[Intel-wired-lan] [PATCH net v3] i40e: Fix PHY type identifiers for 2.5G and 5G adapters

[Mateusz Palczewski]

Unlike other supported adapters, 2.5G and 5G use different
PHY type identifiers for reading/writing PHY settings
and for reading link status. This commit introduces
separate PHY identifiers for these two operation types.

Fixes: 2e45d3f4677a ("i40e: Add support for X710 B/P & SFP+ cards")
Signed-off-by: Dawid Lukwinski <dawid.lukwinski at intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski at intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov at intel.com>
---
 v3: Added missing changes and fixed fixes tag
 v2: Added missing changes in i40e_ethtool.c file
--
 drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h | 6 ++++--
 drivers/net/ethernet/intel/i40e/i40e_common.c     | 4 ++--
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c    | 4 ++--
 drivers/net/ethernet/intel/i40e/i40e_type.h       | 7 ++-----
 4 files changed, 10 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
index ce626ea..140b677 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
@@ -1566,8 +1566,10 @@ enum i40e_aq_phy_type {
 	I40E_PHY_TYPE_25GBASE_LR		= 0x22,
 	I40E_PHY_TYPE_25GBASE_AOC		= 0x23,
 	I40E_PHY_TYPE_25GBASE_ACC		= 0x24,
-	I40E_PHY_TYPE_2_5GBASE_T		= 0x30,
-	I40E_PHY_TYPE_5GBASE_T			= 0x31,
+	I40E_PHY_TYPE_2_5GBASE_T		= 0x26,
+	I40E_PHY_TYPE_5GBASE_T			= 0x27,
+	I40E_PHY_TYPE_2_5GBASE_T_LINK_STATUS	= 0x30,
+	I40E_PHY_TYPE_5GBASE_T_LINK_STATUS	= 0x31,
 	I40E_PHY_TYPE_MAX,
 	I40E_PHY_TYPE_NOT_SUPPORTED_HIGH_TEMP	= 0xFD,
 	I40E_PHY_TYPE_EMPTY			= 0xFE,
diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index dd65aaa..b4d3fed 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -1042,8 +1042,8 @@ static enum i40e_media_type i40e_get_media_type(struct i40e_hw *hw)
 		break;
 	case I40E_PHY_TYPE_100BASE_TX:
 	case I40E_PHY_TYPE_1000BASE_T:
-	case I40E_PHY_TYPE_2_5GBASE_T:
-	case I40E_PHY_TYPE_5GBASE_T:
+	case I40E_PHY_TYPE_2_5GBASE_T_LINK_STATUS:
+	case I40E_PHY_TYPE_5GBASE_T_LINK_STATUS:
 	case I40E_PHY_TYPE_10GBASE_T:
 		media = I40E_MEDIA_TYPE_BASET;
 		break;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index fbe4fe9..b575ce4 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -841,8 +841,8 @@ static void i40e_get_settings_link_up(struct i40e_hw *hw,
 							     10000baseT_Full);
 		break;
 	case I40E_PHY_TYPE_10GBASE_T:
-	case I40E_PHY_TYPE_5GBASE_T:
-	case I40E_PHY_TYPE_2_5GBASE_T:
+	case I40E_PHY_TYPE_5GBASE_T_LINK_STATUS:
+	case I40E_PHY_TYPE_2_5GBASE_T_LINK_STATUS:
 	case I40E_PHY_TYPE_1000BASE_T:
 	case I40E_PHY_TYPE_100BASE_TX:
 		ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h
index 1fb13a7..36a4ca1 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_type.h
@@ -239,11 +239,8 @@ struct i40e_phy_info {
 #define I40E_CAP_PHY_TYPE_25GBASE_ACC BIT_ULL(I40E_PHY_TYPE_25GBASE_ACC + \
 					     I40E_PHY_TYPE_OFFSET)
 /* Offset for 2.5G/5G PHY Types value to bit number conversion */
-#define I40E_PHY_TYPE_OFFSET2 (-10)
-#define I40E_CAP_PHY_TYPE_2_5GBASE_T BIT_ULL(I40E_PHY_TYPE_2_5GBASE_T + \
-					     I40E_PHY_TYPE_OFFSET2)
-#define I40E_CAP_PHY_TYPE_5GBASE_T BIT_ULL(I40E_PHY_TYPE_5GBASE_T + \
-					     I40E_PHY_TYPE_OFFSET2)
+#define I40E_CAP_PHY_TYPE_2_5GBASE_T BIT_ULL(I40E_PHY_TYPE_2_5GBASE_T)
+#define I40E_CAP_PHY_TYPE_5GBASE_T BIT_ULL(I40E_PHY_TYPE_5GBASE_T)
 #define I40E_HW_CAP_MAX_GPIO			30
 /* Capabilities of a PF or a VF or the whole device */
 struct i40e_hw_capabilities {
-- 
2.17.1