[Intel-wired-lan] [PATCH net v2] i40e: Fix PHY type identifiers for 2.5G and 5G adapters

[Mateusz Palczewski]

Unlike other supported adapters, 2.5G and 5G use different
PHY type identifiers for reading/writing PHY settings
and for reading link status. Introduce separate PHY
identifiers for these two operation types.

Fixes: 2e45d3f4677a("i40e: Add support for X710 B/P & SFP+ cards")
Signed-off-by: Dawid Lukwinski <dawid.lukwinski at intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski at intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov at intel.com>
Reviewed-by: Michal Maloszewski <michal.maloszewski at intel.com>
Reviewed-by: Sylwester Dziedziuch <sylwesterx.dziedziuch at intel.com>
---
 v2: Added missing changes in i40e_ethtool.c file
---
 drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h | 2 ++
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c    | 4 ++--
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
index ce626ea..78ba6b0 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
@@ -1568,6 +1568,8 @@ enum i40e_aq_phy_type {
 	I40E_PHY_TYPE_25GBASE_ACC		= 0x24,
 	I40E_PHY_TYPE_2_5GBASE_T		= 0x30,
 	I40E_PHY_TYPE_5GBASE_T			= 0x31,
+	I40E_PHY_TYPE_2_5GBASE_T_LINK_STATUS	= 0x30,
+	I40E_PHY_TYPE_5GBASE_T_LINK_STATUS	= 0x31,
 	I40E_PHY_TYPE_MAX,
 	I40E_PHY_TYPE_NOT_SUPPORTED_HIGH_TEMP	= 0xFD,
 	I40E_PHY_TYPE_EMPTY			= 0xFE,
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 96d5202..fe5befa 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -841,8 +841,8 @@ static void i40e_get_settings_link_up(struct i40e_hw *hw,
 							     10000baseT_Full);
 		break;
 	case I40E_PHY_TYPE_10GBASE_T:
-	case I40E_PHY_TYPE_5GBASE_T:
-	case I40E_PHY_TYPE_2_5GBASE_T:
+	case I40E_PHY_TYPE_5GBASE_T_LINK_STATUS:
+	case I40E_PHY_TYPE_2_5GBASE_T_LINK_STATUS:
 	case I40E_PHY_TYPE_1000BASE_T:
 	case I40E_PHY_TYPE_100BASE_TX:
 		ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
-- 
2.17.1