T1 on Timer 0 Low */
> +#define IGC_PTM_T1_TIM0_H 0x1255C /* T1 on Timer 0 High */
> +
> +#define IGC_PTM_CURR_T2_L 0x1258C /* Current T2 Low */
> +#define IGC_PTM_CURR_T2_H 0x12590 /* Current T2 High */
> +#define IGC_PTM_PREV_T2_L 0x12584 /* Previous T2 Low */
> +#define IGC_PTM_PREV_T2_H 0x12588 /* Previous T2 High */
> +#define IGC_PTM_PREV_T4M1 0x12578 /* T4 Minus T1 on previous PTM Cycle */
> +#define IGC_PTM_CURR_T4M1 0x1257C /* T4 Minus T1 on this PTM Cycle */
> +#define IGC_PTM_PREV_T3M2 0x12580 /* T3 Minus T2 on previous PTM Cycle */
> +#define IGC_PTM_TDELAY 0x12594 /* PTM PCIe Link Delay */
> +
> +#define IGC_PCIE_DIG_DELAY 0x12550 /* PCIe Digital Delay */
> +#define IGC_PCIE_PHY_DELAY 0x12554 /* PCIe PHY Delay */
I assume the above are device-specific registers, right? Nothing that
would be found in the PCIe base spec?
Bjorn
More information about the Intel-wired-lan
mailing list